DVD VIDEO PLAYER XV-N5SL [3 _,_o_ ............................ , _l / INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No.
Warnings, Cautions and Others Mises en garde, pr6cautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. f_AUTIQN: TQ REDUCE TH£ RISK QF ELE_RI_ SHOCK: ATTENTION Afin d'6viter tout flsque d'61ectreeution, d'ineandie_ etc. 1. Ne pas enlever lee vie ni lee panneaux et ne pas ouvrir le coffret de I'apparefl. 2. Ne pas exposer I'appareil e la pluie nie l'humidi_.
Table of Contents Repeat Supplied accessories .......................................................... Notes on handling .............................................................. Important cautions ..................................................... Safety precautions About discs ......................................................................... Playable disc Non-playable Audio formats Disc structure types ................................................................... discs .......
Supplied accessories • Audio/Video Component cable (Yellow/White/Red) video cable (RedlGreen/Blue) • Remote Control Unit (x 1) • R6P(SUM_3)/AA(15F) 2 (x 1) battery (x 2) (x 1)
introduction Notes on handling Installation of the unit • Select a place which is level, dry and neither too hot nor too cold (between 5_C and 35°C, 41_F and 95°F). • Leave sufficient distance between the unit and the TV. • Do not use the unit in a place subject to vibrations. Power cord • Do not handle the power cord with wet hands! • A small amount of power (1.1 W) is always consumed while the power cord is connected to the wall outlet.
Introduction About discs Playable and non-playable I ovoV,OEOI S,VCO I _The I disc types are as follows: I Video CO dio CO WdeoCO g@ DVD Logo is a trademark. • CD_R and CD-RW discs recorded in the Audio CD, Video CD, SVCD, MP3 or JPEG format can be played back. However, some discs may not be played back because of the disc characteristics or recording conditions. Note that unfinalized discs cannot be played back. • DVD-R discs recorded with the DVD VIDEO format can be played back.
introduction (For DVD VIDEO) How to handle discs A DVD VIDEO disc is comprised of "titles" and each title may be divided into "chapters." For example, if a DVD VIDEO disc contains some movies, each movie may have its own title number, and each movie may be divided into some chapters, in a DVD VIDEO KARAOKE disc, each song usually has its own title number and does not have chapters. When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged.
Connections _Before using the unit, you have to connect the unit to a TV and!or amplifier, Do not connect the AC power cord until all other connections have been made. • Connect VIDEO OUT of the unit directly to the video input of your TV. Connecting VIDEO OUT of the unit to a TV via a VCR may cause a monitor problem when playing back a copy_protected disc. You may also have a monitor problem when connecting the unit to an integrated TV/Video system.
Getting Connection to a TV equipped You can enjoy jacks of your high TV with picture quality the video with by connecting component the unit's started jacks COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN cabJes. Blue Green Red Component video cable (supplied) The unit Blue Green_ Scan mode Red TV seJector ¸¸¸¸iN ¸ Wh ire Audio cable (not supplied) _T Red o0,0 ................. • Connect "Y" to "%" "Pa" to "PB"(Ca), "PR" to "PR"(CR) correctly.
H Gettingstarted About SCANNING MODE To display video on the television (monitor) screen, the conventional scanning method is called "Interlaced scanning." With this method, only half of the horizontal lines are displayed at a time. So two fields complete a single picture (frame); i,e., the first field, containing all the odd-numbered lines, is displayed followed by the second field, containing all the even-numbered lines.
Getting started You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver. Connect the unit's AUDIO OUT (LEFT/RIGHT) jacks to any lineqevel inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver. The unit Amplifier Red_ or receiver _White _Inot supplied) NOTES • When using the unit with a stereo amplifier or receiver,set "ANALOG DOWN MIX" in the "AUDIO" preferencesto "STEREO" (see page 53}.
Gettingstarted • When you make digital connection, we recommend signal may be output from the DIGITAL OUT. also to make the analog connection, because, depending on discs, no • When you connect the unit's DIGITAL OUT to a digital audio device, before using, set "DIGITAL AUDIO OUTPUT" in the "AUDIO" preferences correctly according to the connected audio device. If "DIGITAL AUDIO OUTPUT" is not set correctly, loud noise may be generated from speakers, causing damage to them.
