User Guide

15
PICTURE SUB ADJ.
The standard value (“00”) of
the picture adjustment is
initially set at the factory.
You can adjust the standard
value as you want.
7 CONTRAST
• –20 O 00 O +20
7 BRIGHT
• –20 O 00 O +20
7 CHROMA
• –20 O 00 O +20
7 PHASE
• –20 O 00 O +20
COLOR TEMP./BAL.
Sets or adjusts the color
temperature and white
balance.
NOTE:
• Use the five items indicated with
mark to make fine
adjustments between the monitors.
7 COLOR TEMP.
Selects the color temperature.
HIGH: Sets the color temperature to 9300.
LOW: Sets the color temperature to 6500.
7 BLUE DRIVE
Adjusts the blue drive level.
• MIN O 000 O MAX (in 127 grades)
7 RED DRIVE
Adjusts the red drive level.
• MIN O 000 O MAX (in 127 grades)
7 GREEN CUTOFF
Adjusts the green cut-off point.
• MIN O MAX (in 155 grades)
7 BLUE CUTOFF
Adjusts the blue cut-off point.
• MIN O MAX (in 155 grades)
7 RED CUTOFF
Adjusts the red cut-off point.
• MIN O MAX (in 155 grades)
SIZE/POSI. ADJ.
Adjusts the size and
position of the picture.
7 H. SIZE
Adjusts the horizontal screen size.
• –20 O 00 O +20 (*)
–: Reduces the screen size horizontally.
+: Enlarges the screen size horizontally.
*You can adjust this item with in the range between 00
and +20 during the under-scan mode.
7 H. POSITION
Adjusts the horizontal screen position.
• –20 O 00 O +20
–: Moves the screen to the left.
+: Moves the screen to the right.
7 V. SIZE
Adjusts the vertical screen size.
• –20 O 00 O +20
–: Reduces the screen size vertically.
+: Enlarges the screen size vertically.
7 V. POSITION
Adjusts the vertical screen position.
• –10 O 00 O +10
–: Moves the screen down.
+: Moves the screen up.
EN04_LCT1993-001A-f.p65 06.1.5, 18:2415