Cover[J].fm Page 1 Friday, March 17, 2006 10:36 AM MICRO COMPONENT SYSTEM UX-G70 —Consists of CA-UXG70 and SP-UXG70 SUPER VIDEO INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located either on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No. Serial No.
Safty[J].fm Page 1 Friday, March 17, 2006 10:36 AM Warnings, Cautions and Others Mises en garde, précautions et indications diverses For U.S.A. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
UX-G70[J].book Page 1 Monday, April 3, 2006 4:46 PM Introduction Precautions Contents Installation Connections ..............................................................3 Display Indicators....................................................6 Daily Operations—Playback ..................................7 Daily Operations—Sound & Other Adjustments .....12 • Install the System in a location with adequate ventilation to prevent internal heat buildup in the System.
UX-G70[J].book Page 2 Monday, April 3, 2006 4:46 PM Playable Disc Types COMPACT DIGITAL VIDEO SUPER VIDEO DIGITAL AUDIO • CD-R/-RW: Recorded in the Audio CD, Video CD and SVCD formats. MP3, WMA and JPEG files written in accordance with the “ISO 9660” format can also be played. • DVD-R/-RW, +R/+RW: Recorded in the DVD Video format. MP3, WMA and JPEG files written in the UDF bridge format can also be played. • DVD-RW/-ROM: Recorded in the DVD Video Recording (VR) format.
UX-G70[J].book Page 3 Monday, April 3, 2006 4:46 PM Connections Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT directly to the video input of your TV. Connecting VIDEO OUT to a TV via a VCR may interfere with your viewing when playing back a copyprotected disc. Connecting VIDEO OUT to an integrated TV/VCR system may also interfere with your viewing. Supplied accessories Check to be sure that you have all the following items.
UX-G70[J].book Page 4 Monday, April 3, 2006 4:46 PM ~ Powered subwoofer For better AM/FM reception AM loop antenna (supplied) From the powered subwoofer (not supplied) Keep it connected. SUB WOOFER OUT The subwoofer connected can reproduce the bass sounds recorded in front left and right channels, but cannot reproduce the LFE signals in DVD multi-channel discs. • Before plugging the unit to the main supply, make sure that the powered subwoofer is turned off.
UX-G70[J].book Page 5 Monday, April 3, 2006 4:46 PM ⁄ Digital audio component When connecting a portable audio device (LINE) Portable audio device (Digital Audio Player, etc.) Protective cap At the front panel • Set “DIGITAL AUDIO OUTPUT” in the “AUDIO” menu correctly according to the connected digital audio equipment (see page 31). If the setting is incorrect, loud noise may be generated causing damage to the speakers.
UX-G70[J].book Page 6 Monday, April 3, 2006 4:46 PM Display Indicators The indications on the display tell you a lot of things while you are operating the System. Before operating the System, be familiar with when and how the indicator illuminates on the display. 1 2 3 4 5 67 8 9 p MP3 WMA MONO ST TA NEWS INFO A.STBY REC 1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP GROUP RANDOM PRGM 3D PHONIC PRGR. B.S.P. BONUS REC 1 2 3 q w e 1 Disc tray indicators • 1–5: Disc tray number indicators.
UX-G70[J].book Page 7 Monday, April 3, 2006 4:46 PM Daily Operations—Playback Remote control Disc tray selecting buttons 1 Number buttons ENTER/SET TOP MENU/PG RETURN MENU/PL , , , 2 8 7 GROUP/TITLE SKIP 4,¢ FM/PLAY MODE 1,¡ QP LINK SHIFT 3 In this manual, operations using the remote control are mainly explained; however, you can use the buttons and controls on the main unit if they have the same (or similar) name and marks. 1 Turn on the power. The STANDBY lamp on the main unit goes off.
UX-G70[J].book Page 8 Monday, April 3, 2006 4:46 PM Listening to the Radio 3 Select a preset number for the station you store. INFO To select the band (FM or AM) DISC 2 DISC 3 1 2 3 DISC 4 Main unit: Remote control: DISC 1 4 SCAN MODE 7 DISC 5 A.STANDBY 5 6 VFP SLEEP 8 LINE OUT LEVEL ANGLE 10 To tune in to a station 10 • You can also use the ¡ or 1 button. While FM or AM is selected... Remote control: 0 9 ZOOM Examples: To select preset number 5, press 5.
UX-G70[J].book Page 9 Monday, April 3, 2006 4:46 PM Playing Back a Disc On-screen guide icons INFO Before operating a disc, be familiar how a disc is recorded. • DVD Video/DVD-VR comprises of “Titles” which includes “Chapters,” DVD Audio/MP3/WMA/JPEG comprises of “Groups” which includes “Tracks,” JPEG comprises of “Groups” which includes “Files,” and CD/ SVCD/VCD comprises of only “Tracks.” • For playback of MP3/WMA/JPEG, see also page 26.
