English COVERC.FM Page 1 Monday, April 24, 2006 7:48 PM MICRO COMPONENT SYSTEM UX-G50 —Consists of CA-UXG50 and SP-UXG50 INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
SAFTYJ.FM Page 1 Thursday, February 9, 2006 3:58 PM Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
SAFTYJ.FM Page 2 Thursday, February 9, 2006 3:58 PM For the main unit: Note to CATV system installer: Declaration of Conformity This reminder is provided to call the CATV system installer’s attention to section 820-40 of the NEC which provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.
SAFTYJ.FM Page 3 Thursday, February 9, 2006 3:58 PM IMPORTANT FOR LASER PRODUCTS / IMPORTANT POUR PRODUITS LASER 1. CLASS 1 LASER PRODUCT 2. CAUTION: Do not open the top cover. There are no user serviceable parts inside the unit; leave all servicing to qualified service personnel. 3. CAUTION: VISIBLE AND / OR INVISIBLE CLASS 1M LASER RADIATION WHEN OPEN. DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS. 4. REPRODUCTION OF LABEL: CAUTION LABEL, PLACED INSIDE THE UNIT. 1.
UX-G50[J].BOOK Page 1 Thursday, February 9, 2006 4:11 PM Contents Introduction .....................................................2 Precautions ......................................................................2 How to Read This Manual ..............................................3 Getting Started ................................................4 Step 1: Unpack ................................................................4 Step 2: Prepare the Remote Control ...............................
UX-G50[J].BOOK Page 2 Thursday, February 9, 2006 4:11 PM Introduction Thank you for purchasing the JVC Micro Component System. We hope it will be a valued addition to your home, giving you years of enjoyment. Be sure to read this instruction manual carefully before operating your new stereo system. In it you will find all the information you need to set up and use the system. If you have a query that is not answered by the manual, please contact your dealer.
UX-G50[J].BOOK Page 3 Thursday, February 9, 2006 4:11 PM How to Read This Manual To make this manual as simple and easy-to-understand as possible, we have adapted the following methods: • Button and control operations are explained as listed in the table below. In this manual, the operations using the remote control is mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks.
UX-G50[J].BOOK Page 4 Thursday, February 9, 2006 4:11 PM Getting Started Step 1:Unpack the package and check the accessories. Step 1: Unpack After unpacking, check to be sure that you have all the following items. The number in parentheses indicates the quantity of each piece supplied. • FM antenna (1) • AM loop antenna (1) • Remote control (1) • Batteries (2) If any item is missing, consult your dealer immediately.
UX-G50[J].BOOK Page 5 Thursday, February 9, 2006 4:11 PM Step 3: Hook Up If you need more detailed information, see page 7. For more detailed information on connecting external equipment, see pages 13 and 14. Illustrations of the input/output terminals below are typical examples. When you connect other components, refer also to their manuals since the terminal names actually printed on the rear may vary. Turn the power off to all components before connections.
UX-G50[J].BOOK Page 6 Thursday, February 9, 2006 4:11 PM FM antenna (supplied) Extend it so that you can obtain the best reception. AM loop antenna (supplied) Turn it until the best reception is obtained.
UX-G50[J].BOOK Page 7 Thursday, February 9, 2006 4:11 PM To assemble and connect the AM loop antenna To assemble the AM loop antenna To connect the AM loop antenna Make sure to connect the wire correctly. 1 Hold 2 Insert 3 Release • If the AM loop antenna wire or speaker cords are covered with vinyl, remove the vinyl to expose the tip of the antenna by twisting the vinyl. • Make sure the antenna conductors do not touch any other terminals, connecting cords and power cord.
UX-G50[J].BOOK Page 8 Thursday, February 9, 2006 4:11 PM Before Operating the System The indications on the display teach you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display.
UX-G50[J].BOOK Page 9 Thursday, February 9, 2006 4:11 PM Daily Operations—Playback 1 Turn on the power. 1 Numeric buttons SET/ RESUME MP3 MODE PRESET UP, PRESET DOWN 4/1, 7,¡/¢ 2 Disc selection buttons QP LINK FM MODE DIMMER 3 The STANDBY lamp on the main unit turns off. • Without pressing STANDBY/ON , the System turns on by pressing one of the source selecting buttons in the next step. 2 Select the source. Playback automatically starts if the selected source is ready to start.
UX-G50[J].BOOK Page 10 Thursday, February 9, 2006 4:11 PM Listening to the Radio To preset the stations To select the band (FM or AM) You can preset 30 FM and 15 AM stations. FM Remote ONLY 1 Tune in to a station you want to preset. 2 Activate the preset number entry mode. AM SET/RESUME To tune in to a station While FM or AM is selected... Remote control: Main unit: 3 1 sec. 1 sec. DOWN UP Frequency starts changing on the display.
UX-G50[J].BOOK Page 11 Thursday, February 9, 2006 4:11 PM To tune in to a preset station Remote ONLY 1 Select a band (FM or AM). FM AM 2 Select a preset number for the station you store. 1 2 3 4 5 6 7 8 9 0 10 To select a disc to be played back CD 1 CD 2 CD 4 CD 5 To start: CD 3 To pause: To release, press again. To select a track/group* Increases the track/group* numbers.
UX-G50[J].BOOK Page 12 Thursday, February 9, 2006 4:11 PM Resume Play for Audio CD/MP3 For MP3 playback If you press 7 during playback, the position of the track where you stopped playback will be memorized by the unit. By pressing CD 6, you can start playback again from the point where you stoppped it. According to the MP3 playback mode, 4/1 / ¡/¢ or number buttons work for the group selection or the track selection.