Getting started Using the remote control unit Using the remote control, amplifier/receiver. The battery compartment remote control unit. you can operate not only all the functions is located on the back of the 1 Press down on the point shown by the arrow at the top of the compartment cover, and pull up the cover to open the compartment.
Gettingstarted You can operate your TV from the remote Setting the remote operating your TV control control unit. signal for 5 Release TV/VlDEO _ CANCEL. 6 Try to operate the TV by pressing TV STANDBY/ON O/I. If your TV turns on or off, you have successfully the control signal. The following TV. To use A/v TV _ DVD switch CANCEL Numeric numeric _'I_(VOL-, buttons VOL+), the TV/VIDEO for TV control, set the to "TV.
In the following description, we assume use the corresponding i TV @ buttons q DVD _ that the buttons on the remote on the front panel control unit are mainly used; however, you may if available. Make surebuttons that the - DVD switch on the remote numeric for TV controllfng the unit. control unit is set to _DVD" when usfng the Airfoil.., and Before operation Press DVD STANDBY/ON (bll on the remote control unit or press STANDBY/ON (bll on the front panel.
Basic operations We recommend you to set the display language, TV monitor type and digital output before using the unit, by following the procedure below. See "Changing the initial settings" beginning on page 49 for details about each setting item. C_3 C_3 CD ENTER CHOICE i; _,._i iiii 1 PressCHOICEfor a few secondsto bring up 5 Press ENTER. the first page of the DVDPLAYERSETUP display.
Basic operations Basic playback This section describes basic operations for playback of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and JPEG disc playback, see the separate chapter beginning on pages 41 and 44. ..... STAN DBY/ 0 NOil OPEN/CLOSE C_3 c2_ C_3 • I_II / II Disc tray 1 Press__to open the disc tray. With the label side up 2 Placea disc in the disc tray. 3 Press__to close the disc tray. The unit reads the disc information opening display and the appears on the TV screen.
Basic operations Available : Press The unit starts playback from the beginning.
Basic operations Available : Pressii. The unit pauses playback. To resume playback, press I_. Resuming playback The unit can memorize the position on a disc where you interrupt playback, and resume playback from that position later. You can set two resume modes (DISC RESUME and ON) using the preference display. See page 54 for details about how to set the resume mode. • The resume mode is initially set to "ON" when you purchased.
Basle operations • The interrupt position is also stored by pressing STANDBY/ON _)11(on the front panel) or DVD STANDBY/ON _)11(on the remote control unit), • To clear the memory, press• while the disc stopped, Available When the resume I WhiJe stopped, mode is set to "DISC RESUME" or no disc is inserted 1 Press__to insert a disc for which the unit has stored an interrupt position.
Basic operations Variable speed playback You can speed up or slow down playback, C_3 Ci3 or advance the video frame by frame. C2:3 II [J___ °I' ........................... i II Available • During Method playback 1 {from the remote control Press_ unit only) or _. Each press of _ or I_ decreases or increases the playback speed. You can select from 2 times, 5 times, 10 times, 20 times and 60 times normal speed. Pressing I_ returns the unit to normal Method / : playback.
BasTe operations Available You can play back video in slow-motion. normal speed. • During playback You can select from 1/32 times, 1116times, 1/8 times, 1/4 times and 112times PressI1_then use _pq/_. To play forward slow motion, press D_lb,and to play reverse slow motion (for DVD VIDEO discs only), press .Sl_l. First, the unit plays the slowest speed, and each time you press the button, the playback speed increases. Pressing I_ returns to normal playback. Pressing II pauses slow motion playback.
Basic operations To locate the beginning of the scene or song You can locate the desired title or chapter (for OVO VIDEO), or track {for Audio CO/Video CD/SVCD) from which the unit starts playback. Numeric buttons _e _ /1_ o[ ........................ i J _I_ Available • For DVD VIDEO: For Audio CD: For Video CD!SVCD: Press_ : During playback During playback or while stopped Du ring playback with out PBC function or _. With an Audio CD, Video CD or SVCD, pressing the button skips a track.
BasTc operations NOTES • YOU can also specify the desired title during DVD VIDEO playback. See page 25 for details. • During DVD VIDEO playback, if a menu is shown on the W screen, the numeric buttons may be used for selecting an item in the Fltanu. • When _ appears on the _t screen: The title, chapter or track you have selected • This function is not contained Tnthe dTsc. does not work dedng Video CD/SVCD playback with PBC function {see pages 5 and 24}.
