COMPACT COMPONENT SYSTEM COMPACT DISC AUTOMATIC CHANGER XL-FZ158BK / XL-FZ258BK XL-FZ158BK XL-FZ158 COMPACT DISC AUTOMATIC CHANGER CALL MEMORY 1 2 RANDOM PLAY MODE REPEAT 4 5 DISC SKIP SEARCH STOP/CANCEL PLAY/PAUSE STANDBY DISC POWER / RECEIVED 3 OPEN/CLOSE PHONES LEVEL MIN MAX 5 PHONES EXCHANGE DISC PLAY & EXCHANGE SYSTEM 1 BIT P E M D D CONVERTER ' XL-FZ258BK CONTINUE PROGRAM DISC 1 RAMDOM 2 3 OPEN/ CLOSE DISC SKIP EXCHANGE 4 5 TRACK 1 2 3 5 6 7 9 10 REPEAT
Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture.
INTRODUCTION Precautions Load compact discs only Never insert anything other than compact discs into any part of the player. If a problem persists If something goes wrong, turn off the power immediately. If the same problem reoccurs when the power is turned on once more, turn off the power again and consult your JVC dealer. About this manual This manual covers the operating instructions for the compact disc automatic changers XL-FZ258BK and XL-FZ158BK.
INTRODUCTION Names of buttons Main unit POWER button MEMORY button RANDOM: random playback button CALL: displaying program contents button 1/¡, 4/¢ SEARCH: skip, fast forward/backward buttons 7 STOP/CANCEL button PLAY MODE: switching play mode (continue/program) button REPEAT button Display window 3 PLAY/8 PAUSE button DISC SKIP button COMPACT DISC AUTOMATIC CHANGER CALL MEMORY RANDOM PLAY MODE DISC SKIP REPEAT SEARCH STOP/CANCEL PLAY/PAUSE STANDBY DISC POWER 1 2 / RECEIVED 3 4 5
Remote control unit (for XL-FZ258BK) Remote control signal transmitter PROGRAM button RANDOM: random playback button CONTINUE PROGRAM RAMDOM POWER: POWER button Turns on the unit or put it in STANDBY mode POWER CONTINUE button DISC 3 OPEN/ CLOSE 1 2 4 5 TRACK 1 2 3 4 5 6 7 8 OPEN/CLOSE button DISC buttons DISC SKIP EXCHANGE EXCHANGE: changing discs button DISC SKIP button TRACK buttons CALL: displaying program contents button 9 10 REPEAT +10 CALL CANCEL REPEAT button CANCEL b
BEFORE USING FOR THE FIRST TIME Connecting to the Digital Output Jack Installing the unit Best location Select a location which is level, dry and neither too cold nor too hot (temperature range 5°C (41°F) to 35°C (95°F)). Also, avoid dusty locations or any location subject to vibration. If interference occurs If this unit is placed near a tuner or a radio receiver tuned to AM frequencies, interference may occur.
Supplying the power To connect the AC power cord of the main unit The AC power cord is supplied separately and must be connected to the unit. Plug the AC power cord into the AC POWER CORD inlet of this unit and connect to the wall outlet after all connections are complete. To install the batteries in the remote control unit (for XL-FZ258BK) Before operating the remote control unit, install two batteries. 1.
BEFORE USING FOR THE FIRST TIME COMPU LINK connection JVC’s COMPU LINK Remote Control System provides unified control over system components connected with COMPU LINK. Connecting JVC audio components with the COMPU LINK jacks automatically controls relative operations between components and facilitates various operations. With the COMPU LINK connection to an amplifier or receiver, you can operate XL-FZ258BK/XL-FZ158BK with the amplifier or receiver’s remote control unit.
BASIC OPERATIONS Basic functions for disc playback Turning on the power of this unit Press the POWER button to turn on this unit. The STANDBY indicator is turned off and the display is turned on. Main unit Remote control unit POWER POWER Press again to turn off the power and activate the standby mode. The STANDBY indicator is lit. The power is automatically turned on also by; ÷ Pressing the 0 OPEN/CLOSE button.
BASIC OPERATIONS Locating a point to start playback Specifying a desired disc Skipping to a desired disc Use the DISC buttons (1-5). Use the DISC SKIP button. Main unit Remote control unit Remote control unit Main unit DISC SKIP DISC SKIP DISC 2 1 3 4 DISC 1 2 4 5 5 3 Each time the DISC SKIP button is pressed, the selected disc number switches from 1 to 5, then back to 1. To select a disc, press the desired disc number (1-5).
VARIOUS PLAYBACK PATTERNS BASIC OPERATIONS Playing tracks in a order of track/disc number Changing discs during playback During playback of a disc, you can change other discs in the disc tray without stopping playback. You can continuously play all the loaded discs, starting from any track on any disc. Press the EXCHANGE button. The disc tray opens and you can change the discs inside.
VARIOUS PLAYBACK PATTERNS Playing tracks in a desired order You can play only the favorite tracks in any desired order. PLAY MODE 3 PLAY/ 8 PAUSE STOP/CANCEL ÷ ÷ You can skip to a desired program step with the 4/¢ button. If you have programmed all disc (1~5) as “AL”,pressing ¢ (or 4) will skip to the next (or previous) disc. When the DISC SKIP button is pressed during program play, the playback skips to the next programmed disc.
Playing tracks in a random order Playing repeatedly You can select and play tracks in random order from all the discs loaded in the unit. Selections are made so that each track is played only once. RANDOM You can repeatedly play all discs or one track. It is also possible to utilize this function in combination with random/program playback function.
GENERAL INFORMATIONS COMPU LINK remote control system The COMPU LINK Remote Control System controls relative operations between components automatically and facilitates various operations. This is a system originated and developed by JVC for facilitating various system operations.
GENERAL INFORMATIONS Care and handling How to handle CDs Maintenance of discs When handling compact discs, do not touch the surface of the disc (reflective silver side — the side without the label). Since compact discs are made of plastic, they are easily damaged. If the disc gets dirty, dusty, scratched or warped, the sound will not be picked up correctly and, in addition, such discs may cause the CD player to malfunction.
GENERAL INFORMATIONS Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. Symptom Possible cause The unit is not operative. Remedy Power plug is disconnected from the AC outlet. Connect the plug to the AC outlet. Discs are not loaded. Load discs in the disc tray. Disc is inserted upside down. Load the disc with its label-side up in the disc tray. Disc is not loaded in the correct position.
We would like to thank you for purchasing one of our JVC products. Before connecting this unit to the wall outlet, please read the instructions carefully to ensure that you obtain the best possible performance. If you have any questions, please consult your JVC dealer. Table of contents INTRODUCTION ................................................ 1 Precautions ................................................................. 1 About this manual .......................................................
QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE : 1-800-537-5722 http://www.jvcservice.com Dear customer: In order to receive the most satisfaction from your purchase, read the instruction booklet before operating the unit. In the event that repair is necessary, or for the address nearest your location, please refer to the factory service center list below or within the Continental United States, Call 1-800-537-5722 for your authorized servicer.
LIMITED WARRANTY AUDIO-1 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIAL AND WORKMANSHIP from the date of original retail purchase for the period as shown below. (“The Warranty Period.”) PARTS LABOR 1YR 1YR THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY(50) UNITED STATES, THE DISTRICT OF COLUMBIA AND IN COMMONWEALTH OF PUERTO RICO.
VICTOR COMPANY OF JAPAN, LIMITED EN V J C 0199AOMOKGJEM