JVC DVD VIDEO PLAYER XV-S400 BK/XV-S 402 SL XV-S300BK/XV-S302S [] "v= For XV-S400BK/XV-S402SL [] I JVC _w_E_ w_w_c_ _LAY_ For XV-S300BK/XV-S302SL 3_kONIC alLdrPrtlm}l _P_lVlf DIW l I IJklV tkW h|lV|l OIGrrAL (For XV-S400BK/XV-S402SL AUOIO Only) INSTRUCTIONS For Customer Use: Enter below the Model No. and Serial No. which are located on the rear, bottom or side of the cabinet. Retain this information for future reference. Model No.
Warnings, Cautions and Others Mises en garde, precautions et indications diverses CAUTION To reduce the risk of electrical shocks, fire, etc.: 1. Do not remove screws, covers or cabinet. 2. Do not expose this appliance to rain or moisture. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Introduction Table of Contents Page 2 Features ............................................................................... 2 Supplied accessories .......................................................... 2 About this instruction manual .......................................... 3 Notes on handling .............................................................. 4 Page 5 Names of parts and controls ............................................. Front panel .................................................
Features Supplied • Audio/video • Strobe accessories cable (x 1) function The unit can display the TV screen. nine continuous still pictures on ==Digest function • Remote Control Unit (x 1) You can select the desired selection to be played from the opening scenes displayed on the TV screen. • Angle function* You can select a desired angle from multiple angles recorded on the DVD VIDEO disc. • Zoom camera function You can view scenes close-up.
Introduction About this instruction manual • This instruction manual basically explains operations according to the format as below. • For operations for MP3 CD discs, see "MP3 CD playback" on and after page 41. The other sections not refer to MP3 CD playback. You can play titles or tracks order by using the Random The illustration of the remote control unit is for XV-S4OOBK/XV$402SL. Buttons and button locations differ depending on the models. For details, "Remote control unit" on page 6.
Introduction Notes on handling Important Safety precautions cautions Installation of the unit Avoid moisture, water and dust Do not place the unit in moist or dusty places. • Select a place which is level, dry and neither too hot nor too cold (between 5°C and 35°C, 41°F and 95°F). • Leave sufficient distance between the unit and the TV. • Do not use the player in a place subject to vibrations. Avoid high temperatures Do not expose the unit to direct sunlight a heating device.
Names of parts and controls Refer to the corresponding pages indicated in () for details. For XV-S400BK/XV-S402SL _® ® ®®®® 1 OVD/SUPER VOONCD/CD PLAYER lop_ #CLOSE STOP PLAY PAUSE _SKIP_ PAUSE _SK_P_ _ = STA_DSY _TA_DgY_ ® ® For XV-S300BK/XV-S302SL ® ® ®®® 1 DVD/SUPER VCD/VCD/CD PLAYER ±oPE _CLOSE STOP PLAY __ a \\\\\\\ / ® STANDBY/ON (5/I button (23) Turns the unit on or off (standby). STANDBY indicator Lights when the power cord is connected and the unit is on standby.
Preliminary knowledge For XV-S4OOBK/XV-S402SL @ @ @ @ ® @ @ ® ® ® ® ® ® @ @ @ @ PREVIOUS CLEAR F PLAY MODE DIGEST NEXT SELECT SUB TITLE STROBE AUDIO ANGLE THEATER POSITION @ @ @ @ @ ZOOM --AMP VOL+ @ NM-S×V006A REMOTE CONTROL OPEN/CLOSE button (23) Opens and closes the disc tray. Numeric buttons (14, 21) When the "IV - DVD switch is set to DVD, these buttons are used to specify a title, chapter, track or group number.
Preliminary knowledge CHOICE button (45) Displays the preference on-screen display on the TV screen. TV/VlDEO - CANCEL button (21) Switches the TV input mode when the TV - DVD switch is set to TV. I
Preliminary knowledge For XV-S300BK/XV-S302SL ® ( STANDBY/ON_ _/I ) ® ® ® RETURN CANCEL ® @ © @ @ ® ® PREVIOUS CLEAR NEXT SELECT STROBE ® SLOW - ® S PLAY MODE PHONIC SUB TITLE AUDIO DIGEST ANGLE ® @ @ @ THEATER_ POSITION ZOOM @ @ JVC RM-SXV001A REMOTECONTROL The above illustration shows the remote control unit for XV-S300BK/XV-S302SL. However, in this instruction manual, the remote control unit for XV-S400BK/XV-S402SL is used for explanation.
