JVC DVD VIDEO PLAYER XV-S200BK i JVC ]I"_,,'-,, "-,,'-',, _"_ [[ I J_iiiimiiii.m © / VIDEO= _------'-_ 3D_'hONIC _ _ mGIIILAUmO INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No.
Warnings, Cautions and Others Mises en garde, pr6cautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) lYO USER SERVICEABLE PARTS INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction Table of Contents Page 2 Features ............................................................................... 2 Supplied accessories .......................................................... 2 About this instruction manual .......................................... 3 Notes on handling .............................................................. 4 Page 5 Names of parts and controls ............................................. Front panel .................................................
Features Supplied accessories • Audio/video • Strobe cable (x 1) function The unit can display nine continuous still pictures on the "IV screen. // • Digest function • Remote Control Unit (x 1) You can select the desired selection to be played from the opening scenes displayed on the TV screen. • Angle function* You can select a desired angle from multiple angles recorded on the DVD VIDEO disc. camera • Zoom function You can view scenes close-up.
Introduction About this instruction manual • This instruction manual basically explains operations according to the format as below. • For operations for MP3 CD discs, see "MP3 CD playback" on and a_er page 35. The other sections not refer to MP3 CD playback. You can play titles or tracks on discs inserted in random order by using the Random function. of this manual do These symbols indicate the types of discs which the operation can be used for. _i i,_i_t_i_ .
Introduction Notes on handling Important Safety precautions cautions Installation of the unit Avoid moisture, water and dust Do not place the unit in moist or dusty places. • Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C, 41°F and 95°F). • Leave sufficient distance between the unit and the TV. • Do not use the player in a place subject to vibrations. Avoid high temperatures Do not expose the unit to direct sunlight a heating device.
Names of parts and controls Refer to the corresponding pages indicated in 0 for details. J' rr. _J-8_ [_ME_'SU PER VCL*_e'_;[_ PLJ_YER ......... [ Q C_ ............................. \\\\\\\\ F'-7_ k_ i ) ® II (PAUSE) button (18, 36) Pauses playback. Also, used to display nine continuous still pictures (STROBE function). ® Display window (8) Indicates the current status of the unit. ® Remote sensor Receives signals from the remote control unit.
Preliminary knowledge Q ® ® (X) SUBTITLE AUDIO DIGEST (_ THEATER POSITION ZOOM ® ® SELECT ® @ @ @ @ RM-SXVS.
Preliminary knowledge C_ OPEN/CLOSE button (17) Opens and closes the disc tray. C_ PLAY MODE button (22, 26, 27, 28, 36, 37, 38) Displays an on-screen display for controlling the advanced playback functions. C_ 3D PHONIC button (32) Produces a simulated surround e_ect. C_ Numeric buttons (11) Used to select a selection, as well as used to enter a time for the 33me search and a chapter number for the Chapter search.
Preliminary knowledge ,9 ii i & i i I IGROUPTITLETRACKCHAPI I01 A-B I ooooo ooo ooooo ooooo ooo ooooo ooooo ooo ooooo ooooo ooo ooooo ooooo ooooo o o o ooooo ooooo ooooo o o o ooooo ooooo ooooo o o o ooooo ooooo ooooo o o ooooo ooo ooooo ooooo ooo ooooo ooooo ooo ooooo ooooo ooo ooooo ooooo o o o ooooo ooooo o o o ooooo ooooo o o o ooooo ooooo o o ooooo ooooo o o ooooo ooooo ODD ooooo ooooo ooooo ODD ooooo ooooo ooooo ODD ooooo ooooo ooooo ODD ooooo ODD ooooo ooooo ODD ooooo
Preliminary Operational Principles The unit provides several on-screen displays. With some displays, you can set or select preferences functions, while the others are display-only. Opening knowledge or displays The Opening display appears automatically conditions. in some Opening display At the bottom, the following information are indicated depending on the unit's status. ° NOW READING: The unit is now reading the disc information (TOC).
