S600(J).
S600(J).book Page 2 Tuesday, June 4, 2002 10:43 AM Warnings, Cautions and Others Mises en garde, précautions et indications diverses CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
S600(J).book Page 1 Tuesday, June 4, 2002 10:43 AM English Table of Contents Introduction To repeat a desired part [A-B repeat playback] ...................38 Page 2 Changing the language, sound and scene angle.......... 39 Supplied accessories..........................................................2 Notes on handling ..............................................................3 To select the subtitle language [SUB TITLE] .......................39 To change the audio language or sound [AUDIO] ....
S600(J).
S600(J).book Page 3 Tuesday, June 4, 2002 10:43 AM Introduction English Notes on handling Important cautions Safety precautions Installation of the unit • Select a place which is level, dry and neither too hot nor too cold (between 5oC and 35oC, 41oF and 95oF). • Leave sufficient distance between the unit and the TV. • Do not use the unit in a place subject to vibrations. Avoid moisture, water and dust Do not place the unit in moist or dusty places.
S600(J).book Page 4 Tuesday, June 4, 2002 10:43 AM Introduction About discs Playable disc types Audio formats Playable disc types are as follows: There are some audio formats recorded on discs as shown below. DVD AUDIO DVD VIDEO VIDEO AUDIO Introduction SVCD Video CD Audio CD The DVD Logo is a trademark.
S600(J).book Page 5 Tuesday, June 4, 2002 10:43 AM Introduction English Disc structure Press RETURN. Press RETURN. Press RETURN. (For DVD AUDIO) Moving picture Menu screen 1 2 3 4 Moving picture Still picture 2 1 2 4 Group 2 Introduction Still picture 4 Group 1 Moving picture 1 4 A DVD AUDIO disc is comprised of “groups,” and each group is comprised of “tracks.” Some DVD AUDIO discs also contain a “bonus group” that can be played back by entering the “key number” (a kind of password).
S600(J).book Page 6 Tuesday, June 4, 2002 10:43 AM Getting started Connections *Before using the unit, you have to connect the unit to a TV and/or amplifier. Before making any connections • Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy-protected disc.
S600(J).book Page 7 Tuesday, June 4, 2002 10:43 AM Getting started Connection to a TV equipped with component jacks English You can enjoy high picture quality by connecting the unit’s COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables.
S600(J).book Page 8 Tuesday, June 4, 2002 10:43 AM Getting started To make the Progressive scanning mode selection active The unit supports the Progressive scanning system as well as the conventional Interlaced scanning system. If your television or monitor supports the progressive video input, you can enjoy a high quality picture by making the Progressive scanning mode active.
S600(J).book Page 9 Tuesday, June 4, 2002 10:43 AM Getting started English To connect to a stereo audio amplifier/receiver You can enjoy high-quality audio by connecting the unit’s audio output to your amplifier or receiver. Connect the unit’s AUDIO OUT (FRONT LEFT/FRONT RIGHT) jacks to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver.
S600(J).book Page 10 Tuesday, June 4, 2002 10:43 AM Getting started To connect to a digital audio device You can enhance the sound quality by connecting either of the unit’s DIGITAL OUT jacks to the digital input of an amplifier, etc. by using an optical or a coaxial digital cable (optional). The digital audio signal from a disc is directly transferred.
S600(J).book Page 11 Tuesday, June 4, 2002 10:43 AM Getting started To connect the power cord English Getting started When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the unit’s AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The STANDBY/ON indicator lights in red. Note that the shape of the smaller plug of the AC power cord is not perfectly symmetrical as illustrated below.
S600(J).book Page 12 Tuesday, June 4, 2002 10:43 AM Getting started Using the remote control unit Using the remote control unit, you can operate not only all the functions of the unit but also basic functions of your TV and amplifier/receiver. To install batteries in the remote control unit The battery compartment is located on the back of the remote control unit.
