Manual

Initial settings
PROGRESSIVE MODE
You can select the
progressive mode from the
following options.
_E,U_.GUAGE¢_D I
AUBIO LANGUAGE (_) I
suB_E 4_D I
ONSCREENLANGUAGE _ I
Mo.rrOR_PE _ I
AUTO
The unit recognizes the picture type (film or video
source) of the current disc according to the disc
information.
• VIDEO 1
Suitable for playing back a video source disc with
static (inactive) pictures.
• VIDEO 2
Suitable for playing back a video source disc with
dynamic (active) pictures.
• FILM
Suitable for playing back a film or progressive source
disc.
• SMART
Used to playback a disc containing both video and
film source materials.
Normally, set the PROGRESSIVE MODE to "AUTO"
Some DVD VIDEO discs may not be played back
correctly with the "AUTO" mode. If the playback
picture is unclear or noisy with a particular DVD
VIDEO disc, try to change the mode.
NOTE
• When playing back a film-source DVD VIDEO disc with
the "PROGRESSIVE MODE" set to "FILM'_ "SMART" or
"AUTO" and the progressive scan mode is active, the
PROGRESSIVE indicator on the front panel lights in
green. (See page 17.)
The "PREFERENCE 2" display handles preferences
related to audio and system.
DIGITAL AUDIO OUTPUT
To connect the unit's digital
output to an external device
equipped with a digital
input, this item must be set
correctly.
DIGITAL AUDIO OUTPUT
_DOWN MIX
SCREEN SAVER '_D I
AVCOMPUU_MO__D I
PCM ONLY
Should be selected when you connect the DIGITAL
OUT jack of the unit to the linear PCM digital input of
other audio equipment.
STREAM/PCM
Should be selected when you connect with the digital
input of an amplifier with a built-in DTS, Dolby Digital,
or MPEG multichannel decoder.
DOLBY DIGITAL/PCM
Should be selected when you connect to the digital
input of a Dolby Digital decoder, or an amplifier with a
built-in Dolby Digital decoder.
The following chart shows the relationship between
types of playback discs and output signals.
Playback discs
Output
STREAM/
DOLBY
DIGITAL/ PCM ONLY
PCM
PCM
DVD with 48/44.1 48/44.1 kHz,
kHz, 16 bit linear 16 bit, stereo *- *-
PCM linear PCM
DVD with 48/44.1 48/44.1 kHz,
kHz, 20/24 bit 16 bit, stereo *- *-
linear PCM linear PCM*
DVD with 96/88.2 No output
4-- 4-
kHz, linear PCM
DVD with DTS DTS bitstream 48 kHz,16 bit,
stereo linear *-
PCM*
DVD with Dolby Dolby Digital 48 kHz, 16 bit,
Digital bitstream *- stereo linear
PCM*
Video CD 44.1 kHz,
16 bit, stereo *- *-
linear PCM
Audio CD 44.1 kHz,16
bit,
4-- 4-
stereo linear
PCM
Audio CDwith DTS DTS bitstream 44.1 kHz,
16 bit, stereo *-
linear PCM
CD-Rwith MP3 No output *- *-
* With some DVD VIDEO discs that are not fully copy-
protected, a 20 or 24 bit digital signal may be output.
NOTES
• The unit does not provide the DTS decodingfunction.
• When playing a DVD VIDEO or Audio CD discwith DTS,
usea DTS decoder to get correctsignalsfrom your
speakers.
51