User's Manual

If A Storage Mode is set to "FTP Record", FTP Record options will be displayed.

* The [Set values] in bold letters are factory defaults.

A Storage Mode Selects a storage mode. Depending on the selected storage

mode, B options vary.

[Set values: OFF, FTP Record]

B FTP Server Sets an IP address of FTP server or FQDN.

C Path Sets a path name. If the [Path] is left blank, the FTP transfer is

made to the home directory of FTP server.

Memo:

● To make an FTP transfer to a directory locating under the

home directory:

Sets the directory name in the [Path] field.

Separate directories by delimiter A/B from each other.

Example: subdir1/subdir2

● If A/B is set at the beginning of directory name, the destination

directory of FTP transfer depends on the FTP server.

D User Name Enters a user name.

E Password Enters a password. When a user name is specified, A******B will

be displayed.

F FTP Record Mode Sets an FTP recording mode.

Depending on the selected FTP record mode, G options vary.

Constant : Transfers JPEG images to the FTP server at each

specified time.

Alarm : Transfers JPEG images around the time when the specified

conditions are met to the FTP server.

Constant+Alarm : Enables both Constant and Alarm.

[Set values: Constant, Alarm, Constant+Alarm]