UX-G70[J].book Page 10 Monday, April 3, 2006 4:46 PM Remote ONLY To locate a particular portion While playing a disc... – SLOW + x2 x5 x10 x20 x60 x2 x5 x10 x20 x60 • Search speed changes as illustrated above except for MP3/ WMA discs. For MP3/WMA discs, search speed and the indications on the TV are different. • No sound comes out if searching is carried out while showing the moving picture. To return to normal playback, press DVD/CD 3.
UX-G70[J].book Page 11 Monday, April 3, 2006 4:46 PM • While listening to another source... Changes the source to LINE automatically. (If you change from LINE to another source, QP link will be canceled.) • While the System is on standby... Turns on the System and activates the LINE source automatically (except when the display is turned off). MP3 WMA MONO ST TA NEWS INFO A.STBY REC 1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP GROUP RANDOM PRGM 3D PHONIC PRGR. B.S.P.
UX-G70[J].book Page 12 Monday, April 3, 2006 4:46 PM Daily Operations—Sound & Other Adjustments Remote control To drop the volume in a moment A.STANDBY VFP Remote ONLY To restore the volume, press again, or adjust the volume level. FADE MUTING SLEEP DIMMER SCAN MODE LINE OUT LEVEL DISPLAY , , , ENTER/SET Adjusting the Sound INFO To reinforce the heavy sound This boosts the low and high frequency sound—Sound Turbo II.
UX-G70[J].book Page 13 Monday, April 3, 2006 4:46 PM Creating 3-dimentional Sound Field Remote ONLY —3D Phonic Adjusting the Audio Input Level Remote ONLY If the sound from the component connected to the LINE IN jack is too loud or is too quiet when changing from another source to LINE, you can change the audio input level through the LINE IN jack (without changing the volume level). While playing a disc... 3D PHONIC AUDIO/MPX 2 sec. ENTER/SET L.IN LVL1 (while holding...) L.
UX-G70[J].book Page 14 Monday, April 3, 2006 4:46 PM Remote ONLY Changing the Display Brightness Changing the Picture Tone You can dim the display window. • While showing a playback picture on the TV, you can select a preset picture tone, or adjust it and store your own taste. TV/VIDEO DIMMER DIMMER OFF (Canceled) DIMMER ON To select a preset picture tone AUTO DIM 1 While playing, display VFP setting screen. DIMMER ON Dims the display.
UX-G70[J].book Page 15 Monday, April 3, 2006 4:46 PM 3 Adjust the parameter. Turning Off the Power Automatically TV CH ENTER/SET Remote ONLY Auto Standby TV CH A.STANDBY 4 Repeat steps 2 to 3 to adjust other parameters. To remove the screen, press VFP again while holding SHIFT, or wait for more than 5 seconds. Remote ONLY Setting the Clock INFO Without setting the built-in clock, you cannot use Daily Timers (see page 28) and Sleep Timer.
UX-G70[J].book Page 16 Monday, April 3, 2006 4:46 PM Unique DVD/VCD Operations , , INFO For DVD Video: While playing back a chapter containing audio languages, you can select the language to listen to. For DVD Audio: While playing back a track containing audio channels, you can select the audio channel to listen to. For DVD-VR and SVCD/VCD: When playing back a track, you can select the audio channel to play. • You can also select the audio track using the on-screen bar (see page 22).
UX-G70[J].book Page 17 Monday, April 3, 2006 4:46 PM Remote ONLY Selecting the Subtitle Language For DVD Video: While playing back a chapter containing subtitles in different languages, you can select the subtitle language to display on the TV. For DVD-VR: While playing, you can turn the subtitles on or off. For SVCD: While playing, you can select the subtitles even if no subtitles are recorded on the disc. • You can also select the subtitle language using the onscreen bar (see page 22).
UX-G70[J].book Page 18 Monday, April 3, 2006 4:46 PM 2 Enter the key number. DISC 1 1 DISC 4 4 SCAN MODE 7 DISC 2 DISC 3 2 3 Slow-motion playback 1 While playing... ENTER/SET Still picture playback starts. DISC 5 A.STANDBY 5 6 VFP SLEEP 8 9 ANGLE 2 Select slow motion speed. 0 3 Follow the interactive instructions shown on the Forward slow motion starts. – SLOW + 1/32 screen.
UX-G70[J].book Page 19 Monday, April 3, 2006 4:46 PM Advanced Disc Operations Programming the Playing Order— Remote control Remote ONLY Program Play INFO You can arrange the playing order of the chapters or tracks (up to 99) before you start playback. • Program play cannot be used for DVD-VR/JPEG. • Resume does not work for Program Play. Number buttons 1 Before starting playback, activate Program Play.
