TH-S430B TH-S430B-S Audio Home Theater System 2.
NOTE: For Spanish and French Manual, please visit www.jvcproducts.com/support NOTA: Para el Manual de Español y Francés, por favor visite www.jvcproducts.com/support REMARQUE: Pour l’espagnol et Français manuel, s’il vous plaît visitez www.jvcproducts.com/support Bluetooth SIG, Inc. and any use of such marks by AJS Electronics Limited is under license. Other trademarks and trade names are those of their respective owners. by E & S International Enterprises, Inc.
FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
/SVUXZGTZ 9GLKZ_ /TYZX[IZOUT Thank you for purchasing the home theater TH-S430B Soundbar. Please read this user manual carefully and keep for future reference. Warning Caution: To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture. No user-serviceable parts inside. Refer servicing to qualified personnel only. Plug on the power cord is used as disconnect device, the disconnect device shall be easily accessible.
6. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit. 7. The apparatus must not be exposed to dripping or splashing. Do not place objects filled with liquids such as vases, bottles or humidifiers on the unit. 8. To prevent fire or shock hazard, do not expose this equipment to direct heat, rain, moisture or dust. 9.
10. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. 11. The AC plug is used to disconnect the device, the disconnected device should remain readily operable.
Important Notes • This soundbar was especially developed for LED/LCD/Plasma TV's: It should not be used in combination with CRTTV's (Cathode Ray Tube TV's) in order to avoid image interference. • Safety and operating instruction manual should be retained for future reference. • The apparatus should not be exposed to dripping, splashing or placed in a humid atmosphere such as a bathroom. • Do not install the product in the following areas: • Places exposed to direct sunlight or close to radiators.
Product Diagram 5 6 7 9 8 1. DISPLAY 4.INPUT 7. OPTICAL 2. POWER/STANDBY 5. USB 8. HDMI (ARC) (CAN'T PLAY MP3 MUSIC, FOR SOFTWARE UPGRADE ONLY) 3. VOL+/- 9. AC IN 6. AUX 1. LED indicator: It indicates pairing between the soundbar and the subwoofer. 2. WPS Button: It automatically pairs the soundbar with subwoofer. 3. USB Port (CAN'T PLAY MP3 MUSIC, FOR SOFTWARE UPGRADE ONLY) 4 4.
Pair up with the subwoofer Plug the soundbar and the subwoofer into the mains sockets at the same time 1. Press "STANDBY" to turn the soundbar on after it has been connected the the AC. Then press "INPUT" to select Bluetooth (BT) as the input mode. This will cause the soundbar to enter into pairing mode with the wireless subwoofer. 2. Switch the subwoofer on. The blue LED will blink slowly indicating the unit have power but need to be paired with the soundbar.
REMOTE CONTROL 2. Pair button: Press pair button more than 2 seconds to conect and disconect last device. 3. VOL+: to increase the volume. 4. Previous button: Skip to the previous track in BT mode. 5. VOL-: to decrease the volume. 7. Treble-up button: to increase the treble volume. 8. Treble-down button: to decrease the treble volume. 10. Source input button: to select an input source for playback: Hd: sound from connected HDMI ARC device bt: sound from connected Bluetooth drive.
CAUTION Risk of explosion if the battery is replaced by an incorrect type Handling the battery • Improper or incorrect use of batteries may cause corrosion or battery leakage, which could cause fire, personal injury or damage to property. • Only use the battery type indicated in this manual. • Do not install new batteries with used ones and do not mix different types of batteries. • Do not dispose of used batteries as domestic waste. Dispose of them in accordance with local regulations.
6UYOZOUTOTM ZNK 9U[TJ (GX Table Placement • Place the sound bar horizontally on a solid surface such as a TV unit or shelves and align it centrally with the TV screen. • For best sound output and good airflow around the soundbar, place your soundbar and subwoofer as shown on the right.
Soundbar Pad Soundbar Pad or 100*55*40MM 4 75*35*5MM 5 When mounting the soundbar on a wall, all installation musted be performed in right way. The customer must never attempt to install it without authorization. Improper or inadequate installation may cause the sound bar to fall so as to result in personal injury.