S600(J).book Page 13 Tuesday, June 4, 2002 10:43 AM Getting started To use the remote control unit for TV operation You can operate your TV from the remote control unit. Setting the remote control signal for operating your TV TV OPEN/ CLOSE TV1 DVD STANDBY/ON DISC SELECT TV TV2 2 3 TV5 TV6 4 5 6 TV7 TV8 TV9 8 9 TV0 MUTING 0 PAGE TV/VIDEO CANCEL T ME NU VOL+ ENTER CH OIC E CH - E RE SC ON NEXT PREVIOUS CLEAR TV STANDBY/ON .
S600(J).book Page 14 Tuesday, June 4, 2002 10:43 AM Basic operations In the following description, we assume that the buttons on the remote control unit are mainly used, however, you may use the corresponding buttons on the front panel if available. NOTE TV Make sure that the TV - DVD switch on the remote control unit is set to “DVD” when using the 5/∞/ 2/3 and numeric buttons for controlling the unit.
S600(J).book Page 15 Tuesday, June 4, 2002 10:43 AM Basic operations English The initial setup before using the unit We recommend you to set the display language, TV monitor type, analog audio output and digital output before using the unit, depending on circumstances, by following the procedure below. See “Changing the initial settings” on and after page 60 for details about each setting item.
S600(J).book Page 16 Tuesday, June 4, 2002 10:43 AM Basic operations 7 Press ENTER. The pull-down menu of the “DIGITAL AUDIO OUTPUT” appears. DVD PLAYER SET UP DIGITAL AUDIO OUTPUT DOLBY DIGITAL/PCM PCM ONLY ANALOG OUT DOLBY PROLOGIC DOLBY DIGITAL/PCM D. RANGE COMPRESSION STREAM/PCM ON SELECT ENTER USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE. DIGITAL AUDIO OUTPUT selection 8 Use 5/∞ to select a desired digital output signal type.
S600(J).book Page 17 Tuesday, June 4, 2002 10:43 AM Basic operations English Basic playback This section describes basic operations for playback of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio CD discs. For MP3 and JPEG disc playback, see the separate chapter on and after pages 51 and 55.
S600(J).book Page 18 Tuesday, June 4, 2002 10:43 AM Basic operations 3 Place one or two discs in the disc tray(s). With the label side up E LOS N/C OPE 0 PLA Y 3 SKIP DISC P PAU STO 7 GE HAN EXC 4 SE 8 ¢ SKIP 7 DISC 5 6 DISC 5 DISC 4 DISC 3 DISC 2 DISC 1 DISC C 7 DIS Y& PLA Y/ON NDB STA Y/O IO AUD N NDB STA E SSIV GRE PRO DVD 4 /CD CD D/V R VC PE /SU EO D VID /DV DIO D AU DV R YE PLA - GE HAN EXC • To insert an 8-cm disc, place it in the inner recess.
S600(J).book Page 19 Tuesday, June 4, 2002 10:43 AM Basic operations English To start playback Available : Press 3. or By the former operation (pressing 3), the unit starts playback from the disc loaded for playback after closing the disc carousel (see page 17 for details about which disc is loaded for playback). By the latter operation (using DISC 1 to 7, or DISC SELECT + numeric buttons), the unit starts playback from the disc set in the specified tray.
S600(J).book Page 20 Tuesday, June 4, 2002 10:43 AM Basic operations NOTES • Once a disc tray whose status is known by the unit becomes accessible when the carousel opens, the corresponding indicator lights even if the disc is not set. • When the RESUME function is “ON” or “DISC RESUME” and the resume point is memorized, pressing 3 starts playback from that point instead of the beginning. See page 23.
S600(J).book Page 21 Tuesday, June 4, 2002 10:43 AM Basic operations English To move back the playback position while DVD VIDEO playback [One touch replay function] Available : During playback of a DVD VIDEO disc, you can move back the playback position 10 seconds from the current position. ¶ During DVD VIDEO playback Press 3. The playback position moves back 10 seconds before the current position. Note that this function works only in the same title, though it works between chapters.