UX-G70[J].book Page 20 Monday, April 3, 2006 4:46 PM 3 Start playback. DVD/CD Playing at Random—Random Play Playback starts in the order you have programmed. Remote ONLY You can play all chapters or tracks at random. • Random Play cannot be used for DVD-VR/JPEG and some DVDs. 1 Before starting playback, activate Random Play. To skip a step: To pause: To stop: GROUP/TITLE SKIP PAGE FM/PLAY MODE To release, press DVD/CD 3. PROGRAM RANDOM Canceled MP3 WMA MONO ST TA NEWS INFO A.
UX-G70[J].book Page 21 Monday, April 3, 2006 4:46 PM Remote ONLY Playing Repeatedly A-B Repeat INFO • You can also select the repeat mode using the on-screen bar (see pages 23 and 24). • For MP3/WMA/JPEG, see page 27. You can repeat playback of a desired portion by specifying the beginning (point A) and the ending (point B). • A-B Repeat cannot be used for MP3/WMA and for some DVDs. Repeat Play 1 While playing (without PBC for SVCD/VCD), select the start point (A). You can repeat playback.
UX-G70[J].book Page 22 Monday, April 3, 2006 4:46 PM On-screen Disc Operations Remote ONLY INFO You can check the disc information and use some functions through the on-screen bar. On-screen Bar Information 1 Disc type 2 Playback information On-screen bars DVD Video 1 2 3 Dolby D DVD-VIDEO 3/2.1ch TIME 1:25:58 0:00:58 CHAP233 TOTAL DISC 1TITLE TITLE 14 2CHAP TIME TIME CHAP. OFF OFF 1/3 1/3 1 2 DVD-AUDIO TIME LPCM DISC 1 2/0.
UX-G70[J].book Page 23 Monday, April 3, 2006 4:46 PM To operate using the On-screen Bar For detailed operations of the following functions, see also “To operate using the On-screen Bar” on the left. Ex.: Selecting a subtitle (French) for DVD Video While a disc is selected as the source... To change the time information 1 Display the entire on-screen bar. You can change the time information in the on-screen bar and the display window on the main unit.
UX-G70[J].book Page 24 Monday, April 3, 2006 4:46 PM 4 Select the repeat mode you want. A-B TITLE GROUP DISC ALL CHAPTER* TRACK* PG PL OFF Repeats a desired portion (see below). Repeats the current title. Repeats the current group. Repeats the current disc. Repeats all discs (except for DVD). Repeats the current chapter. Repeats the current track. Repeats the current title of original program (for DVD-VR only) (see also page 21). Repeats the current title of playlist (for DVD-VR only) (see also page 21).
UX-G70[J].book Page 25 Monday, April 3, 2006 4:46 PM 4 Enter the desired chapter/track number. DISC 1 DISC 2 DISC 3 1 2 3 DISC 4 4 SCAN MODE 7 Examples: To select chapter/track 5, press 5. To select chapter/track 10, press 1, then 0. To select chapter/track 15, press 1, then 5. To select chapter/track 30, press 3, then 0. DISC 5 A.
UX-G70[J].book Page 26 Monday, April 3, 2006 4:46 PM To move the highlight bar between group list and track list Operations on the Control Screen Remote ONLY INFO Moves the bar to the track list. You can search for and play the desired items through the control screen for MP3/WMA/JPEG discs. Moves the bar to the group list. Control screen for MP3/WMA/JPEG discs The control screen automatically appears on the TV screen when you load an MP3, WMA or JPEG disc. Ex.: When the MP3 disc is loaded.
UX-G70[J].book Page 27 Monday, April 3, 2006 4:46 PM To zoom in the JPEG files • You cannot zoom in the still picture during slide-show. • For other discs, see page 18. To select a group (for MP3/WMA/JPEG): GROUP/TITLE SKIP 1 While playing back a still picture... • During slide-show, press 8 to display the still picture, then... (while holding...) ZOOM To skip a track: To stop playback: 10 ZOOM 1 ZOOM 2 ZOOM OFF GROUP/TITLE SKIP (while holding...
UX-G70[J].book Page 28 Monday, April 3, 2006 4:46 PM Timer Operations Setting the Timer Remote control AUDIO CANCEL ENTER/SET Remote ONLY INFO Using Daily Timer, you can wake up with your favorite music. You can store three Daily Timer settings; however, you can activate only one of the timers at the same time. • To exit from the timer setting, press CLOCK/TIMER as required. • To correct a mis-entry during process, press CANCEL. You can go back to the previous step.