OPERATE INSTRUCTIONS Setting the Soundbar 1: Plug the power cord into the mains, the display should light up. 2: Switch the soundbar on by pressing the power button on the soundbar or the STANDBY button on the remote. The default input mode will appear on the display after being switched on. 3: Select the input mode by pressing the power button again or by pressing the INPUT button on the remote.
AC IN Playing Audio via BT Connection 1. Turn the soundbar on, press the STANDBY button on the soundbar or the POWER button on the remote control to select the Bluetooth mode. When Bluetooth is selected, " " will be displayed on the LED display and the blue LED . on the soundbar will flicker followed by a double beep sound to indicate Bluetooth pairing mode is now active. 2. Turn the Bluetooth of your device on, search for " TH-S430B" on your Bluetooth list, and then select Bluetooth connection. 3.
4. If the connected device is moved away from wireless range (up to 10 meters) of the soundbar, then it will get disconnected, and it will successfully connect to the device once you re-enter Bluetooth range. To connect to other devices, repeat the above pairing steps. 5. If a Bluetooth device has been connected before, the soundbar will connect to the last connected device. Unpair this connection to connect a new device. 6. There is no automatic shutdown in pairing mode.
Optical Mode -Remove the cap of optical cable (keep the cap for the future use); check the direction of the plug. Connect the soundbar and TV with the optical cable. -Use this mode to play music from a TV with optical digital output on the sound bar. In TV sound settings, select the soundbar optical connection (output for audio). When the optical cable is connected, the TV audio output is set to PCM format. -The TV must have an optical digital output.
PROBLEM/TROUBLE POSSIBLE CAUSE SOLUTION Another input source is selected. Select an appropriate input source. The mute function is activated. Cancel the mute function. The volume of sound bar or TV/other device is adjusted too low. Increase the volume level on sound bar or by remote control or on TV. The power cable of the unit is not connected properly. Make sure that the power cable of the unit is connected to an AC wall outlet securely. Input jacks on a playback device are connected.
PROBLEM/TROUBLE Sound quality of audio play from a connected Bluetooth device is poor and connection is not stable. POSSIBLE CAUSE SOLUTION Move the device closer to the sound bar, or remove any obstacle between the device and the sound bar. The Bluetooth reception is poor. The volume on the Bluetooth device may be too low. No sound can be heard or sound breaks (Bluetooth mode) Bluetooth is not selected as the input source. Select the Bluetooth as the input source.
Package Contents Soundbar & Subwoofer X 1 Wall Mounting Bracket Sets X 1 Remote Control X 1 /LQH LQ WR 5&$ &DEOH ; User Manual X 1 Remote control battery Specifications Model TH-S430B & TH-S430B-S Technology BT/AUX/HDMI (ARC)/OPT Drivers 2.75" * 4+0.75”*2 + 6.
This product is manufactured, distributed, serviced and warranted exclusively by E & S International Enterprises, Inc. “JVC” is the trademark of JVCKENWOOD Corporation, used by such company under license. To obtain a warranty service, please call 1 (888) 582-8870 or send an email to support@jspus.
Claims and Dispute Resolution RUSSELL DISTRIBUTION COMPANY, LLC AND YOU AGREE THAT ALL CLAIMS OR DISPUTES ARISING IN ANY WAY FROM THIS LIMITED WARRANTY OR THE SALE, CONDITION OR PERFORMANCE OF THE PRODUCT, WHETH- ER BASED IN CONTRACT, TORT, STATUTORY, FRAUD, MISREPRESENTATION OR ANY OTHER LEGAL THEORY, AND ALL CLAIMS THAT ARE SUBJECT OFA PURPORTED CLASS ACTION LITIGATION THAT YOU ARE NOT A MEMBER OF THE CERTIFIED CLASS, SHALL BE RESOLVED THROUGH ARBITRATION AS PROVIDED FOR HEREIN, OR IN SMALL CLAIMS COURT,
This arbitration provision also applies to claims and disputes by you, the purchaser of the Product. and all those in privity with you, including your family members, beneficiaries and assigns against Russell Distribution subsidiaries and affiliates and any person or entity that licensed, supplied, sold or distributed the Product and each of their officers, employee, representatives, licensors/licensees, Agents, beneficiaries, predecessors in interest, successors, and/or assigns.
Audio Home Theater System 2.1CH Soundbar With Wireless Subwoofer TH-S430B TH-S430B-S Use our Customer Service to assist you in setting up your new product.
