ENGLISH TU-DB1SFR DIGITAL TERRESTRIAL SET TOP BOX INSTRUCTIONS Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996) Number: 4022
CONTENTS SAFETY PRECAUTIONS ................................................ 2 IN THE BOX .................................................................... 3 RECEIVER BUTTONS .................................................... 4 REMOTE CONTROL BUTTONS ................................... 5 REMOTE CONTROL BUTTONS ................................... 6 PREPARATION ................................................................ 7 PREPARATION ................................................................
SAFETY PRECAUTIONS POWER Always use the provided AC adapter. Operate only from the power source specified AC 100-240 V,50/60Hz (6V DC , 1.5A) on the AC adapter. In using, the AC adapter get heat on the surface of the case. It is normal, not defective. Do not be covered with any material on case of AC adapter while it is in operation. Leave the 15 cm space(minimum) around the AC adapter. The rating information and safety caution of the AC adapter are on its case.
IN THE BOX Thank you for buying this JVC Degital Terrestrial Set Top Box.
RECEIVER BUTTONS Front: Standby button Program down/up buttons Back: RS-232C RS 232 ANTENNA OUT ANTENNA OUT ANTENNA IN ANTENNA IN TV TV SCART -4- VCR/DVR VCR SCART DIGITAL AUDIO OUT (CO AXIA L) SPDIF DIGITAL AUDIO OUT DC IN (6V) POWER SUPPLY
REMOTE CONTROL BUTTONS Mute Standby Slide Switch Number buttons Information button AV button Colour buttons TV/DTV button MENU button Up/Down/ Right/Left buttons OK button BACK button Text button Programme Up/Down buttons ( [P+] [P-] buttons) Volume Up/Down buttons WIDE button GUIDE button PAGE UP/DOWN buttons SUBTITLE button VCR/DVD control buttons -5-
REMOTE CONTROL BUTTONS To operate this STB: Set the Slide Switch to STB position. For details of the use of each buttons, see each section’s explanation. Note: Volume-/+ buttons and the Mute button work for the volume from the TV. To operate a JVC brand TV or VCR: Set the Slide Switch to the TV/VCR position. Pressing a button that looks the same as the device’s original remote control button has the same effect as the original remote control.
PREPARATION Connections Place your receiver on a firm, level surface with at least a 10cm gap around all sides of the case and in a position convenient for connection to your television, a mains power outlet and a TV aerial wall outlet (or the 'flying lead' from your TV aerial, as appropriate). Please refer to the Safety Precautions on page 2.
PREPARATION Switching on Turn on your TV set and select the SCART input (with the AV key, or similar, on the television remote control). Press the [STANDBY] key on the remote control handset. The power lamp change to green and the receiver's menu will be seen on the TV screen. If you do not see the receiver's menu on the television screen, press the AV button on your TV remote control until you see the First Time Installation menu.
If no digital terrestrial television broadcasts are found the receiver will display a message: CHANGING CHANNELS You can choose the channel by using the P / buttons or the number buttons. W hen us i ng t he number butt ons, enter the programme number as follows. Example: PR6 You should then refer to the Troubleshooting Guide on page 20 to establish the cause of the problem. PR123 press 6, PR12 press 12 , press 1,2 and 3.
Icons are also displayed in the information banner and if this channel is a favourite channel (see ADVANCED OPERATION - Favourite Channels on page 15). favorite channel icon If the selected channel is locked (see - ADVANCED OPERATION - Channel Protection on page 14), you must enter the correct four digit code to view the channel. Here, you can preview any channel stored by the receiver before viewing it full screen.
You can change the day by pressing [YELLOW] or [BLUE] keys. Pressing [BLUE] will display events of the next day. Pressing [YELLOW] will display the events of the previous day. You can return to normal television viewing (to watch the channel last selected in the EPG screen) by pressing the [GUIDE] key again, or the [MENU] key.
TV / DTV Key AUDIO LANGUAGE If there is no connected VCR device, The TV/DTV key is used to switch TV and DIGITAL TV modes. When the set-top box is in TV mode, the TV scart is not switched and the TV operates in analog mode. Digital terrestrial television channels can broadcast simultaneous soundtracks in more than one language. This function selects which language soundtrack you will hear when switching to a channel broadcasting with multiple soundtracks.
FAVOURITE MODE Use [LEFT] or [RIGHT]buttons to toggle Favourite Mode. You can enable / disable the Favourite Mode by means of these keys. Enter PIN CODE:use [UP] or [DOWN] buttons to go to Enter PIN code option. Use OK button to enter new password. New Password Menu is displayed. Use NUMBER buttons to enter new password. New Password is asked twice for confirmation. ANTENNA POWER PARENTAL SETTINGS Use [UP] or [DOW N] buttons to go to Parental Settings option.
SELECT This function selects a channel for viewing and is an alternative to using the [P+] and [P-] keys, channel number or EPG. Highlight the channel to be viewed using the [LEFT] or [RIGHT] keys and press [OK]. The highlighted channel now appears in the image window and you can leave the Channel List to view the channel by pressing [MENU].
Hint The PIN is factory set to 0000. This code should be reset (as describ ed b elow) to anot her sequence of numbers, known only to you, when you have finished setting up the receiver. You can now leave the Channel List screen and return to normal TV viewing by pressing [MENU]. Any attempt to change channel to the locked channel will now display the same window requesting the PIN code and the channel will only be displayed on entry of the correct code.
Press the [GUIDE] key to display the EPG screen and press [RIGHT] to display the next programme details in the text window and highlight the name of the next programme in the list of channels. Press [OK] when a programme you want to watch is highlighted and the reminder icon is displayed against that programme's name. You can exit the EPG screen in the normal way pressing [GUIDE], [MENU].
INSTALLATION Although your receiver will not lose its settings or stored channels when switched off, you may wish to re-install the receiver because you have moved t o a di ff er ent ar ea w it h di ff er ent br oadc as t frequencies, you wish to reinstate a channel previously deleted from the channel list, or you want t o watch new channel s w hi ch have s t ar ted broadcasting.
SPECIFICATION GENERAL Broad casting system DVB-T 2k & 8k Video system PAL Number of preset channels 200 Channel frequencies 47 - 858 MHz Stereo system MPEG Layer I & II 32/44.1/48kHz Power requirements DC 6V, AC adapter: 100 - 240V, 50/60 Hz Terminals U/V Input PAL type U/V Output PAL type SCART-1 (TV) RGB, Y/C, Video output and Audio output are available. SCART-2 (Aux) RGB, Y/C, Video output, Audio output and Video input are available.
CONNECTING THE EXTERNAL DEVICES If your TV and VCR both have two scart sockets you can connect as follows.Unplug the aerial lead and connect this to the ANT IN socket on the rear of your receiver. Connect the aerial lead (supplied) from the LT OUT on the receiver to the ANT IN on the rear of the VCR. Then connect an aerial lead from the LT OUT on the VCR to the ANT IN socket on the rear of your TV. If your VCR has only one scart socket, connect only Scart 1 to VCR.
TROUBLESHOOTING GUIDE If you experience problems with the receiver or its installation, in the first instance please read carefully the relevant sections of this User Guide and this Troubleshooting section.
Information for Users on Disposal of Old Equipment ENGLISH [European Union] This symbol indicates that the electrical and electronic equipment should not be disposed as general household waste at its end-of-life. Instead, the product should be handed over to the applicable collection point for the recycling of electrical and electronic equipment for proper treatment, recovery and recycling in accordance with your national legislation.