Basic operations The indication on the rightmost end of the status bar shows the unit's transport status as follows: Playback mode, Stop mode, Pause mode, Fast forward/backward playback Slow motion mode, Note that pressing various functions. (Example playback mode, ON SCREEN again brings up the menu bar under the status bar, from which you can access of the menu bar for DVD VIDEO) See page 37 for details about the menu bar.
This chapter describes operations for various advanced functions of DVD VIDEO, Audio CD, Video CD and SVCD discs. For MP3 and JPEG disc playback, see the separate chapters beginning on pages 41 and 44. Make sure that the TV - DVD switch on the remote control unit is set to '*DVD" when using the Aivi
Advanced operations 2 Usethe numeric buttonsto select the desired item. 2 Usethe numeric buttons to specify atitle to be played. • To select a number between 1 and 10: Press the corresponding button for the number. • To select a number higher than 10: Use the +10 button. Examples: To select 13: +10 ->3 To select 34: +10 -->+10 ->+10 ->4 To select 40: +10->+10->+10->10 • To select a number between 1 and 10: Press the corresponding button for the number.
Advanced operations 3 Usethe numeric buttons (0 to 10) to enterthe desiredtime. The specified time is displayed in the pull-down , To correct a mistake Use -tl repeatedly to move back to the digit where you entered a undesired numeral (the left most "J' digit), and reenter the correct time. menu. (Example : changing • "I0" button works as "0_'and "÷10_'button is not used with this function. "2:35:_" to "2:34:_.") ['rIME 2:35: ] _, Press 4.
Advanced Depending on the disc type and whether the disc is being played back or not, the contents shown on the TV screen differ. While stopped ]-he opening each title scene of operations Changing the playback order You can play tracks on an Audio CD, Video CD or SVCD in a specific order or in random order.
Advanced operations 4 Specifytracks in the desired order using the numeric buttons. • To select a number between 1 and 10: Press the corresponding button for the number. • To select a number higher than 10: Use the +10 button. Examples: To select 13: +10 -->3 To select 34: +10 ->+10 ->+10 ->4 To select 40: +10->+10->+10->10 Up to 99 tracks can be programmed. You may select the same track more than once. The totaJ program the program While stopped and the program table is shown on the TV screen, press m.
Advanced operations 3 Press ENTER. The unit starts random playback. With a Video CD/SVCD disc, the menu bar is automatically dismissed. During random playback, the RANDOM indicator lights in the display window on the front panel. Repeat playback You can repeat playback of the current title/chapter (for DVD VIDEO), or current/all tracks (for Audio CD!Video CD/ SVCD). You can also repeat playback of a desired part. After playing all tracks of the disc, the unit stops the disc and exits the random mode.
Advanced operations Audio CD/Video CD/SVCD [LO3_ES • YOU can also select the repeat See pages 38 end 39. mode via the menu bar. (Screen example for Audio CD) • When the program playback mode is active with an Audio CD, Video CD or SVCD, the repeat mode changes in the same manner. Note that, however, in the "O" mode the unit repeats all the programmed tracks, instead of all tracks on the disc.
Advanced operations 2 Use A/T or SUBTITLEto select the subtitle. Changing the language, sound and scene angle Each time you press AJr With some DVD VIDEO discs, you can choose a desired subtitle language and/or audio language/sound, as well as a desired camera angle. Similarly, you can choose a desired audio channel {or channel combination) of a Video CD/SVCD disc, as well as a subtitle channel of an SVCD disc. * or SUBTITLE, the subtitle language changes.
Advanced operations , For DVD VIDEO Eachtime you press AI'v or AUDIO, the audio language changes. Example: Available : ;:_ _, 1,/3ENGLISH The audio selection setting allows you to change the audio language of a movie, or to listen to karaoke with or without the vocal.
Advanced operations 3 Press ENTER. You can see the picture from the selected angle. The angle selection Available : You can enjoy a variety of scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles. window is dismissed. From the angle list • During DVD VIDEO playback 1 Pressand h01dANGLEfor more than 1 second. Up to nine camera angles recorded appear on the TV screen.
B Advanced oparatfona Special picture playback and picture/sound effect Available : You can view continuous still images, or zoom in or out of the picture. You can also adjust the picture characteristics, as well as simulate surround sound using a stereo system. ..... ZOOM +/Available : • During playback or while paused 1 PressZOOM+ 0r-. Pressing ZOOM + causes the unit to zoom in on the image, and pressing ZOOM - causes the unit to zoom out.