S600(J).book Page 22 Tuesday, June 4, 2002 10:43 AM Basic operations Resuming playback The unit can memorizes the position on a disc where you interrupt playback, and resume playback from that position later. There are two resume modes (DISC RESUME and ON) you can set on the preference display. See page 67 for details about how to set the resume mode. • When purchasing the unit, the resume mode is initially set to “ON”.
S600(J).book Page 23 Tuesday, June 4, 2002 10:43 AM Basic operations English To resume playback Available : When the resume mode is set to “DISC RESUME” ¶ While stopped, or no disc is inserted 1 Press 0 OPEN/CLOSE to insert a disc whose interrupted position is memorized. After loading the disc, the display window on the front panel shows “---RESUME” (DVD AUDIO/DVD VIDEO) or “--RESUME” (SVCD/Video CD) and “RESUME STOP” appear at the bottom of the opening display.
S600(J).book Page 24 Tuesday, June 4, 2002 10:43 AM Basic operations To locate the beginning of the scene or song You can locate the desired group or track (for DVD AUDIO), title or chapter (for DVD VIDEO), or track (for SVCD/Video CD/ Audio CD) from which the unit starts playback.
S600(J).book Page 25 Tuesday, June 4, 2002 10:43 AM Basic operations English To locate a desired selection using the numeric buttons Available : . ¶ For DVD AUDIO/DVD VIDEO/Audio CD: For SVCD/Video CD: During playback or while stopped During playback without PBC function or while stopped Use the numeric buttons to specify the number.
S600(J).book Page 26 Tuesday, June 4, 2002 10:43 AM Basic operations Variable speed playback T You can play back slowly or fast, or advance a picture frame by frame.
S600(J).book Page 27 Tuesday, June 4, 2002 10:43 AM Basic operations English Other convenient functions You can check the playback status, as well as change the brightness of the display window.
S600(J).book Page 28 Tuesday, June 4, 2002 10:43 AM Basic operations The indication on the right most of the status bar shows the unit’s transport status as follows: Icon Status Appears in the playback mode. Appears in the stop mode. Appears in the pause mode. Appears in the fast forward/backward playback mode. Appears in the slow-motion playback mode. Note that pressing ON SCREEN again brings up the menu bar under the status bar, from which you can access various functions.
S600(J).book Page 29 Tuesday, June 4, 2002 10:43 AM Advanced operations This chapter describes operations for various advanced functions of DVD AUDIO, DVD VIDEO, SVCD, Video CD and Audio CD discs. For MP3 and JPEG disc playback, see the separate chapters on and after pages 51 and 55. The following table shows the contents of this section together with effective disc types for each operation.
S600(J).book Page 30 Tuesday, June 4, 2002 10:43 AM Advanced operations Playing from a specific position on a disc You can play a disc from the selected track, title, group or chapter, or from the specified time. To locate a desired scene from the DVD menu Available : DVD AUDIO/DVD VIDEO discs generally have their own menus which show the disc contents. These menus contain various items such as titles of movies, names of songs, or artist information, and display them on the TV screen.
S600(J).book Page 31 Tuesday, June 4, 2002 10:43 AM Advanced operations 2 Use the numeric buttons to specify a title or item. group to be played. • To select a number between 1 and 10: Press the corresponding button for the number. • To select a number higher than 10: Use the +10 button. Examples: To select 13: +10 → 3 To select 34: +10 → +10 → +10 → 4 To select 40: +10 → +10 → +10 → 10 • To select a number between 1 and 10: Press the corresponding button for the number.
S600(J).book Page 32 Tuesday, June 4, 2002 10:43 AM Advanced operations 2 Use 2/3 to move to , then press ENTER. The pull-down menu for entering time appears under the . (Example for changing “2:35:__” to “2:34:__.”) (Screen example for DVD VIDEO) 8.5Mbps OFF DISC 1 TITLE 33 CHAP 33 CHAP.