Preliminary knowledge OPEN/CLOSE button (23) Opens and closes the disc tray. Infrared signal-emitting window Point this window toward the remote sensor on the front Numeric buttons (14) Used to select a selection, as well as used to enter a time for the Time search and a chapter number for the Chapter search. panel when pressing buttons. RETURN button (26) Returns to the previous menu (for DVD VIDEONideo CD/ SVCD). TOP MENU button (26) Displays the top menu of a DVD VIDEO disc on the TV screen.
Preliminary knowledge ® EGROUP TITLETRACKCHAP 1 ooooo ooooo ooooo ooooo ooo ooooo ooo ooooo ooooo ooo ooooo ooo ooooo ooooo ooo ooooo ooo ooooo ooooo ooo ooooo ooo ooooo ooooo ooooo ooooo ooooo ooooo 101 ooooo ooooo o o o oOOOO ooooo oOOOO o o o ooooo ooooo ooooo o o o ooooo ooooo oOOOO ODD ooooo ooooo ooooo ooo oOOOo ooooo ooooo oDD ooooo ooooo ooooo ODD ooooO o o o ooooo ooooo o o o ooooo ooooo o o o ooooo ooooo o o o ooooo ooooo ODD ooooo ooooo ooo ooooo ooooo ODD ooOOO ooooo
Preliminary knowledge For XV-S4OOBK/XV-S402SL ® DIGITALOL S-VIDEO COMPONENT AND ®® AND I ® ® ® DIGITAL OUT jack (OPTICAL/COAXIAL) (18) Outputs digital audio signals. Both coaxical and optical connectors are provided. You must select the signal type correctly according to the external device connected to via the Preference display. COMPONENT VIDEO OUT jacks (Y/PB/PR) (17) Output component video signals.
Preliminary knowledge Operational Principles The unit provides several on-screen displays. With some displays, you can set or select preferences functions, while the others are display-only. Opening or displays The Opening conditions. display appears automatically in some Opening display At the bottom, the following information are indicated depending on the unit's status. • NOW READING: The unit is now reading the disc information (TOC).
Preliminary knowledge Play mode displays Pressing the PLAY MODE button brings up the play mode display in which you can control playback functions. Different displays appear depending on the disc type and the unit's status. While stopped During DVD VIDEO playback [ ........... ] I _T During Audio CD/MP3 CD playback I.......... Status displays Pressing the DISPLAY button during playback brings up the status display.
Preliminary knowledge During DVD VIDEO playback, the following meanings. Displayed 0)) : Q : you may see icons displayed at the beginning of a scene recorded from audio languages. Displayed page 36.) at the beginning of a scene recorded with multiple subtitle invalid operation When you press a button, television To select a track/title (See settings icon if the unit does not accept its operation, screen. Operations (See languages.
Preliminary knowledge About discs Playable and non-playable Playable disc types are as follows: discs DVDVIDEO SVCD Video CD VIDEO IDIGITAL VIDEO Audio CD DIGITAL i AUDIO The DVD VIDEO Logo is a trademark. CD-R and CD-RW discs recorded with SVCD, Video CD, Audio CD or MP3 format can be played back, though some may not be played back because of the disc characteristics or recording condition. DVD VIDEO players and DVD discs have their own Region Code numbers.
Connections *In the following description, "TV" may be substituted with "monitor" or "projector." *Before using the unit, you have to connect the unit to a TV and/or amplifier. • Do not connect the AC power cord until all other connections have been made. • Since different components have different terminal names, carefully read the instructions component you are going to connect. You can enjoy using the unit by simply connecting itto a TV. To improve to your separate audio equipment.
Getting started You can enjoy high picture quality by connecting the unit's COMPONENT VIDEO OUT jacks to the COMPONENT VIDEO IN jacks of your TV with the video cables. Note that the COMPONENT VIDEO OUT jacks are not active in the initial (factory preset) condition. See below for details how to make them active. Blue Blue Green --_ Red TV : Red i. For XV-S400BK/XV-S402SL IN White White Audio cable (not supplied) • Connect "Y" to "Y, ....
