English UX-G28[J].BOOK Page 1 Monday, November 12, 2007 10:49 AM MICRO COMPONENT SYSTEM UX-G28 —Consists of CA-UXG28 and SP-UXG28 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
Safety.FM Page 1 Monday, November 19, 2007 4:06 PM Warnings, Cautions and Others Mises en garde, précautions et indications diverses Class II equipment symbol This symbol indicates that the unit has a double insulation system This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Safety.FM Page 2 Tuesday, November 27, 2007 11:46 AM Some of the model information is located on the bottom. WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. Sur certains modèles, l’information les concernant est située à la partie inférieure. AVERTISSEMENT: POUR DIMINUER LE RISQUE D'UN INCENDIE OU D'UNE SECOUSSE ELECTRIQUE, NE PAS EXPOSER CET APPAREIL A LA PLUIE OU A DE L'HUMIDITE.
Safety.FM Page 3 Tuesday, November 27, 2007 11:46 AM IMPORTANT FOR LASER PRODUCTS 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover or cabinet. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: (For U.S.A.) Visible and/or invisible class II laser radiation when open. Do not stare into beam. (For Canada) Visible and/or invisible class 1M laser radiation when open. Do not view directly with optical instruments. 4.
UX-G28[J].BOOK Page 4 Monday, November 12, 2007 10:49 AM CAUTION ATTENTION • • • • • Do not block the ventilation openings or holes. (If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.) Do not place any naked flame sources, such as lighted candles, on the apparatus. When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.
UX-G28[J].BOOK Page 1 Monday, November 12, 2007 10:49 AM Contents Contents ..............................................................1 Introduction ........................................................2 Precautions ......................................................................... 2 How to Read This Manual ................................................. 3 Getting Started ...................................................4 Step 1: Unpack ....................................................
UX-G28[J].BOOK Page 2 Monday, November 12, 2007 10:49 AM Introduction Thank you for purchasing a JVC product. Please read all instructions carefully before operation, to ensure your complete understanding and to obtain the best possible performance from the unit. Precautions Installation • Install in a place which is level, dry and neither too hot nor too cold—between 5°C and 35°C. • Install the System in a location with adequate ventilation to prevent internal heat buildup inside the System.
UX-G28[J].BOOK Page 3 Monday, November 12, 2007 10:49 AM How to Read This Manual To make this manual as simple and easy-to-understand as possible, we have adapted the following methods: • Button and control operations are explained as listed in the table below. In this manual, the operations using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.
UX-G28[J].BOOK Page 4 Monday, November 12, 2007 10:49 AM Getting Started Step 1: Unpack Step 1:Unpack the package and check the accessories. After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately.
UX-G28[J].BOOK Page 5 Monday, November 12, 2007 10:49 AM Step 3: Hook Up If you need more detailed information, see page 6 Illustrations of the input/output terminals below are typical examples. When you connect Digital Audio Player, etc., refer also to their manuals since the terminal names actually printed on the rear may vary. Turn the power off to all components before connections. FM antenna (supplied) Extend it so that you can obtain the best reception.
UX-G28[J].BOOK Page 6 Monday, November 12, 2007 10:49 AM To connect the AM loop antenna To connect the speaker cords Make sure to connect the wire correctly. Make sure the both speakers are connected correctly and firmly. 1 Hold 3 Release 1 Unlock 3 Lock 2 Insert 2 Insert For better FM/AM reception When connecting the speaker cords, match the polarity of the speaker terminals: The black cord to (-), the red cord to (+).
UX-G28[J].BOOK Page 7 Monday, November 12, 2007 10:49 AM Before Operating the System The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 2 3 4 5 6 7 8 9 REPEAT1 GROUP RANDOM PROG.
UX-G28[J].BOOK Page 8 Monday, November 12, 2007 10:49 AM Daily Operations—Playback 1 Turn on the power. 1 The STANDBY lamp on the main unit turns off. 2 Select the source. Playback automatically starts if the selected source is ready to start. • If you press AUX, start playback source on the external component. Numeric buttons DISPLAY/ PROGRAM 4/1/ Á/¢ PRESET 2 3 Adjust the volume. 4 Operate the target source as explained later.
UX-G28[J].BOOK Page 9 Monday, November 12, 2007 10:49 AM Listening to the Radio To preset the stations To select the band (FM or AM) 1 2 FM/AM/AUX FM You can preset 20 FM and 10 AM stations. FM MONO AM Tune in to a station you want to preset. Activate the preset number entry mode. DISPLAY/ PROGRAM AUX PROG. kHz You can also carry out the same operation using the FM/ AM/AUX on the System. To tune in to a station While FM or AM is selected...
UX-G28[J].BOOK Page 10 Monday, November 12, 2007 10:49 AM Playing Back from the USB mass storage class device Playable media and files This system can playback following types of media and files. Media File format Audio CD, CD-R/RW, USB mass storage class device MP3, WMA Audio CD CD-R CD-RW This System is equipped with a USB MEMORY terminal on the front panel. You can connect a USB mass storage class device such as a USB flash memory device, Digital Audio Player (DAP) to this System.
UX-G28[J].BOOK Page 11 Monday, November 12, 2007 10:49 AM To select a track/group Playing Back Other Equipment To select a track: Increases the track numbers. Decreases the track numbers. To connect other equipment By using a stereo mini plug cord (not supplied), you can connect equipment with analog audio output jacks such as a Digital Audio Player, or a TV, etc. Stereo mini plug cord (not supplied) To select a group (MP3/WMA disc, USB device only): Increases the group numbers.