Preliminary knowledge Play mode displays Pressing the PLAY MODE button brings up the play mode display in which you can control playback functions. Different displays appear depending on the disc type and the unit's status. While stopped During DVDVIDEO playback [ ..... ] I F_r_T During Audio CD/MP3 CD playback I........ // Status displays Pressing the DISPLAY button during playback brings up the status display.
Preliminary During DVD VIDEO playback, the following meanings. Displayed E_ at the beginning of a scene recorded from over the picture. multiple These have angles. (See page 29.) : 0)) : Q you may see icons displayed knowledge : Displayed at the beginning page 31.) of a scene recorded with multiple audio languages. Displayed page 30.) at the beginning of a scene recorded with multiple subtitle You can set the unit not to display on-screen described on page 42.
Preliminary knowledge About discs Playable and non-playable Playable disc types are as follows: discs DVDVIDEO Video CD SVCD IDIGITAL VIDEO VIDEO Audio CD DIGITAL i AUDIO The DVD VIDEO Logo is a trademark. • CD-R and CD-RW discs recorded with SVCD, Video CD, Audio CD or MP3 format can be played back, though some may not be played back because of the disc characteristics or recording condition. • DVD VIDEO players and DVD discs have their own Region Code numbers.
Connections *In the following description, "TV" may be substituted with "monitor" or "projector." *Before using the unit, you have to connect the unit to a TV and/or amplifier. • Do not connect the AC power cord until all other connections have been made. • Since different components have different terminal names, carefully read the instructions supplied component you are going to connect. with the You can enjoy using the unit by simply connecting itto a TV.
Getting started You can enjoy high picture quality by connecting the unit's COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables. Note that the COMPONENT VIDEO OUT jacks are not active in the initial (factory preset) condition. See below for details how to make them active.
Getting You can enjoy high-qualiW audio by connecting the unit's audio output to your amplifier started or receiver. The unit Amplifier White or receiver IN f Audio cable (not supplied) • Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier You can enhance the sound quality by connecting the unit's receiver, CD Recorder, etc. by using an optional digital cable.
Getting started When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the unit's AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The STANDBY indicator lights and setup is completed. /_ • • • • • Warning Disconnect the Disconnect the Disconnect the Do not connect Do not pull the accidents. /_ power cord if you are not going to use the unit for a long time. power cord before cleaning the unit.
In the following description, the buttons on the remote control unit are mainly used, however, corresponding buttons on the front panel of the unit if available. you may use the Turning on/off the unit Press STANDBY/ON press (5/I (5/I on the front on the remote control unit or panel. QFEN O STANDBY/ON Oil MODE PH_rC _ANCEL RETURN Q Q Q Q QQO L O O I |iiiii,iiii,== ] O \\ / • You can turn on the unit by pressing the I_ button.
Basic operations Basic playback Now you can play a disc. First, let's enjoy simple playback according to the following procedure. For basic operations using a DVD VIDEO, Audio CD, Video CD or SVCD disc with an MP3 CD disc, see pages 35. Press_. The unit starts playback from the begining. NOTES • When the resume point is memorized, pressing _ starts playback from that point instead of the beginning. See page 19 and 42.
Basic operations • During playback Press I_1_ or _. Press _ to locate the beginning next chapter, title, or track. of the current chapter, title, or track, and press _ to locate the beginning of the NOTE • When you play a Video will generally CD/SVCD disc with the PBC function locate the beginning Resuming of the title, chapter or a DVD VIDEO disc, the unit may locate a different place, but it or track. playback The unit can memorize time you press I_.
In this section, we describe advanced operations for playback of a DVD VIDEO, Audio CD, Video CD or SVCD disc. For operations with an MP3 CD disc, see pages 35, 36, 37 and 38. Playing from a specific position on a disc • With some discs, you can also select items by entering the corresponding number using the numeric buttons, which may cause the unit to automatically start playback.
