User Guide

ENGLISH
E-35
6.The top page of VN-C215V4U appears
7.The Basic page with the IP address settings appears
A confirmation screen appears. Press the [OK] button. The VN-C215V4U restarts using the new IP
address. It takes about 1 minute for the camera to reboot.
Memo :
● Access from this computer may fail when the IP address of VN-C215V4U is changed. To enable
access to VN-C215V4U from the same computer, alter the IP address at the computer accordingly.
Click on [Network], followed by [Basic]
on the next submenu.
B
A
C
Enter the values you wish to specify in
[IP Address], [Subnet Mask] and
[Default Gateway].
Click [OK].
Set the [IP Setting] item to [DHCP
Disable].
VN-C215_EN.book Page 35 Tuesday, March 20, 2007 1:54 PM