S600(J).book Page 33 Tuesday, June 4, 2002 10:43 AM Advanced operations 1 Press DIGEST. Up to nine opening scenes are displayed. To select a still picture on a DVD AUDIO disc [PAGE] English Available : Most DVD AUDIO discs include still pictures, which usually appear in turn automatically during playback according to the playback sequence. However, there are other page(s) of the current still picture and you can change the picture (turn the page) manually.
S600(J).book Page 34 Tuesday, June 4, 2002 10:43 AM Advanced operations To play back a bonus group of a DVD AUDIO disc Available : Some DVD AUDIO discs contain a special group called “bonus group” whose contents are not opened to the public. The bonus group is always assigned to the last group of a disc (for example, if a disc contains four groups including a bonus group, “group 4” is the bonus group).
S600(J).book Page 35 Tuesday, June 4, 2002 10:43 AM Advanced operations Changing the playback order You can play tracks on a DVD AUDIO, SVCD, Video CD or Audio CD in the desired order or in random order. To play back in the desired order [Program playback] Available : By programming tracks, you can play up to 99 tracks in any order among multiple discs. You may program the same track more than once.
S600(J).book Page 36 Tuesday, June 4, 2002 10:43 AM Advanced operations With a DVD AUDIO/SVCD/Video CD disc, the program table is automatically dismissed when the program playback starts. With an Audio CD disc, the program table remains on the TV screen during program playback. However, pressing the ON SCREEN button brings up the status bar. When all of the programmed tracks have finished playback, the unit stops and the program table appears again. Note that the program remains.
S600(J).book Page 37 Tuesday, June 4, 2002 10:43 AM Advanced operations Repeat playback You can repeat playback of the current group or track (for DVD AUDIO), current title or chapter (for DVD VIDEO) or current or all tracks (for SVCD/Video CD/Audio CD). You can also repeat playback of a desired part. Icons in the display window To repeat the current selection or all tracks [Repeat playback] English Indications on the TV screen GROUP Repeats the current group for DVD AUDIO.
S600(J).book Page 38 Tuesday, June 4, 2002 10:43 AM Advanced operations • During DVD VIDEO playback To repeat a desired part [A-B repeat playback] 8.5Mbps DISC 1 TITLE 33 CHAP 33 CHAP.
S600(J).book Page 39 Tuesday, June 4, 2002 10:43 AM Advanced operations • Selecting “OFF” from the pull-down menu for repeat mode selection, or pressing 4/¢ quits the A-B repeat mode and continues playback. • You can also stop and quit the A-B repeat mode by pressing 7. NOTES • The A and B points must be set in the same title/ chapter/group/track. • To dismiss the menu bar: Press ON SCREEN.
S600(J).book Page 40 Tuesday, June 4, 2002 10:43 AM Advanced operations 2 Use SUB TITLE or 5/∞ to select the subtitle. Each time you press SUB TITLE or 5/∞, the subtitle language changes. See the following examples for subtitle selection. • For DVD AUDIO/DVD VIDEO Pressing SUB TITLE or 5/∞ cycles among the subtitles recorded on the disc.
S600(J).book Page 41 Tuesday, June 4, 2002 10:43 AM Advanced operations Example: To select a scene angle of DVD VIDEO [ANGLE] 1/3 ENGLISH 2/3 FRENCH Available : • For SVCD/Video CD Each time you press AUDIO-fs/Rate or 5/∞, the playback audio changes as follows. (for Video CD) ST1 ST (stereo) ST2 L L-1 R You can enjoy a variety of scene angles if the DVD VIDEO disc contains “multi-angle” parts, where multiple cameras were used to shoot the same scene from different angles.