Advanced operations 3 To define a user setting, select a parameterto beedited using A/'v from the following. • To return to normal playback. Press ENTER, GAMMA Controls the brightness of a shaded portion without changing the brightness of the entire picture. This control is optimum when you adjust the pictures of software which generates subdued black in a bright room. The setting range is +41o -4. • While zoomed, the picture may look coarse.
Advanced operations 3 PressA/v NOTES to adjust the effect level. You can set the effect • The number of setting steps sedea for different parameters. The higher value level enhances from the "1" to "5." effect. • To dismiss the VFP mode aelestion window: Press VFP- PROGRESSIVE SCAN, • The window for VFP mode selection end parameter setting disappears if no operation is made for about 10 seconds.
Advanced operations Menu bar functions This section describes the functions you can perform via the menu bar. The available menu bar functions differ depending on the disc type. Numeric ....... buttons ENTER _3 _ cz_ ca3 _ c_3 C_3 _ ...... ON SCREEN 1 Use
/ Advanced operations Menu The following table shows the menu bar functions available for DVD VIDEO. Note that, in the description of the operation column, we assume the associated icon is selected. icons ® Press ENTER to select the time mode from the following, TOTAL _ Time mode selection (During TiME _ REM _ Return to initial playback only) Selects the time mode shown in the display window on the front )anel and inthe status bar.
Advanced Angle selection (during playback Press ENTER to open the pull_down window. Use Air to select a scene angle. Example: 1t3 _ 2/3 4-_ 3/3 Press ENTER to begin playbackwith the selected scene angle. (See page 33 for detafla about angle selection,) only) Selects a desired scene angle in a multi-angle part. Menu icons The following table shows the menu bar functions available for Audio CD/Video CD/ SVCD.
Advanced operations 1 Press ENTER to activate random playback. (See page 28 for details about random,) Random (While stopped only) Activates random playback, Audio selection (During only) Video CDiSVCD playback Selects the audio channel(s), Subtitle selection (During SVCD playback only) Selects the subtitle, 4O 1 Press ENTER to open the pull-down window. 2 Use _kiv to select a desired audio channel(s). 3 Press ENTER to playbackwith the selected audio channel(s).
The unit can play back MP3 files on a personally recorded CD-R!RW disc or commercial CD. We refer to a disc that contains MP3 file as an "MP3 disc" in this manual. Though functions available with MP3 discs are limited, operations for the available functions are similar 1o those for Audio CD discs. Note that if a disc contains both of MP3 and JPEG files, you can only play back files of the type selected by the MP3/JPEG setting in the PtCTURE preference display (see page 52).
MP3 disc playback 2 Move the bar to a desired Group using _/T. £LO__.s • The current Group and Tracknumber are shown on the display window in the following manner, On the right column, are shown. When selecting (highlighted). Tracks in the selected a Group, Track 1 is initially 3 Selecta desiredTrack using _/'_.
MP3 disc playback Available You can select a desired Group directly Group number. : by specifying Available the You can repeat playback of the current Group or all MP3 files on the disc. : Track, current Numeric _ _ ........... buttons TITLE/GROUP II During playback or while stopped 1 Press REPEAT. II During Each time you press REPEAT, the repeat mode changes as follows. You can see the current mode via the display window as well as the MP3 CONTROL display.
The unit can play back JPEG files on a personally recorded CD-R!RW disc. We refer to a disc that contains JPEG files as a "JPEG disc" in this manual. Note that if a disc contains both of MP3 and JPEG files, you can only play back files of the type selected by the MP3/JPEG setting in the PICTURE preference display (see page 52). "JPEG" is an abbreviation Experts Group. that "JPEG" utilizes There are three follows.
JPEG discplayback 3 Selecta desiredfile using _lz_._d. 4 Press ENTER. Basic operations The selected file (still picture) is shown on the TV. In the display window, you can see the current Group and File numbers. Available : When loading a JPEG disc, after the disc contents are read, the JPEG CONTROL display automatically appears on the TV screen.
JPEG dfsc playback To see pictures continuously [slide show mode] You can see Files (still pictures) one after another automatically in the slide show mode. In this mode, each File (still picture) is displayed for approximately 3 seconds. The next File will then be displayed. ZOOM +/• WhiJe a JPEG image is displayed on the TV screen Available 1 PressZOOM+ 0r-. Pressing ZOOM + causes the unit to zoom in on the image, and pressing ZOOM - causes the unit to zoom : C]CZZZZ2_ OUt.