Advanced When "NEXT" or "PREVIOUS" appears on the TV screen, the unit generally works as follows: • Pressing _ advances to the next page. • Pressing _ returns to the previous page. • The method of the operation is different depending on the disc. operations NOTES • During DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting an item in the menu. • When (_ appears on the TV screen: The title or track you have selected is not contained in the disc.
Advanced operations NOTES • You can also locate a desired chapter directly by specifyingthe chapter number using the numeric buttons during playback (except when a menu is shown). See page 21. If the current title of a DVD VIDEO disc being played is divided into chapters, you can skip to a desired chapter by specifying the chapter number using the on-screen display. • When the chapter number is incorrect in step 3: Overwrite the incorrect number with the correct number.
Advanced 3 Usethe numeric buttons (0 to 9) to enter the time. title 4 PressENTER. The unit starts playback from the specified for DVD VIDEO) I F_pEAT_F_P_^T for Audio _I_ESE_H CI_.SE_CH I IREpEAT _E_._T Selected time time. "+10" • To turn off the play mode menu: Press PLAY MODE. _AF_H Selected time buttons are not used in this function. I_T _T _ _C_LL The unit can display the opening scene of each title or chapter on a DVD VIDEO or each track of a Video CD/ SVCD.
Advanced operations Special picture playback The unit provides special picture playback functions including Frame-by,frame, Strobe, Slow-motion and Zoom. 2 UseCURSORA/_,/
Advanced • Pressing II when the nine still pictures advance to the next nine still pictures. is shown operations will • Pressing _ when the nine still pictures is shown will advance pictures in normal playback speed. • To cancel strobe play Press and hold II for more than 1 second. NOTE 1 • If you press and hold II for more than 1 second during playback, nine still pictures also appear but they advance in normal playback speed. i_r 2 J_ • During playback or while paused 1 PressZOOM.
Advanced operations Changing the playback order You can play titles or tracks on a disc inserted desired order or in random order. 15 The programmed number is shown program number. in the 16 1_ lS title/track under each If you specify a wrong selection Press CANCEL. The last selection erased. You can play titles or tracks on a disc inserted desired order by using the Program function. 1 _5' _ in the programmed is To clear the program Press •. 4 Press_ to start program play.
Advanced operations Repeat playback You can play titles or tracks on a disc inserted order by using the Random function. in random You can repeat playback of the current selection or all disc contents (except DVD VIDEO). You can also repeat playback of a desired part. oDD 1 3 iL_ ...--.t._ c:_ 2 _ _' _ _" • While stopped _) 1 PressPLAYMODE. The play mode menu appears 2 UseCURSOR
Advanced operations Audio CD/Video CD/SVCD for Audio for Video CD/SVCD) CD) 2 Selected repeat mode Selected __ repeat mode o (2:) (:D O_O REPEAT ALL (all track repeat) 'E5 REPEAT 1 (current track repeat) No indication -2 r 3 (off) 2-1 • If you press • in REPEATALL or REPEAT1mode, the unit stops playback but remains in the mode. • If you press • in REPEATTITLE or REPEATCHAPTERmode, the unit stops playback and quits the mode. • • During playback 1 Press PLAYMODE.
Advanced • operations To quit A-B repeat playback Press 1. The unit stops playback and quits A-B repeat mode. • During playback, pressing ENTER when _> is pointed at [AB REPEAT] quits A-B repeat mode and continues playback. • You can also quit A-B repeat mode by pressing _ or m._. Selecting a scene angle of DVD VIDEO You can enjoy a variety of scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles.
Advanced operations Changing the language and sound For DVD VIDEO discs, you can select the subtitle language, as well as the audio language/sound included on a disc. For Video CD/SVCD discs, you can select the audio channel(s). <3_ <3D 0 <_) G) 0 <:Z) <_:) C) i 3 i2 o_ Jvc CD_ 1,2 • During DVD VIDEO playback 1 Pressand hold ANGLEfor more than 1 second. Up to nine camera angles recorded on a disc appear on the TV screen. // 3 • During playback 1 PressSUBTITLE.