Getting started You can enjoy high-quality audio by connecting the unit's audio output to your amplifier or receiver. The unit Amplifier or receiver IN LEFT RIGHT AUDIO 1 Audio cable (not supplied) Connect the unit's AUDIO OUT to any line-level inputs (such as AUX, DVD, CD, etc.) of an audio amplifier or receiver. You can enhance the sound quality by connecting either of the unit's DIGITAL OUT jacks (OPTICAL* or COAXIAL) to the digital input of a receiver, CD Recorder, etc.
Getting started When all the audio/video connections have been made, insert the smaller plug of the supplied AC power cord to the unit's AC IN connector, then insert the other end to the wall outlet. Make sure that plugs are inserted firmly. The STANDBY indicator lights and setup is completed. _ Warning • • • • • Disconnect the Disconnect the Disconnect the Do not connect Do not pull the accidents. /_ power cord if you are not going to use the unit for a long time.
Getting started To install batteries in the remote control The battery compartment is located on the back of the remote control unit. 1 Press down on the point shown by the arrow at the top of the compartment and pull up the cover to open the compartment. unit cover, 2 Place the two accessory R6P (SUM-3)/AA(15F) batteries in the remote control according to the polarity markings ("+" and "-') inside the compartment and on the batteries.
Getting started To use the remote control unit for TV operation (For XV-S400BK/XV-S402SL) You can operate your TV from the remote control Setting the remote control signal unit. for operating 4_-2-2, your TV. 1 _:)_ //L_ ---2-1,3-1 N_N 1 Set TV-DVD switch to TV position. 2 Holding down TVNIDEO - CANCEL, enter the manufacturer (0 to 9). Do not release TVNIDEO - CANCEL.
Getting started The following buttons can be used for operating the TV: To use the CURSOR (CH-, CH+, VOL-, VOL+), TVNIDEO - CANCEL and numeric TV - DVD switch to "TV". buttons for TV control, set the TV !_DVD Turns the TV on or off. TV/VIDEO CANCEL TV 1 Switches the TV input mode between TV and VIDEO. TV'/'- TVO MUTING Selects the TV channels directly.
In the following description, the buttons on the remote control unit are mainly used, however, corresponding buttons on the front panel of the unit if available. Turning on/off you may use the the unit For XV-S400BK/XV-S402SL Press DVD STANDBY/ON _)/I on the remote control -{_ TV4 {_ TV_ TV2 TV3 TV5 TV6 TV8 TV9 TV0 MUTING unit or press (_/I on the front panel. O/I,_ DVD STANDBY/ON ............ Oil [ il_'---lJiiliiii"lll ] i _--iiiimiiiW...
Basic operations Basic playback Now you can play a disc. First, let's enjoy simple playback according to the following procedure. For basic operations using a DVD VIDEO, Audio CD, Video CD or SVCD disc with an MP3 CD disc, see pages 41. Press_. The unit starts playback from the begining. NOTES • When the resume point is memorized, pressing of the beginning. See page 25 and 48. _ starts playback • During playback, played.
Basic operations • During playback Press_< or _4. Press _ to locate the beginning next chapter, title, or track. of the current chapter, title, or track, and press _1 to locate the beginning of the NOTE • When you play a Video CD/SVCD disc with the PBC function or a DVD VIDEO disc, the unit may locate a different place, but it will generally locate the beginning of the title, chapter or track. Resuming playback The unit can memorize time you press _.-.
In this section, we describe advanced operations for playback of a DVD VIDEO, Audio CD, Video CD or SVCD disc. For operations with an MP3 CD disc, see pages 41, 42, 43 and 44. NOTE • The illustration of the remote control unit is for XV- S400BK/XV-S402SL. Buttons and button locations differ depending on the models. For details, "Remote control unit" on page 6.
Advanced When "NEXT" or "PREVIOUS" appears on the TV screen, the unit generally works as follows: • Pressing _1 advances to the next page. • Pressing _ returns to the previous page. * The method of the operation is different depending on the disc. operations NOTES • During DVD VIDEO playback, if a menu is shown on the TV screen, the numeric buttons may be used for selecting an item in the menu. • When (_ appears on the TV screen: The title or track you have selected is not contained in the disc.
