User Manual

9
MARKER SETTING Menu Screen
Settings in bold are factory default settings.
Memo：
● The [MARKER SETTING] menu is valid for the image from this viewfinder’s [SDI INPUT] terminal. When [INPUT SOURCE] in
the [VIDEO FORMAT] menu is set to AVFB, all items in the [MARKER SETTING] menu appear as A----B and cannot be
selected. For the image from the camera’s viewfinder, set the [Marker Setting] menu on the camera by using the [MENU] dial to
control the menu of the camera (A Page 7).
Item Setting Value Description
ASPECT TYPE VIDEO
CINEMA
This item sets the purpose of the marker.
VIDEO : Aspect for TV broadcast shooting.
CINEMA : Aspect for cinema shooting.
Memo：
● When the input format is 4:3, ACINEMAB cannot be selected. ([VIDEO] is displayed.)
RATIO This item sets the aspect ratio of the marker. It displays the configured aspect ratio of the
marker. When set to A16:9+4:3B, the 16:9 and 4:3 marker are displayed at the same
time.
Memo：
● A16:9+4:3B is displayed when the VIDEO FORMAT at the camera is HD mode.
When ASPECT
TYPE is set to
AVIDEOB
16:9
4:3
14:9
16:9+4:3
When ASPECT
TYPE is set to
ACINEMAB
2.35:1
1:66:1
1:75:1
1:85:1
POSITION CENTER
C.HEADRM
This item sets the display position of the marker.
CENTER : Sets the display position of the marker at the center of the screen.
C.HEADRM : Sets the display position of the marker at the upper side of the screen.
Memo：
● AC.HEADRMB can only be set when [RATIO] is A2.35:1B or A1:85:1B. For other
settings, [CENTER] will be displayed and setting is disabled.
ASPECT MARKER OFF
ON
This item sets the marker outside the aspect area.
OFF : Cancels the marker outside the aspect area.
ON : Displays the marker outside the aspect area.
Memo：
● When camera output is set to BARS, this function is AOFFB during Return Video
display, 1:1 display and when status display is OFF.
TYPE LINE
HALFTONE
LINE+HALF
This item sets the type of labeling for markers outside the aspect area.
LINE : Displays the aspect area in lines.
HALFTONE : Displays the image level outside the aspect area in half the brightness.
LINE+HALF : Displays the aspect area in lines and sets outside the area in half the
brightness.
SAFETY ZONE OFF
ON
This item sets the marker inside the aspect area.
OFF : Cancels the marker inside the aspect area.
ON : Displays the marker inside the aspect area.
Memo：
● When camera output is set to BARS, this function is AOFFB during Return Video
display, 1:1 display and when status display is OFF.
SIZE 95 %,
93 %, 90 %
88 %, 80 %
This item sets the display percentage for markers inside the aspect area.
CENTER MARK OFF
ON
This item sets whether to display markers in the center.
OFF : Cancels the center marker.
ON : Displays the center marker.
Memo：
● When camera output is set to BARS, this function is AOFFB during Return Video
display, 1:1 display and when status display is OFF.
PAGE BACK ^ This returns to the [MAIN MENU] screen.
VF-HP790G_EN.book Page 9 Tuesday, March 26, 2013 4:06 PM