Advanced operations For SVCD Pressing CURSOR 4/_ among the four subtitle follows subtitle regardless is recorded cycles channels of whether or not. You can also select the pressing SUBTITLE. subtitle OFF -14 for DVD VIDEO) as the 114 by 2/4 4/4 3J4 NOTES • For DVD VIDEO, the selected language may be abbreviated on the TV screen. See "Appendix A: Table of languages and their abbreviations" at the end of this manual.
Advanced operations Selecting the picture character Enjoying virtual surround sound You can select the picture character from among four options according to the source program, lighting condition of the room and/or personal preference. Using the 3D PHONIC function, you can get a simulated surround effect from your stereo system. 1,2 GCDO _'_ --1, C_ _ID _ C_ C) QO QO(3D O_O _5"_' 2 _ _ _ _, • During // • During playback playback 1 Press3D PHONIC. 1 Press THEATERPOSITION.
Advanced operations TH EATE R You can enjoy sound effects like in a major theater Hollywood. in When you play a DVD VIDEO disc recorded in Dolby Digital which contains more than 3 channels, ACTION does not appear. Checking the status You can view the disc/Ume information, as well as the DVD functions status on the "IV screen. NOTES • The 3D Phonic display will automatically disappear if you do not change the 3D PHONIC for 5 seconds. • To turn off the 3D PHONIC display manually, press ENTER.
Advanced operations To dim the brightness of the display window You can dim the brightness of the display window. OOO 0OO OQ_ • During DVD VIDEO playback 1 PressDISPLAY. The DVD function screen. status display / appears on the TV 1 ,,IVC _L_H ENGUSH • When no disc is inserted or while stopped H • 34 1 PressCURSOR_, while holding down ANGLE. The current selections of the camera angle, audio language and subtitle language are shown.
This unit can palyback CD discs recorded by the M P3 format (we refer to those discs as MP3 CD discs in this manual). Operations for MP3 CD discs are similar to those for Audio CD discs, though there are some restrictions and differences. What is MP3? MP3 is the abbreviation of "MPEG1 Audio Layer 3". MPEG Audio is a compression specification that compresses the audio portion only. This image compression method is used in DVD or Video CD, etc. The audio data has been compressed into about 1/10.
MP3 CD playback Buttons 1 Holding down the +10 button for 2 secondsor Functions more. Starts playback Stops playback II "- - -" appears in the display window showing that you can now enter a three-figure number directly. completely 2 Pauses playback temporarily Skips back or forward Usethe numeric buttons (0 through 9) to specifythe desiredTracknumber directly. a Track *. • Example: Skips back or forward You can skip a Track across when a Group.
MP3 CD playback 3 Specify the groups in the desired order using the numeric buttons. See page 11 for details about how to use the numeric buttons. Up to 18 groups can be programmed. You may select the same group more than once. You can playback order. Groups on an MP3 CD disc in random i (Z_OO O(DC) oo_< 15 18 17 IS The programmed group number is shown under each program number. • 2 If you specify a wrong selection Press CANCEL. The last selection erased.
MP3 CD playback You can repeat playback Groups. m of the current Group or all OQG Q_O O_Q -t_ _3 _'_ 'i_5_ O O €:_ QOO OOc:D • During playback • During playback 1 Press DISPLAY. or while stopped The disc/time 1 PressPLAYMODE. The play mode menu appears on the TV screen. I • REPEAT REPEAT ALL repeat mode (all group 1 (current group repeat) repeat) No indication (off) • If you press • in REPEATALL or REPEAT1mode, the unit stops playback but remains in the mode.