Advanced operations NOTES • You can also locate a desired chapter directly by specifyingthe chapter number using the numeric buttons during playback (except when a menu is shown). See page 27. If the current title of a DVD VIDEO disc being played is divided into chapters, you can skip to a desired chapter by specifying the chapter number using the on-screen display. • When the chapter number is incorrect in step 3: Overwrite the incorrect number with the correct number.
Advanced 3 Usethe numeric buttons (0 to 9) to enter the time. title Press ENTER. The unit starts playback from the specified for DVD VIDEO) I................... Selected time. I q> IP_PEAT A_REPEAT The time you have selected is not contained on the disc, or the time search function does not work on the disc. Also note that the time search function does not work during Video CD/SVCD playback with the PBCfunction. • To turn off the play mode menu: Press PLAY MODE.
Advanced operations Special picture playback The unit provides special picture playback functions including Frame-by-frame, Strobe, Slow-motion and Zoom. 2 UseCURSORA/v/_/_ to select the desired scene. 1 The selected scene is indicated by [;_>. If there are more than 9 scenes, the digest screen will have more than one page. In this case, pressing advances to the next page, while pressing returns to the previous page. • While paused (still) 1 Press in. Each time you the next frame.
Advanced operations • Pressing I! when the nine still pictures is shown will advance to the next nine still pictures. • Pressing _ when the nine still pictures is shown will advance pictures in normal playback speed. • To cancel strobe play Press and hold II for more than 1 second. 2 NOTE • If you press and hold II for more than 1 second during playback, nine still pictures also appear but they advance in normal playback speed. 1 • During playback or while paused 1 PressZOOM.
Advanced operations Changing the playback order You can play titles or tracks on a disc inserted desired order or in random order. 1 2 3 4 _7 _1 i The programmed number is shown program number. in the 5 6 18 12 title/track under each If you specify a wrong selection Press CANCEL. The last selection erased. You can play titles or tracks on a disc inserted desired order by using the Program function. in the programmed is To clear the program Press •. 4 Press_ to start program play.
Advanced operations Repeat playback You can play titles or tracks on a disc inserted order by using the Random function. in random You can repeat playback of the current selection or all disc contents (except DVD VIDEO). You can also repeat playback of a desired part. ,__ --2 • While stopped ,__ 1 Press PLAY MODE. The play mode menu appears 2 UseCURSOR
Advanced operations Audio CD/Video CD/SVCD for Audio for Video CD) I............. I IRE_T Selected repeat mode REPEAT REPEAT CD/SVCD) #BREPEAT_UES_RCH pBCCALl Selected repeat mode ALL (all track 1 (current No repeat) track repeat) indication (off) ,__ • If you press • in REPEAT ALL or REPEAT1 mode, the unit stops playback but remains in the mode. • If you press • in REPEAT TITLE or REPEAT CHAPTER mode, the unit stops playback and quits the mode. • • During 1 Press PLAY MODE.
Advanced • operations To quit A-B repeat playback Press •. The unit stops playback and quits A-B repeat mode. • During playback, pressing ENTER when _ is pointed at [AB REPEAT] quits A-B repeat mode and continues playback. • You can also quit A-B repeat mode by pressing I<< or I_,d. NOTES Selecting a scene angle of DVD VIDEO You can enjoy a variety of scene angles if the DVD VIDEO disc contains "multi-angle" parts, where multiple cameras were used to shoot the same scene from different angles.
Advanced operations Changing the language and sound rn TV, TW For DVD VIDEO discs, you can select the subtitle language, as well as the audio language/sound included on a disc. For Video CD/SVCD discs, you can select the audio channel(s). D TW ,_ ,_ -2 -2 Tv, ,_ Tv2 Tv3 ,_ XV-S4OOBK /XV-S402SL • During XV-S3OOBK /XV-S302SL --3 DVD VIDEO playback 1 Press and hold ANGLE for more than 1 If 2 '-- second. Up to nine camera angles recorded on a disc appear on the TV screen.
Advanced operations For SVCD Pressing CURSOR
Advanced operations Selecting character the picture Enjoying sound You can select the picture character from among four options according to the source program, lighting condition of the room and/or personal preference. virtual surround Using the 3D PHONIC function, you can get a simulated surround effect from your stereo system. o _R_vl_s _Ex_ E_3 2 _,o 1 2 ° co JV8 _M-S×VOO6A • During RM_×VOO1A XV-S4OOBK /XV-S402SL playback 1 PressTHEATERPOSITION.
