COMPACT DISC RECORDER ENREGISTREUR DE DISQUES LASER XL-R910SL OP E N / C LOS E 0 1 2 3 4 5 6 7 8 9 0 R EC P AUS E R EC R EC S OU R C E R AN DOM R E P E AT DIS P LAY P LAY P AUS E P R OGR AM S ET C OM P AC T DIS C R EC OR DER CLEAR X L -R 9 1 0 S TOP R EC LEVEL R EP EAT AUTO TR ACK FIN ALIZE R EC P AUS E R AN DOM DIS P LAY R EC S OUR CE DIGITAL ER AS E S YN CH R O R EC P OW ER _ON / Ñ OFF M IN M AX R M -S X LR 9 1 0 A R E M OTE C ON TR OL INSTRUCTIONS MANUAL DÕINSTRU
Warnings, Cautions and Others CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
For Canada/pour le Canada CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQUAU FOND For U.S.A. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
English Table of Contents Before Operating the Unit ............................ 2 Before Installation ...................................................................... 2 About Discs and Their Logos ..................................................... 2 Location of the Buttons and Controls ............ 3 Getting Started ........................................... 5 Checking the Supplied Accessories ........................................... 5 Putting Batteries in the Remote Control ................
Thank you for purchasing this JVC product. Please read these instructions thoroughly and carefully before starting operation to ensure that you will derive the optimum performance and a long service life from your unit. Before Installation About Discs and Their Logos Recording This unit has been designed to record on the discs bearing the following logos: General Precautions CD Recordable • DO NOT insert any metal object into the unit. • DO NOT disassemble the unit or remove screws, covers, or cabinet.
English Location of the Buttons and Controls Be familiar with the buttons and controls on your unit.
Front Panel 1 PROGRAM button (9) 2 4 / 1 (Reverse Skip/Reverse Search) buttons (8 – 10) ¢ / ¡ (Forward Skip/Forward Search) buttons (8 – 10) 3 CLEAR button (9, 10, 14) 4 SET button (13, 14) 5 AUTO TRACK button (11) 6 Disc tray 7 0 (Open/Close) button (7, 12) 8 3 (Play) button (7, 9) 9 8 (Pause) button (8) p 7 (Stop) button (7, 9, 10, 12, 13) q POWER button (7, 12) w RANDOM button (10) e REPEAT button (8) r DISPLAY button (8) t Remote sensor y Display window u FINALIZE button (14) i REC SOURCE button (12, 13
English Getting Started Checking the Supplied Accessories Connecting the Unit Check to be sure you have all of the following supplied accessories. The number in the parentheses indicates the quantity of the pieces supplied. You need to connect this unit to an amplifier/receiver and some playback components such as CD player, Compact Component System. • • • • The illustration on the next page indicates a typical connection with a CD player and an amplifier.
English Turn the power off to all components before connections. To a wall outlet ANALOG IN OUT OPTICAL COAXIAL OUT L L R R IN OUT XL-R910SL Disconnect the protective plug(s) before inserting the optical cord(s). LINE OUT OPTICAL L R OUT A L R OUT -AUX- IN L L R R TUNER CD B L L R R L CD Player C COAXIAL OPTICAL IN IN R OUT-TAPE-IN Illustrations of the input/output terminals above are typical examples.
English Playing Back a Disc This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote control if they have the similar names (or marks) as those on the front panel. If operations using the remote control are different from those using the front panel, they are then explained.
English To check the remaining time Basic Playback Operations During play or pause, press DISPLAY. • Each time you press DISPLAY, the following information appear on the display in sequence. While playing a CD, you can do the following operations. To stop play for a moment DISPLAY Press 8. While pausing, the 8 (Pause) indicator lights up on the display. To resume playback, press 3.