S600(J).book Page 42 Tuesday, June 4, 2002 10:43 AM Advanced operations 3 Press ENTER. You can see the picture from the selected angle. The Angle selection window is dismissed. (Display window) ANGLE indicator LPCM VCDVD GROUP TITLE TRACK CHAP MPEG DOLBY PROGRAM DIGITAL RANDOM DTS 38 1 A-B ANGLE The ANGLE indicator appears during angleselected playback. Special picture playback and picture/sound effect You can see continuous still pictures or zoom in (or out) the picture.
S600(J).book Page 43 Tuesday, June 4, 2002 10:43 AM Advanced operations To zoom in/out pictures [ZOOM] To adjust the picture character [VFP] Available : T Available : OP NU CH ME + ME NU VOL- VOL+ ENTER CH OIC E CH - E RE SC ON NEXT PREVIOUS CLEAR SELECT 5/∞/2/3 N The VFP (Video Fine Processor) function allows you to adjust the picture character according to the type of programming, picture tone or personal preferences.
S600(J).book Page 44 Tuesday, June 4, 2002 10:43 AM Advanced operations 3 To define a user setting, select a parameter to be edited using 5/∞ from the following. • GAMMA Controls the brightness of a shaded portion without changing the brightness of the entire picture. This control is optimum when you adjust the pictures of software which generates subdued black in a bright room. The setting range is +4 to -4.
S600(J).book Page 45 Tuesday, June 4, 2002 10:43 AM Advanced operations 3 Press 5/∞ to adjust the effect level. You can select the effect level among “1” to “5.” The higher value enhances the effect. English Checking the sampling frequency and bit rate Available : You can check the sampling frequency and bit rate of digital audio during playback.
S600(J).book Page 46 Tuesday, June 4, 2002 10:43 AM Advanced operations Basic operation procedure Menu bar functions This section describes the functions you can perform via the menu bar. The available menu bar functions differ depending on the disc type.
S600(J).book Page 47 Tuesday, June 4, 2002 10:43 AM Advanced operations English Menu bar functions for DVD AUDIO OFF 2 1 DISC 1 TRACK 3 GROUP 3 TRACK 33 PROG. RND. 4 5 6 TOTAL 1:25:58 1/3 PAGE 32/32 7 8 Selected Icon 1 Time mode selection (During playback only) Selects the time mode shown in the display window on the front panel and in the status bar. 2 Repeat mode (During playback only) Select the repeat mode.
S600(J).book Page 48 Tuesday, June 4, 2002 10:43 AM Advanced operations Selected Icon Operation Note 1 Press ENTER to open the pull-down window. 2 Use 5/∞ to select a desired audio language or sound. Example: 7 Audio selection (During playback only) Selects the audio language or sound. 1/3 ENGLISH j 2/3 FRENCH j 3/3 SPANISH 3 Press ENTER to play back with the selected audio. (See page 40 for details about audio selection.) 8 1 Press ENTER to open the pull-down window.
S600(J).book Page 49 Tuesday, June 4, 2002 10:43 AM Advanced operations Selected Icon 5 Audio selection (During playback only) Selects the audio language or sound. Operation Note 1 Press ENTER to open the pull-down window. 2 Use 5/∞ to select a desired audio language or sound. Example: • For DVD VIDEO, the selected language may be abbreviated on the TV screen. See “Table of languages and their abbreviations” on page 62.
S600(J).book Page 50 Tuesday, June 4, 2002 10:43 AM Advanced operations Selected Icon 3 Time search (Except during SVCD/Video CD playback with PBC) Specifies the elapsed time from the beginning of the disc, from which the unit starts playback. 4 PROG. Program (While stopped only) Specifies the playback order of tracks. 5 RND. Random (While stopped only) Operation 1 Press ENTER to open the pull-down window. 2 Use numeric buttons to enter a desired time.