Advanced operations THEATER You can enjoy sound effects like in a major theater Hollywood. in When you play a DVD VIDEO disc recorded in Dolby Digital which contains more than 3 channels, ACTION does not appear. Checking the status You can view the disc/time information, DVD functions status on the TV screen. as well as the NOTES • The 3D Phonic display will automatically disappear if you do not change the 3D PHONIC for 5 seconds. • To turn off the 3D PHONIC display manually, press ENTER.
Advanced operations To dim the brightness of the display window You can dim the brightness Tv, TV2 of the display window. TV3 CZ3_ CZ;3 _ _ CZ3 CZ3 _ -1 • During DVD VIDEO playback E_3 E_3 1 Press DISPLAY. The DVD function screen. status display appears on the TV ,m ENGLISH ENGL ,m SH XV-S4OOBK /XV-S402SL XV-S3OOBK /XV-S302SL • When no disc is inserted or while stopped The current selections of the camera angle, audio language and subtitle language are shown.
This unit can palyback CD discs recorded by the MP3 format (we refer to those discs as MP3 CD discs in this manual). Operations for MP3 CD discs are similar to those for Audio CD discs, though there are some restrictions and differences. What is MP3? MP3 is the abbreviation of "MPEG1 Audio Layer 3". MPEG Audio is a compression specification that compresses the audio portion only. This image compression method is used in DVD or Video CD, etc. The audio data has been compressed into about 1/10.
MP3 CD playback Buttons 1 Holding down the +10 button for 2 secondsor more. Functions Starts playback Stops playback "- - -" appears in the display window showing that you can now enter a three-figure number directly. completely II Pauses playback P<
MP3 CD playback 3 Specify the groups in the desired order using the numeric buttons. See page 14 for details about how to use the numeric buttons. Up to 18 groups can be programmed. You may select the same group more than once. 1 2 3 i i ........... i.... 4 5 6 11 12 You can playback order. Groups on an MP3 CD disc in random ,__ ] --2 The programmed group number is shown under each program number. ,__ • If you specify a wrong selection Press CANCEL. The last selection erased.
MP3 CD playback You can repeat playback Groups. of the current Group or all ,__ • During playback • During playback 1 Press DISPLAY. or while stopped The disc/time 1 Press PLAY MODE. The play mode menu appears on the TV screen. I • (off) • If you press • in REPEATALL or REPEAT1mode, the unit stops playback but remains in the mode. • To quit repeat playback With _ pointed at [REPEAT], press ENTER repeatedly until the mode is set to off.
3 PressCURSOR_/_ to select the setting you Selecting preferences want. • To turn offthe You can set various dedicated displays. preferences for playback via four move _ preference display, press CHOICE or to [EXIT] and press ENTER. • For details about each setting, paragraphs: see the following Note that you cannot bring up a preference display during playback or when an Audio CD is loaded in the tray.
Initial settings SUBTITLE You can select the default subtitle language displayed if it is contained on the disc. to be DIGITAL Each time you press CURSOR _,-,the language setting changes in the following order: AUDIO MENU AUDIO pLAy LANGUAGE LANGUAGE SUBrm_ ONSCR_A__ I pRESS < Ib KEY I • ENGLISH -_ SPANISH -_ FRENCH -_ CHINESE -_ GERMAN -_ ITALIAN -_ JAPANESE -_ language code from AA to ZU (See "Appendix A: Table of languages and their abbreviations" at the end of this manual.
Initial settings DOWN MIX To playback a DVD VIDEO disc recorded with surround ........... MONITOR D_rrALAUDIO_ multichannel audio _o..... correctly, the DOWN MIX setting must be properly made according to your ["_"_ ] audio system. Note that this setting affects the output signal from the AUDIO (both DIGITAL and ANALOG) output jacks when playing back a DVD VIDEO disc recorded with surround multichannel audio.