UX-G28[J].BOOK Page 12 Monday, November 12, 2007 10:49 AM Daily Operations—Sound & Other Adjustments Adjusting the Volume Remote control You can adjust the volume level from level 0 (VOL MIN) to level 31 (VOL MAX). Remote control: Main unit: CLOCK/ SLEEP VOLUME Remote ONLY To drop the volume in a moment FADE MUTING 4/¢ To restore the volume, press again, or adjust the volume level.
UX-G28[J].BOOK Page 13 Monday, November 12, 2007 10:49 AM Setting the Clock Turning Off the Power Automatically Without setting the built-in clock, you cannot use the Daily Timer (see page 17). To turn off the System after a certain period of time—Sleep Timer 1 1 Turn off (standby) Activate the sleep timer mode. 2 sec. CLOCK/ SLEEP 2 Activate the clock setting mode. 5 sec. CLOCK/ SLEEP REPEAT1 GROUP TRACK WMA 2 Specify the time (in minutes).
UX-G28[J].BOOK Page 14 Monday, November 12, 2007 10:49 AM Advanced Disc/USB mass strage class device Operations Programming the Playing Order— Remote control Program Play You can arrange the playing order of the tracks (up to 32) before you start playback. • You can repeat one programmed track or all the programmed tracks by pressing REPEAT. 1 Numeric buttons CD 6 4/¢ TUNING/ GROUP Before starting playback, press DISPLAY/ PROGRAM. For CD DISPLAY/ PROGRAM DISPLAY/ PROGRAM USB MEMORY 6 STOP 7 PROG.
UX-G28[J].BOOK Page 15 Monday, November 12, 2007 10:49 AM To check the programmed contents Then select a track. While the PROG. indicator is shown on the display and before playback... PROG. MP3 CD DISPLAY/ PROGRAM Track number DISPLAY/ PROGRAM To modify the program Next program step will be indicated when you program tracks. For CD While the PROG. indicator is shown on the display and before playback...
UX-G28[J].BOOK Page 16 Monday, November 12, 2007 10:49 AM Playing at Random—Random Play Remote ONLY You can play back all the tracks on the disc, USB mass storage class device at random. You can play back all the tracks on the disc at random. 1 Playing Repeatedly—Repeat Play You can repeat playback. For CD: REPEAT Press RANDOM. Remote ONLY REPEAT1 REPEAT Canceled RANDOM (No indication) For MP3/WMA disc, USB mass storage class device (DAP): 2 REPEAT Start play back.
UX-G28[J].BOOK Page 17 Monday, November 12, 2007 10:49 AM Timer Operations Setting the Timer Remote control Using Timer, you can wake up with music, etc. • You can set the Timer when the System turns on. • To exit from the timer setting, press 7 as required. TIMER How Timer actually works Once the Timer has been set, the timer ( ) indicator lights on the display. Lights TIMER lamp on the main unit. Timer is activated at the same time everyday until the timer is turned off manually.
UX-G28[J].BOOK Page 18 Monday, November 12, 2007 10:49 AM 3 To inactivate the TIMER. Set Off Time 1 Set Off Time setting. When the System turns on. TIMER TIMER 2 Set time. See the step 2 1, 2 You can not set On time and Off time on the same time setting. 4 Select the playback source. 1 Select the source. The timer ( ) indicator on the display and the TIMER lamp of the main unit go out. • When setting both SLEEP TIMER and DAILY TIMER, the timer which turns the unit off earlier takes precedence.
UX-G28[J].BOOK Page 19 Monday, November 12, 2007 10:49 AM Additional Information Daily Operations—Sound & Other Adjustments Learning More about This System Daily Operations—Playback (see pages 8) Listening to the Radio: • If you store a new station into an occupied preset number, the previously stored station in that number will be erased. • When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the stations again.
UX-G28[J].BOOK Page 20 Monday, November 12, 2007 10:49 AM Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Timer Operations: Daily Timer does not work. ] The System has been turned on when the on-time comes. Timer starts working only when the System is turned off. ] There might have been a power failure. Set the clock first, then the timer again. Adjustments or settings are suddenly canceled before you finish.
UX-G28[J].BOOK Page 21 Monday, November 12, 2007 10:49 AM Specifications Amplifier section Output Power: Speakers/Impedance: 8 W per channel, min. RMS, driven into 4 Ω at 1 kHz with no more than 10% total harmonic distortion. 4Ω–8Ω Terminals AUX IN Input sensitivity/Impedance (250mV/50kΩ) USB Ver.2.0 (Full Speed) Compatible device: Mass Storage Class Compatible File System: FAT16, FAT32 Bus Power supply: Max 5V/500mA Tuner section FM tuning range: 87.5 MHz – 108.
UX-G28[J].BOOK Page 22 Monday, November 12, 2007 10:49 AM Parts Index Refer to the pages to see how to use the buttons and controls.
UX-G28[J].
UX-G28[J].BOOK Page 24 Monday, November 12, 2007 10:49 AM TO OUR VALUED CUSTOMER THANK YOU FOR PURCHASING THIS JVC PRODUCT. WE WANT TO HELP YOU ACHIEVE A PERFECT EXPERIENCE. NEED HELP ON HOW TO HOOK UP? NEED ASSISTANCE ON HOW TO OPERATE? NEED TO LOCATE A JVC SERVICE CENTER? LIKE TO PURCHASE ACCESSORIES? IS HERE TO HELP! TOLL FREE: 1(800)252-5722 http://www.jvc.com Remember to retain your Bill of Sale for Warranty Service.
UX-G28[J].BOOK Page 25 Monday, November 12, 2007 10:49 AM LIMITED WARRANTY 1-1 USA ONLY ONLY FOR PRODUCT PURCHASED IN U.S.A. JVC Americas Corp. (JVC) warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original purchase for the period shown below.
UX-G28[J].
UX-G28[J].
