Manual

SUBTITLE
You can select the default subtitle language to be
displayed if it is contained on the disc.
Each time you press
CURSOR 1_, the language
setting changes in the
following order:
I Pr_ESS
ENGLISH -* SPANISH -* FRENCH I-* CHINESE -*
GERMAN I"+ ITALIAN I-* JAPANESE I-* language code
from AA to ZU
(See "Table of languages and their abbreviations" at
the end of this manual.)
Pressing CURSOR < changes the language setting in
the reverse order of the above.
* If the selected language is not recorded, the disc's
default subtitle language will be displayed.
ON SCREEN LANGUAGE
You can select the on*screen display language to be
displayed.
Each time you press
CURSOR 1_, the language
setting changes as
follows:
I Pr_ESS
Eng,sh IONSCREEN "OO.OE EE.O.,S.
Chinese I _l_e-_ _1_'_ ]_]
Spanish I 'DIOMAENPANTALLA 4[ ESPAI_OL 1_ I
Pressing CURSOR < changes the language setting in
the reverse order of the above.
initial settings
DIGITAL AUDIO OUTPUT
To connect the unit's
digital output to an
external device equipped
with a digital input, this
item must be set
correctly.
• PCM ONLY:
When you connect the DIGITAL OUT jack of the unit to
the linear PCM digital input of other audio equipment.
• STREAM/PCM:
When you connect to the digital input of an amplifier
to a built*in DTS, Dolby Digital, or MPEG
multichannel decoder.
• DOLBY DIGITAL/PCM:
When you connect to the digital input of a Dolby
Digital decoder, or an amplifier with a built-in Dolby
Digital decoder.
The following chart shows the relationship between
types of playback discs and output signals.
Playback discs
STREAM/PCM PCM ONLY
48-kHz, e=
DVD with 48-kHz, 16-bit linear
16-bit linear PCM
PCM
DVD with 48-kHz, 48-kHz, e-
20/24-bit linear 2g-bit linear
PCM PCM
DVD with 96-kHz, No output e-
linear PCM
DVD with DTS DTS <-
bitstream
DVD with Dolby Dolby Digital 48-kHz,16-bit
Digital bitstream linear PCM
DVD with MPEG MPEG e-
multichannel bitstream
Video CD/SVCD 44.1-kHz, e-
16-bit linear
PCM
Audio CD 44.1-kHz, e-
16-bit linear
PCM
Audio CD with DTS e-
DTS bitstream
Output
DOLBYDIGITAL/PCM
NOoutput
e-
48-kHz, 16-bit
linear PCM
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD discwith DTS,
use a DTS decoder to get correct signals from your
speakers.Never usethe unit's analog output jacks,which
output incorrect signalsthat may damage your speakers.
If you connect the analog outputs and digital outputs
simultaneously, be sure to select the source of the
amplifier correctly, or set the level control of the amplifier
connected to the analog outputs to minimum,
/
44