S600(J).book Page 51 Tuesday, June 4, 2002 10:43 AM MP3 disc playback The unit can play back MP3 files on a private CD-R/RW disc or commercial CD. We refer to a disc that contains MP3 file as an “MP3 disc” in this manual. Though available functions with MP3 discs are limited, operations for the available functions are similar to those with Audio CD discs.
S600(J).book Page 52 Tuesday, June 4, 2002 10:43 AM MP3 disc playback 2 Use 5/∞ to move the bar to a desired Group. NOTES • The current Group and Track numbers are shown on the display window in the following manner. LPCM VCDVD GROUP TITLE TRACK CHAP MPEG 3 8 DOLBY PROGRAM DIGITAL RANDOM DTS Current Group number 1 A-B 3 Use 4/¢ to select a desired Track, then Current Track number Current track elapsed time • You cannot advance or reverse playback of an MP3 disc rapidly.
S600(J).
S600(J).book Page 54 Tuesday, June 4, 2002 10:43 AM MP3 disc playback Checking the sampling frequency and bit rate Available : You can check the sampling frequency and bit rate of digital audio during playback.
S600(J).book Page 55 Tuesday, June 4, 2002 10:43 AM JPEG disc playback The unit can play back JPEG files on a private CD-R/RW disc. We refer to a disc that contains JPEG files as a “JPEG disc” in this manual. Note that, if a disc contains both of MP3 and JPEG files, you can only play back files of either type selected by the MP3/JPEG setting in the PICTURE preference display (See page 64).
S600(J).book Page 56 Tuesday, June 4, 2002 10:43 AM JPEG disc playback 3 Use 4/¢ to select a desired file. 4 Press ENTER. Basic operations The selected file (still picture) is shown on the TV. In the display window, you can see the current Group and file numbers. To see a desired picture Available : JPEG When loading a JPEG disc, after the disc contents are read, the JPEG CONTROL display automatically appears on the TV screen.
S600(J).book Page 57 Tuesday, June 4, 2002 10:43 AM JPEG disc playback English To zoom in/out the picture [ZOOM] Available : T RETURN OP PAGE TITLE/ GROUP NU CH ME + ME NU VOL+ ENTER CH - E RE SC ON NEXT PREVIOUS CLEAR SELECT N SLOW+ REPEAT SUB TITLE AUDIO ANGLE 3D PHONIC English You can see files (still pictures) one after another automatically in the slide show mode.
S600(J).book Page 58 Tuesday, June 4, 2002 10:43 AM JPEG disc playback Direct selection Selecting the start point of the slide show Available : TV OPEN/ CLOSE T 5/∞ “--” is shown in the Group display area of the display window. (Example for the indication of display window) DVD TV2 TV3 1 2 3 TV5 TV6 4 5 6 TV7 TV8 TV9 7 8 9 TV-/-- TV0 MUTING 10 0 +10 PAGE JPEG DVD TV TV4 RETURN 1 Press TITLE/GROUP.
S600(J).book Page 59 Tuesday, June 4, 2002 10:43 AM JPEG disc playback • To stop repeat playback Press 7. Note that the repeat mode remains. Repeat function English English Available : JPEG In the slide show mode, you can repeat playback of JPEG files in a Group or on the disc.
S600(J).book Page 60 Tuesday, June 4, 2002 10:43 AM Changing the initial settings NOTE TV • OTHERS Make sure that the TV - DVD switch on the remote control unit is set to “DVD” when using the 5/∞/2/3 and numeric buttons for controlling the unit. DVD OTHERS Selecting preferences This chapter refers to the settings which are already made when you purchase the unit.
S600(J).book Page 61 Tuesday, June 4, 2002 10:43 AM Changing the initial settings English NOTES • To dismiss a preference display: Press CHOICE. • While an MP3 or JPEG disc is loaded, you cannot bring up any preference display. • When a preference display is shown on a wide TV screen, the upper and lower parts of the TV picture sometimes may be cut off. In such a case, adjust the picture size control of the TV.
S600(J).