English Selecting Playback Modes 4/1 ¢/¡ PROGRAM PROGRAM SET COMPACT DISC RECORDER CLEAR 3 0 7 XL-R910 POWER _ON/ —OFF REPEAT REC LEVEL AUTO TRACK FINALIZE REC PAUSE DISPLAY REC SOURCE DIGITAL ERASE SYNCHRO REC POWER POWER = _ ON _ON/ —OFF RANDOM MIN RANDOM Programming the Playing Order of the Tracks — Program Play You can arrange the order in which tracks play before you start playing. You can program up to 30 tracks.
While confirming, you can change the track numbers in the program. Example: To change the track number (from “18” to “6”) programed in program step 4 1 Press PROGRAM repeatedly until the contents of program step 4 appears on the display. Playing at Random — Random Play The tracks will play at random. 1 2 Press ¢ / ¡ (or 4 / 1) to select a new track number, then press PROGRAM again. Load a disc.
English Recording on a CD-R/CD-RW Before You Start Recording • This unit has been designed to record on the following discs — both blank and unfinalized CD Recordable (CD-R) and CD Rewritable (CD-RW). • It should be noted that it may be unlawful to re-record pre-recorded tapes, records, or discs without the consent of the owner of copyright in the sound or video recording, broadcast or cable programme and in any literary, dramatic, musical, or artistic embodied therein.
English This manual mainly explains operations using the buttons and controls on the front panel. You can also use the buttons on the remote control if they have the similar names (or marks) as those on the front panel.
English Other Recording Functions REC PAUSE FINALIZE SET PROGRAM SET COMPACT DISC RECORDER CLEAR 7 XL-R910 POWER _ON/ —OFF REPEAT REC LEVEL AUTO TRACK FINALIZE REC PAUSE DISPLAY REC SOURCE DIGITAL ERASE SYNCHRO REC POWER POWER = _ ON _ON/ —OFF RANDOM MIN REC SOURCE Remote NOT Synchronized Digital Recording 4 Load a recordable disc and prepare the playback source. • See page 12 for details.
Remote NOT Erasing the Tracks on a CD-RW Finalization is the final process in recording on a CD-R or CD-RW. “Finalizing a disc” means to finish writing the TOC (Table of Contents) on the recorded disc. Only after this process is completed, a recorded CD-R or CD-RW can be played back on a CD player compatible with CD-R/CD-RW. You can erase a track or all the tracks on a CD-RW. • One-track erasure: You can erase the last track. • Disc erasure: You can erase all the tracks at once.
English Additional Information OPC (Optimum Power Control) Glossary Finalization This is the final process in recording on a CD-R or CD-RW. “Finalizing a disc” means to finish writing the TOC (Table of Contents) on the recorded disc. Only after this process is completed, a recorded CD-R or CD-RW can be played back on a CD player compatible with CD-R/CD-RW. Sampling Frequency When analog signals are converted into digital signals, they are divided into many points and digitized.
Handling Discs English Maintenance Moisture condensation How to handle discs When removing a disc from its case, press down the center holder of the case and lift the disc out, holding it by the edges. • Always hold the disc by the edges. Do not touch its recording surface. When storing a disc into its case, gently insert the disc around the center holder (with the printed surface facing up). • Make sure to store discs into the cases after use.
English Troubleshooting If you are having a problem with your unit, check this list for a possible solution before calling for service. If you cannot solve the problem from the hints given here, or the unit has been physically damaged, call a qualified person, such as your dealer, for service. Symptom Action Cause Playback No sound is heard. Unrecorded CD-R or CD-RW has been loaded. Load a recorded disc. Playback does not start. • Disc has been loaded upside down.
English Specifications CDR section System: Compact disc digital audio recording system Sampling frequency: 44.1 kHz Signal-to-noise ratio: 90 dB Dynamic range: 90 dB Frequency response: 20 Hz to 20 kHz Wow and flutter: Less than measurable limit Total harmonic distortion: 0.01% Input: ANALOG IN: Minimum input level: 300 mV (Full scale –12 dB)/47 kΩ OPTICAL IN: Input level: –23 dBm to –15 dBm (with sampling rate 32 kHz, 44.
VICTOR COMPANY OF JAPAN, LIMITED V EN, FR XL-R910[C]_COVER_f J 2 01.3.