Instructions
Table Of Contents
- Table of contents
- Introduction
- About discs
- Description of parts and controls
- Connections
- Operating external components with the remote control
- Basic operations
- Turning the system on/off
- Selecting the source to play
- Adjusting the volume [VOLUME]
- Listening with headphones (not supplied)
- Turning off the sound temporarily [MUTING]
- Adjusting the brightness of the indications [DIMMER]
- Sleep Timer [SLEEP]
- Adjusting the output level of the subwoofer and center/surround speakers [SUBWFR, CENTER, SURR L/R]
- Adjusting the treble sound [TREBLE]
- Changing the scan mode
- Optimizing the speaker settings [Smart Surround Setup]
- Playback
- Advanced operations
- Using the surround mode
- Using the on-screen bar
- Playing from a specified position on a disc
- Using the file control display
- Resume Playback
- Selecting a view angle
- Selecting the subtitle
- Selecting the audio
- Special picture playback
- Program Playback
- Random Playback
- Repeat Playback
- Tray lock
- Sound and other settings
- Setting DVD preferences
- Tuner operations
- AV COMPU LINK remote control system
- References
8
Connections
7 AM loop antenna
Setting up supplied AM loop antenna
Connecting AM loop antenna
• Turn the loop antenna until you have the best reception during
AM broadcast program reception.
NOTE
• Make sure the antenna conductors do not touch any other terminals,
connecting cords and power cords. This could cause poor reception.
If reception is poor
7 FM antenna
If reception is poor
NOTE
• We recommend that you use coaxial cable for the FM antenna as it is
well-shielded against interference.
Connecting the FM and
AM antennas
If the antenna cord is covered with the insulation
coat, twist and pull the insulation coat off and
remove.
1
Center unit
2
3
Antenna cord
Outdoor single vinyl-covered wire antenna
(not supplied)
AM loop antenna
Center unit
Extend the supplied FM antenna
horizontally.
Center unit
FM antenna (supplied)
Outdoor FM antenna
(not supplied)
Outdoor FM antenna cord
(not supplied)
Center unit
Standard type (75 C
coaxial) connector
Do not connect the power cord until all other connections have been made.
TH-M606-505-501-303-301[JC].book Page 8 Thursday, January 29, 2004 3:36 PM