S600(J).book Page 63 Tuesday, June 4, 2002 10:43 AM Changing the initial settings English PICTURE page PICTURE MONITOR TYPE 4:3 LB PROGRESSIVE MODE AUTO SCREEN SAVER ON MP3/JPEG MP3 SELECT ENTER This page allows you to select desired options concerning with a picture or monitor screen. USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE.
S600(J).book Page 64 Tuesday, June 4, 2002 10:43 AM Changing the initial settings Menu items Setting options Notes/examples SCREEN SAVER • ON You can select the screen saver The current picture gets dark. function ON or OFF. See page 19 for details about screen • OFF The screen saver function is off. saver function. • The screen saver function does not work for still images during DVD AUDIO playback.
S600(J).book Page 65 Tuesday, June 4, 2002 10:43 AM Changing the initial settings Menu items ANALOG OUT To play back a DVD VIDEO disc recorded with surround multichannel audio correctly, this setting must be properly made according to your audio system. Setting options Notes/examples English • 2-CH DOLBY SURROUND • This function does not work when the 3D PHONIC function is activated Should be selected when you enjoy (see page 44).
S600(J).book Page 66 Tuesday, June 4, 2002 10:43 AM Changing the initial settings SPK.SETTING page This setting allows you to select desired options concerning with the speakers. SPK.SETTING MODE 5.1 CH. SIZE DELAY LEVEL SELECT ENTER USE 5∞ TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE. Menu items MODE You can select the speaker configuration type according to your speaker systems. Normally, set to “5.1 CH.” SIZE You can set the speaker sizes according to your speakers.
S600(J).book Page 67 Tuesday, June 4, 2002 10:43 AM Changing the initial settings English OTHERS page This page allows you to select desired options concerning with the system. OTHERS RESUME ON ON SCREEN GUIDE ON AUTO STANDBY OFF AV COMPULINK MODE DVD1 PARENTAL LOCK SELECT ENTER USE 5∞23 TO SELECT, USE ENTER TO CONFIRM TO EXET, PRESS CHOICE. Menu items Setting options Notes/examples • See page 23 for details about • ON RESUME resume playback function.
S600(J).book Page 68 Tuesday, June 4, 2002 10:43 AM Changing the initial settings Making fine tuning for your speakers You can make fine tuning to match your speaker system. This adjustment is available only when “ANALOG OUT” is set to “MULTI CHANNEL” in the “AUDIO” preference display and “MODE” is set to “EXPERT” in the “SPK. SETTING” preference display. You can set the speaker sizes according to your speakers.
S600(J).book Page 69 Tuesday, June 4, 2002 10:43 AM Changing the initial settings 1 Use 5/∞ to move to [DELAY] and press 1 Use 5/∞ to move to [LEVEL] and press ENTER. ENTER. The DELAY display page appears on the TV screen. points to [CENTER SPEAKER]. See page 60 for details about how to bring up the “SPK.SETTING” page. The LEVEL display page appears on the TV screen. points to [CENTER SPEAKER]. See page 60 for details about how to bring up the “SPK.SETTING” page.
S600(J).book Page 70 Tuesday, June 4, 2002 10:43 AM Changing the initial settings This function restricts playback of DVD VIDEO discs which contain violent (and other) scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes.
S600(J).book Page 71 Tuesday, June 4, 2002 10:43 AM Changing the initial settings 5 While points to [SET LEVEL], press ENTER to bring up the pull-down menu. In the pull-down menu, “NONE” and level “1” to “8” are available. “NONE” does not restrict playback. Level “1” is the strictest level. Discs rated higher than the selected level are restricted. Available : You can change the Parental Lock settings later.
S600(J).book Page 72 Tuesday, June 4, 2002 10:43 AM Changing the initial settings 3 Press ENTER to bring up the pull-down menu. The country code whose standards were applied to rate the DVD VIDEO disc should be selected. See “Appendix A: Country/Area code list for Parental Lock” on page 80. Note that if you change the country code, you must reselect the Parental Lock level. 4 Press ENTER. moves to [SET LEVEL]. 5 Press ENTER to bring up the pull-down menu.