Initial settings ON SCREEN GUIDE The unit can display "on-screen guide" icons or characters on the picture, which show what is happening unit. . L_G AUtO SYSTEM MONrrOst TYpE SCRE_SAV_ AUTO STANDBY XV-S400BK/XV-S402SL) ON SCRIEEN GUIDE to the disc or the When the unit is stopped for more than 30 minutes or 60 minutes, the unit enters standby mode automatically. ON • The on-screen guide will be displayed. OFF Time is set to 60 minutes. • The on-screen guide will not be displayed.
Initial settings 4 While _ points [Set Level], use CURSOR
Initial settings 4To changethe set level, use CURSOR
Initial settings When you set the parental level strictly, some discs may not be played back at all. When you insert such a disc and try to play it, the following Parental Lock on-screen display appears on the TV screen, asking you whether you want the parental lock to be temporarily released or not. 1 Usethe CURSORA/v to move_ then press ENTER. moves to the PASSWORD field. When selecting [NO], press OPEN/CLOSE to remove the disc. to [YES], i_mv( iP_mha_nge ? pAsswo.
AV COMPU LINK remote control system For XV-S4OOBK/XV-S402SL The JVC AV COMPU LINK system allows you to enjoy video or audio with the simplest operation.
Additional information IMPORTANT! When you connect the component video output to your TV: • Set the DVD player's AV COMPULINK setting to DVD1. • Make the video/audio connection between the DVD player and your receiver make the S-VIDEO connection. using the supplied audio/video cable, and do not Notes for connection • If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions may not be performed automatically.
Additional information Care and handling of discs How to handle discs When handling a disc, do not touch the surface of the disc. Since discs are made of plastic, they are easily damaged. If a disc gets dirty, dusty, scratched or warped, the images and sound will not be picked up correctly, and such a disc may cause the player to malfunction. Label side Do not damage the label side, stick paper to or use any adhesive on its surface. Storage Make sure that discs are kept in their cases.
Additional information Troubleshooting What appears to be a malfunction service. may not always be serious. Symptom Possible Power does not come on. Power plug is not inserted case Too far from the following list before requesting Remedy securely. Plug in securely. the unit. The tip of the remote the right direction. Remote control Please go through More closer to the unit. unit is not pointed in Point the infrared light- emitting window toward the remote sensor on the front panel.
Additional information Specifications General Readable discs: Video format: DVD VIDEO, Audio CD, Video CD, SVCD, MP3 CD NTSC Other Power requirements: Power consumption: Mass: Dimensions (W x H x D): Video AC120V tk_,60Hz 14 W (POWER ON), 1.2 W (STANDBY mode) 2.4 kg (5.35 Ibs) 435 mm x 68 mm x 271 mm (17-3/16 inch x 2-11/16 inch x 10-21/32 inch) output COMPONENT (pin jacks): VIDEO OUT (pin jack): S-VIDEO OUT (S jack): Horizontal resolution: Y Output: PB/PROutput: 1.
Additional Appendix A:Table of languages and their abbreviations When you select the subtitle language or sound, the languages shown below are displayed the desired language, select the abbreviation corresponding the language you want to. as abbreviations.
Additional information Appendix B:Country/Area This list is used for the parental 58 Lock operation. code list for parental lock For details, see page 49.
Authorized Service Centers QUALITY JVl¢ ° SERVICE HOW TO LOCATE YOUR JVC SERVICE CENTER TOLL FREE: 1 (800) 537-5722 http://www.jvc.co m Dear Customer, In order to receive the most satisfaction from your purchase,please read the instruction booklet before operating the unit.In the event that repairs are necessary, please call 1 (800)537-5722 for your nearest authorized servicer or visit our website at www.JVC.com Remember to retain your Bill of Sale for Warranty Service.
•-JVCCOMPANY OF AMERICA warrants this product and all parts thereof except as set forth below ON LYTO THE ORIGINAL PURCHASER AT RETAI E t o be FRI_E FROM DEFECTIVE MATERIALS AN D WORKMANSHIP from i he date _of original retail purchase for the period as shown below: {!!The Warranty Period,) THIS LIMITED WARRANTY IS VALID O N LY IN THE FIF_ COMMONWEALTH OF PUERTO (50)U NITED STATES THE DISTRICT OF COLUMBIA so,ice -k. AND • " Such repair and replacement so.
VICTOR COMPANY _EN OF JAPAN, LIMITED O 0102MZMCREJSC
