Manual

In the following description, the buttons on the remote control unit are mainly used, however, you may use the
corresponding buttons on the front panel of the unit if available.
Turning on/off the unit
Press _11 on the front panel or press DVD (])/I - TV _/I on the remote control unit.
G3C_3
= o°:::
• You can turn on the unit by pressing the PLAY button or any one of
the DISC (1 through 3) buttons. In this operation, the unit starts
playback if the disc is set in the selected tray,
• You can turn on the unit by pressing any one of the A (OPEN/CLOSE)
buttons on the front panel.
DVD (bll
TV (b/I
Even if you press the _/I or DVD _/I - TV _11button to turn Off the unit, the unit is not disconnected from the AC power source
as long as it is connected to the wall outlet. This state is called the standby mode. In this state, the unit consumes a very small
amount of power.
)
Inserting and removing discs
17
1 PressA (0PEN/CLOSE)locatedon the right of the disc tray you want to open.
The corresponding disc tray opens.
2
Placethe disc inthe traY.rji__ Withthelabelsideup
• To insert an 8-cm disc, place it
in the inner recess.
3 PressA (0PEN/CLOSE)to close the disc tray.
• If you press --_ (OPEN/CLOSE) for the disc being played, the unit stops playback and opens the tray.
• You can insert or remove the disc by pressing --_ (OPEN/CLOSE) for a disc tray which is not in use for playback while
a disc in the other tray is being played, without interrupting playback.
_an playback DVD VIDEO, Audio CD, SVCD and Video CD discs only. Do not load other disc types. For details about |
1
isc types, see page 11.
J
I ,When loading a disc in the tray, be sure to position the disc inside the recess. Otherwise, the disc may be damaged when the
tray is closed, or the disc may not be removed from the unit.