S600(J).book Page 73 Tuesday, June 4, 2002 10:43 AM Additional information English Names of parts and controls Refer to the corresponding pages indicated in () for details.
S600(J).
S600(J).book Page 75 Tuesday, June 4, 2002 10:43 AM Additional information English AV COMPU LINK remote control system The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation.
S600(J).book Page 76 Tuesday, June 4, 2002 10:43 AM Additional information Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following list before requesting service. POWER Symptom Power does not come on. Possible cause Power plug is not inserted securely. Remedy Plug in securely. OPERATION Symptom The remote control unit does not work. Possible cause Remedy Too far from the unit. More closer to the unit.
S600(J).book Page 77 Tuesday, June 4, 2002 10:43 AM Additional information English PICTURE Symptom No picture is displayed on the monitor. Possible cause Remedy Connection of video cable is incorrect. Connect the cable correctly. Input selection of TV is incorrect. Select correctly. Disc is not playable. Use a playable disc (see page 4). No picture is displayed on the monitor or the screen is blurred or divided into two parts.
S600(J).book Page 78 Tuesday, June 4, 2002 10:43 AM Additional information Frequently Asked Questions Question Answer Ref. page You can play back the DVD VIDEO discs with the Region Code (local code) containing “ALL” or “1” recorded in the NTSC or PAL system (PAL disc signals are reproduced by converting to the NTSC system). You can also play back the Video CD discs recorded in the NTSC system. Please check the information on each disc jacket.
S600(J).book Page 79 Tuesday, June 4, 2002 10:43 AM Additional information English Specifications *Specifications and appearance subject to change without prior notice.
S600(J).book Page 80 Tuesday, June 4, 2002 10:43 AM Additional information Appendix A: Country/Area code list for Parental Lock This list is used for the Parental Lock operation. For details, see page 70.
S600(J).book Page 81 Tuesday, June 4, 2002 10:43 AM Additional information English Appendix B: Glossary Aspect ratio A ratio which defines the shape of the rectangular picture in a TV. It is the width of the picture relative to the height. The conventional TV picture is 4:3 in aspect ratio. Bitstream The digital form of multichannel audio data (e.g., 5.1channel) before it is decoded into its various channels. Channel, CH Stereo or multichannel audio consists of “channel” signals.
S600(J).book Page 82 Tuesday, June 4, 2002 10:43 AM Additional information Letter box A type of picture playback with the normal (4:3) TV screen. Black bars are shown at the top and bottom of the image to allow playing of wide-screen (16:9) DVD movie without cutting off any sides of the image on a 4:3 TV. Linear PCM audio Stands for “pulse code modulation.” Linear PCM is the usual digital method without compression, used for audio playback of DVD Video discs, Audio CD discs, etc.
S600(J).book Page 83 Tuesday, June 4, 2002 10:43 AM Additional information English Appendix C: Index 3D PHONIC ................................................................ 44, 45, 65 A A-B repeat....................................................... 38, 39, 47, 48, 49 Angle..................................................................... 19, 41, 42, 49 Audio language.............................................. 19, 40, 48, 49, 61 Auto standby...................................................
S600(J).book Page 87 Tuesday, June 4, 2002 10:43 AM Authorized Service Centers ® QUALITY SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC.
S600(J).book Page 88 Tuesday, June 4, 2002 10:43 AM LIMITED WARRANTY CONSUMER VIDEO 1-90 JVC COMPANY OF AMERICA warrants this product and all parts thereof, except as set forth below ONLY TO THE ORIGINAL PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from the date of original retail purchase for the period as shown below.
S600(J).book Page 89 Tuesday, June 4, 2002 10:43 AM VICTOR COMPANY OF JAPAN, LIMITED EN.