JFEG discplayback Direct selection I During playback or while stopped 1 PressTITLE/GROUE "-J' is shown in the Group display Available : area of the display window. (Front panel display window example) Numeric ®_m_,,._G=,,,,_= buttons -------- TITLE/GROUP ..... From the JPEG CONTROL display is shown 1 Make sure that the black (cursor) bar is in the left (Group) column. if it is in the right column, left column. press .
JPEG dfac playback (TV Screen) NOTES Selected repeat mode • TOstop slide show playback {to dismiss the picture) in the middle of slide show playback: Press • or MENU. JPE6 60NTHQL REPEAl 8ROUP 6r_u_ : 01 /1 g The TV screen returns to showing the JPEG CONTROL display. Pressing _ resumes slide show playback from the last pTcture you displayed.
Make sure that the TV - DVD switch on the remote control unit is set to "DVD" when using the A/Vi.,_I/I,_. and numeric buttons for controlling the unit. Selecting preferences This chapter refers to the settings which are already made when you purchase the unit. Read this section when you want to connect this machine to a wide-vision TV set, or when you want to otherwise change the settings according to your preferences and viewing environment. c2_ c3_ c_2_ ENTER CHOICE \_ While stopped 1 PressCHOIC
Changing the initial settings This menu allows you to select the languages used for DVD VIDEO playback, as well as the on-screen display language of the unit. • During playback, you can bring up any page of the preference displays; however, only "ON SCREEN LANGUAGE" can be set on the "LANGUAGE" page, MENU LANGUAGE You can select the default menu language to be displayed if it is contained on a DVD VIDEO disc.
Chsn_fng This menu allows you to select options monitor screen. MONITOR TYPE 16:9 NORMAL You can select the monitor type to match your TV when you playback DVD VIDEO discs recorded for wide-screen televisions.
Changing the initial settings SCREEN SAVER You can set the screen saver function ON or OFE See page 16 for details about the screen saver function. ° MP3/JPEG The unit can play MP3 and JPEG files recorded on a CD_PJCD-RW disc. However, if a disc contains both MP3 and JPEG files, you can only play files of the type selected in this menu item. * ON The current ° picture gets dark. OFF The screen saver function is off.
Chan_fng the initial settings Digital output signal chart Output Disc type PCM ONLY DVD with 48/441 kHz, I6/20/24 bit linear PCM DOLBY DIGITAL/PCM 48/44.
Changing the initial settings This menu allows you to set various RESUME You can select the resume playback mode. system options. ° ON The unit can resume playback of the disc from the position where play was last interrupted, if the disc is stilJ in the disc tray. * OFF The resume function ° • See page 18 for details about the resume playback function. is not active. DISC RESUME The unit can resume playback of the last 30 discs played.
Changing the fnitia4 settings Limiting playback by children Available This function restricts playback of DVD VIDEO discs which contain violent (and other] scenes according to the level set by the user. For example, if a movie which includes violent scenes supports the parental lock feature, such scenes which you do not want to let children view can be cut or replaced with other scenes.
Changing the initial settings 5 While I_ points [SETLEVEL],press ENTERto bring up the pull-down menu. In the puIFdown menu, "NONE" and levels "8" to "1" are available. "NONE" does not restrict playback. Level "1" is the strictest level. Discs rated higher than the selected level are restricted. Available You can change the Parental Lock settings _b _ _b : later. Numeric buttons ENTER ,=, 6 Use Ai'_'to select a desired parental lock level, then press ENTER. 1_ moves to [PASSWORD].
Chan_fng the fnitia4 settings 3 To changethe "COUNTRYCODE"or "SETLEVEL,"press ENTERto bring up the associatedpull-d0wn menu when [;_ is pointing the desired item. To select the item to be set, use A/V down menu is shown. Available when no pull- 4 Use Ai_, to select the desired option and press ENTER. Note that if you change the country code, you must reselect the Parental Lock level. : if the parental level is set to a strict value, some discs may not play at all.
Names of parts and controls Refer to the corresponding pages indicated in 0 for details.