UX-G50[J].BOOK Page 13 Sunday, April 23, 2006 7:42 PM To play back sounds on the PC Playing Back from the PC This System is equipped with a USB terminal on the front panel of the main unit. You can connect your PC to this terminal and enjoy sound reproduced through your PC. When you connect your PC for the first time, follow the procedure below. • Remember you cannot send any signal or data to your PC from this System. Press USB, then start playback from PC.
Basic.fm Page 14 Thursday, February 9, 2006 9:10 PM Remote ONLY Playing Back from other equipment Quick Portable Link (QP Link) To connect other equipment If you connect other equipment such as a digital audio player to the AUX terminal and play it back, the source automatically changes to AUX. By using an stereo mini plug cord (not supplied), you can connect equipment with analog audio output jacks such as a Digital Audio Player, or a TV, etc.
UX-G50[J].BOOK Page 15 Thursday, February 9, 2006 4:11 PM Daily Operations—Sound & Other Adjustments Adjusting the Volume Remote control You can adjust the volume level from level 0 (VOL-MIN) to level 31 (VOL-MAX). Remote control: Main unit: VOLUME SET/RESUME CLOCK/ TIMER 4/1, 7,¡/¢ CANCEL DISPLAY PRESET UP, PRESET DOWN VOLUME To drop the volume in a moment Remote ONLY To restore the volume, press again, or adjust the volume level. FADE MUTING DIMMER A.
UX-G50[J].BOOK Page 16 Thursday, February 9, 2006 4:11 PM Changing the Display Brightness —DIMMER Remote ONLY You can dim the display window. DIMMER DIM ON DIM OFF (Canceled) Setting the Clock Remote ONLY Without setting the built-in clock, you cannot use the Daily Timer (see page 21). • To exit from the clock setting, press CLOCK/TIMER as required. • To go back to the previous step, press CANCEL. 1 Activate the clock setting mode.
UX-G50[J].BOOK Page 17 Thursday, February 9, 2006 4:11 PM Turning Off the Power Automatically Remote ONLY To turn off the System after playback is over— Auto Standby This function works only when the source is CD. A.STANDBY A.STBY Canceled (No indication) When Auto Standby is in use, the A.STBY indicator lights on the display. When the disc playback stops, the A.STBY indicator starts flashing.
UX-G50[J].BOOK Page 18 Thursday, February 9, 2006 4:11 PM Advanced Disc Operations Programming the Playing Order— Remote control Remote ONLY Program Play You can arrange the playing order of the tracks (up to 32) before you start playback. • You cannot enjoy MP3 discs for program play. • You can repeat all the programmed tracks by pressing REPEAT. Numeric buttons CANCEL 1 Before starting playback, press PROGRAM.
UX-G50[J].BOOK Page 19 Thursday, February 9, 2006 4:11 PM To check the programmed contents While the PRGM indicator is shown on the display and before playback... In the programmed order. In the reverse order. Playing at Random—Random Play Remote ONLY You can play back all the tracks on the selected disc at random. • You can repeat the current disc by pressing REPEAT. 1 2 Select a disc by pressing CD 1 – CD 5. Press RANDOM.
UX-G50[J].BOOK Page 20 Thursday, February 9, 2006 4:11 PM Remote ONLY Playing Repeatedly—Repeat Play You can repeat playback. Main Unit ONLY You can lock the disc trays so that no one can eject the loaded discs. • This is possible while the System is on standby. For CD/MP3 (TRACK mode): REPEAT Prohibiting Disc Ejection—Child Lock 1 CD Canceled While the disc trays are closed...
UX-G50[J].BOOK Page 21 Thursday, February 9, 2006 4:11 PM Timer Operations Setting the Timer Remote control STANDBY/ON CLOCK/ TIMER SET/RESUME CANCEL Remote ONLY Using Daily Timer, you can wake up with music, etc. • You can store three Daily Timer settings; however, you can activate only one of Daily Timers at the same time. • To exit from the timer setting, press CLOCK/TIMER as required. • To correct a misentry during the process, press CANCEL. You can return to the previous step.
UX-G50[J].BOOK Page 22 Thursday, February 9, 2006 4:11 PM 2 Make the timer setting as you want. 1 Set the hour then the minute for on-time. PRESET UP To turn off the Timer after its setting is done Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days. SET/RESUME 1 Select the Timer you want to cancel. PRESET DOWN CLOCK /TIMER 2 Set the hour then the minute for off-time in the same manner.
UX-G50[J].BOOK Page 23 Thursday, February 9, 2006 4:11 PM Additional Information Learning More about This System Daily Operations—Sound & Other Adjustments Daily Operations—Playback (see pages 9 to 14) Adjusting the Volume: Listening to the Radio: • If you store a new station into an occupied preset number, the previously stored station in that number will be erased. • When you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days.
UX-G50[J].BOOK Page 24 Sunday, April 23, 2006 7:42 PM Troubleshooting If you are having a problem with your System, check this list for a possible solution before calling for service. General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat the procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in.
UX-G50[J].BOOK Page 25 Thursday, February 9, 2006 4:11 PM Specifications Parts Index Amplifier section Refer to the pages to see how to use the buttons and controls. Output Power: 120 W per channel, min. RMS, driven into 6 Ω at 1 kHz with no more than 10% total harmonic distortion. Speakers Impedance: 6 Ω – 16 Ω Audio Input AUX Input sensitivity/Impedance: LEVEL1: 150 mV/47 kΩ LEVEL2: 500 mV/47 kΩ USB: USB Ver. 1.1 Remote control Tuner section 87.5 MHz – 108.
UX-G50[J].
WARRANTY.
WARRANTY.
COVERC.