3 Selecting preferences PressCURSOR
Initial settings SUBTITLE You can select the default subtitle language displayed if it is contained on the disc. to be DIGITAL AUDIO Each time you press CURSOR =-, the language setting changes in the following order: To connect the unit's digital output to an external device equipped with a digital input, this item must be set correctly. aENUL_NGUAGE _UO_ LANGUAGE 8UallTL_ O_ SC_ L.
Initial settings DOWN MIX To playback a DVD VIDEO disc recorded with surround MONITOR O_T_L _UO_ OUTPUT multichannel audio _=_"°_= correctly, the DOWN MIX setting must be properly made according to your ["=_"_' ] audio system. Note that this setting affects the output signal from the AUDIO (both DIGITAL and ANALOG) output jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio.
Initial settings ON SCREEN GUIDE The unit can display "on-screen guide" icons or characters on the picture, which show what is happening unit. _oNn1_ T_pE 8C_E_ 8AWI_ _sc_la_ GU_ to the disc or the AUTO When the unit is stopped for more than 30 minutes or 60 minutes, the unit enters standby mode automatically. ON • The on-screen STANDBY guide will be displayed. OFF "13me is set to 60 minutes. • The on-screen guide will not be displayed.
Initial settings 4While _ points [Set Level], use CURSOR
Initial settings 4To change the set level, use CURSOR
Initial settings When you set the parental level strictly, some discs may not be played back at all. When you insert such a disc and try to play it, the following Parental Lock on-screen display appears on the TV screen, asking you whether you want the parental lock to be temporarily released or not. c) €:_ €:D 1-2 1-1 I Usethe CURSORA/_, to move_ then press ENTER. moves to the PASSWORD field. When selecting [NO], press OPEN/CLOSE to remove the disc.
Care and handling of discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the player to malfunction. Label side Do not damage the label side, stick paper to or use any adhesive on its surface. Storage Make sure that discs are kept in their cases.
Additional information Troubleshooting What appears to be a malfunction service. may not always be serious. Symptom Possible Power does not come on. Power plug is not inserted case Too far from the following list before requesting Remedy securely. Plug in securely. the unit. The tip of the remote the right direction. Remote control Please go through More closer to the unit. unit is not pointed in Point the infrared light- emitting window toward the remote sensor on the front panel.
Additional information Specifications General Readable discs: Video format: DVD VIDEO, Audio CD, Video CD, SVCD, MP3 CD NTSC Other Power requirements: Power consumption: Mass: Dimensions (W x H x D): Video AC120V tk_,60Hz 14 W (POWER ON), 1.2 W (STANDBY mode) 2.4 kg (5.35 Ibs) 435 mm x 68 mm x 271 mm (17-3/16 inch x 2-11/16 inch x 10-21/32 inch) output COMPONENT (pin jacks): VIDEO OUT (pin jack): S-VIDEO OUT (S jack): Horizontal resolution: Y Output: PB/PROutput: 1.
Additional Appendix A:Table of languages and their abbreviations When you select the subtitle language or sound, the languages shown below are displayed the desired language, select the abbreviation corresponding the language you want to. as abbreviations.
Additional information Appendix B:Country/Area This list is used for the parental 50 Lock operation. code list for parental lock For details, see page 43.
Authorized Service Centers QUALITY JVl¢ ° SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.co m Dear Customer, In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC.com Remember to retain your Bill of Sale for Warranty Service.
•-JVCCOMPANY OF AMERICA warrants this product and all parts thereof except as set forth below ON LYTO THE ORIGINAL PURCHASER AT RETAI E t o be FRI_E FROM DEFECTIVE MATERIALS AN D WORKMANSHIP from i he date _of original retail purchase for the period as shown below: {!!The Wa rranty Period,) THIS LIMITED WARRANTY IS VALID O N LY IN THE FIF_ COMMONWEALTH OF PUERTO (50)U NITED STATES THE DISTRICT OF COLUMBIA so,ice -k. AND • " Such repair and replacement so.
VICTOR COMPANY _EN OF JAPAN, LIMITED O 0102MZMCREJSC