Addftional information ® ® _1_;! OPEN/CLOSE L_)Numeric button {15, 17) buttons _ ANGLE button (23, 33) @ Infrared signal window (11) _1)RETURN button (24) @ TV - DVD switch (12, 13, 24, 41, 44, 49) (;_ TOP MENU button (24) _ TV STANDBY/ON C_Cursor selection (A Up, v Down) CH (+/-) buttons (12) _;@DVD STANDBY/ON _) Cursor selection (< Left, I_ Right) VOL (+/-) buttons (12) _,_ TITLE/GROUP C-_:) CHOICE button {14, 49) $,_ ENTER button !:t;__
Additional information AV COMPU LINK remote control system The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation. If your video/audio player (such as a DVD player, CD player and VCR) and television or/and amplifier/receiver support the JVC AV COMPU LINK system and are tied with the JVC AV COMPU LINK cable(sl, simply starting the player will automatically make all necessary settings on the television and!or amplifier/receiver to allow you to enjoy the playback.
Additional information Troubleshooting What appears to be a malfunction may not always be serious. Please go through the following lint before requesting service. Possible cause Symptom Power does not come on.
Additional information Possible Symptom No picture is displayed on the monitor. Connection parts, The picture is noisy or blurred, Remedy of video cable is incorrect. Input selection No picture is displayed on the monitor or the screen is blurred or divided into two cause Connect the cable correctly. of TV is incorrect, Select correctly. Disc is not playable, Use a playable The unit is in the progressive scanning mode (Le.
Additional information Frequently Asked Questions Can I play back DVD VIDEO and Video CD discs purchased abroad? Can I play back a DVD VIDEO disc without Code number? any Region Can I play back a CD=WRW disc with still pictures than the JPEG format? in other Can I play back audio on a disc labeled "Dolby Digftal EX"? You can play DVD VIDEO discs with the Region Code (local code) containing "ALL" or "I" recorded usfng the NTSC or PAL formats (PAL disc signals are reproduced by converting to the NTSC
Additional information Specifications *Specifications and appearance are subject to change without prior notice. General Readable discs: Video format: DVD VIDEO, DVD-R (Video format), SVCD, Video CD, Audio CD (CD_DA), MP3 format, CD-R!RW {CD-DA, SVCD, Video CD, MP3 format, JPEG) NTSC, 480i (Interlaced scan)/480p (Progressive scan) selectable Other Power requirements: Power consumption: Mass: Dimensions {Wx H x D): AC 120 V %, 60 Hz 14 W (POWER ON), 1.1 W (STANDBY mode) 2.4 k# {5.
Additional Appendix A: Country/Area This list is used for the Parental AD Andorra Lock operation. code list for Parental Lock For details, see page 55.
Additional information Appendix B: Glossary 480i/480p Indicates the number of scanning lines and scanning format of an image signal. 480i indicates 480 scanning lines with interlace format, and 480p indicates 480 scanning lines with progressive format. Aspect ratio A ratio which defines the shape of the rectangular picture in a TV. It is the width of the picture relative to the height. A conventional TV picture is 4:3 in aspect ratio. Bitstraam The digital form of multichannel audio data (e.g., 5.
Addftional Letter box A type of video display for normal (4:3) TV screens. Black bars are shown at the top and bottom of the image to allow playing of a wide-screen (16:9) movie without cutting off any of the image. Linear PCM audio PCM stands for "pulse code modulation." Linear PCM is the usual method for digitally encoding audio without compression, and is used for the audio tracks on DVD VIDEO discs, Audio CDs, etc.
QUALITY JVC ! SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.com Dear Customer, In order to receive the most satisfa_[on from your purchase,please read the instruction booklet before operating the unit,in the event that reoa_rs are necessary, please call I (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC,cem Remember to retain your Bill of SaJe for Warranty Service.
"JVC * LIMITEDWARRANTY * * JVC COMPANY ._ ORIGINAL ;i- of original OF AMERICA warrants this product and al Darts thereof, "* CONSUMER VIDEO 1-90 except as set forth * below ONLY TO THE PURCHASER AT RETAIL to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP retail purchase for the _eriod as shown below. The Warranty Period"_ from the date "R * _r , w *W PARTS * LABOR 1 v. 90 DAYS _, * lr * THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY 150) UNITED STATES.
JVC VICTOR COMPANY OF JAPAN_ LIMITED _EN, © 2002 VICTOR COMPANY OF JAPAN, LIMITED _ 0702KTYBICJSC