UX-G70[J].book Page 29 Monday, April 3, 2006 4:46 PM 1 Set the hour then the minute for on-time. 2 Set the hour then the minute for off-time. 3 Select the playback source—“TUNER-FM,” “TUNER-AM,” “DISC,” or “LINE IN.” MP3 WMA MONO ST TA NEWS INFO A.STBY REC 1DISC ALL A–B QP Link PG PL USB AHB PRO S.TURBO SLEEP GROUP RANDOM PRGM 3D PHONIC PRGR. B.S.P. BONUS REC 1 2 3 To turn on or off the Timer Since Daily Timer is activated at the same time everyday, you may need to cancel it on some particular days.
UX-G70[J].book Page 30 Monday, April 3, 2006 4:46 PM Setup Menu Operations Initial settings Remote Control INFO Remote ONLY The Setup Menu cannot be activated during playback. 1 Press SET UP. LANGUAGE , , , SET UP ENTER/SET MENU LANGUAGE ENGLISH AUDIO LANGUAGE ENGLISH SUBTITLE ENGLISH ON SCREEN LANGUAGE ENGLISH 2 3 4 5 Press (or )to select the menu. Press (or ) to select the item. Press ENTER/SET. Press (or ) to select the options, then press ENTER/SET.
UX-G70[J].book Page 31 Monday, April 3, 2006 4:46 PM AUDIO menu Item DIGITAL AUDIO OUTPUT DOWN MIX D.RANGE COMPRESSION Contents Set this item correctly when using the DVD OPTICAL DIGITAL OUT terminal on the rear. PCM ONLY: When connecting to audio equipment which can decode only linear PCM signals. DOLBY DIGITAL/PCM: When connecting to a Dolby Digital decoder or an amplifier with a builtin Dolby Digital decoder. STREAM/PCM: When connecting to a DTS decoder or an amplifier with a built-in DTS decoder.
UX-G70[J].book Page 32 Monday, April 3, 2006 4:46 PM Additional Information Learning More about This System Connections (see pages 3 to 5) • Make sure the antenna conductors do not touch any other terminals, connecting cords or the power cord. Also, keep the antennas away from metallic parts of the System, connecting cords, and the AC power cord. This could cause poor reception. • Use only speakers with the same speaker impedance as indicated by the speaker terminals on the rear of the System.
UX-G70[J].book Page 33 Monday, April 3, 2006 4:46 PM – This System can playback JPEG files with the extension code <.jpg> or <.jpeg> (regardless of the letter case— upper/lower). – This System may not playback JPEG files properly if they are recorded on a device other than a digital still camera. – During slide-show playback, zoom cannot be operated.
UX-G70[J].book Page 34 Monday, April 3, 2006 4:46 PM Timer Operations (see pages 28 and 29) Setting the Timer: • If you do not specify the preset station or track number correctly while setting a timer, the currently selected station or the first track will be played when the timer is activated. • When you unplug the AC power cord or if a power failure occurs, the timer will be canceled. You need to set the clock first, then the timer again.
UX-G70[J].book Page 35 Monday, April 3, 2006 4:46 PM Troubleshooting General: Adjustments or settings are suddenly canceled before you finish. ] There is a time limit. Repeat procedure again. Operations are disabled. ] The built-in microprocessor may malfunction due to external electrical interference. Unplug the AC power cord and then plug it back in. Unable to operate the System from the remote control. ] The path between the remote control and the remote sensor on the System is blocked.
UX-G70[J].
UX-G70[J].book Page 37 Monday, April 3, 2006 4:46 PM OPTICAL DIGITAL OUT Signals DIGITAL AUDIO OUTPUT Playback disc DVD Video with 48 kHz, 16/20/24 bit Linear PCM with 96 kHz, Linear PCM with Dolby Digital with DTS DVD Audio with 48/96/192 kHz, 16/20/24 bit Linear PCM with 44.1/88.2/176.
UX-G70[J].book Page 38 Monday, April 3, 2006 4:46 PM General Specifications Amplifier section—CA-UXG70 Output Power: 120 W per channel, min. RMS, driven into 6 Ω at 1kHz with no more than 10% total harmonic distortion. Audio Input LINE IN: 500 mV/49 kΩ (at “L.IN LVL1”) 250 mV/49 kΩ (at “L.IN LVL2”) 125 mV/49 kΩ (at “L.IN LVL3”) GAME IN: 500 mV/49 kΩ Audio Output LINE OUT: 1.0 Vrms (3 kΩ) (at “L.OUT LVL1”) 500 mVrms (1.5 kΩ) (at “L.OUT LVL2”) SUBWOOFER OUT: 260 mVrms/3.
UX-G70[J].book Page 39 Monday, April 3, 2006 4:46 PM Parts Index Remote control Button AUDIO TV 7 ¡,1 ¢,4 8 , , , , ENTER/SET C.VOICE (One-Touch Replay) Number buttons 3D PHONIC AHB PRO ANGLE AUDIO/MPX A.
warranty.
warranty.
Cover[J].
