Manual

Basic operations

7 Press ENTER.

The pull-down menu of the "DIGITAL AUDIO

OUTPUT" appears.

I ..... lu'ot.',%.....

DIGITAL AUDIO OUTPUT selection

UseA/_, to selecta desireddigital output

signal type.

You must set this item correctly when you connect

the unit to an external surround decoder or D/A

convertor (including an amplifier/receiver with

built-in surround decoder or D/A convertor).

(If you do not connect the unit to such a device, you

do not have to set this item.)

When connecting with a Dolby Digital decoder,

select "DOLBY DIG ITAL/PCM ."

When connecting with a DTS or MPEG

M ultichannel decoder, select "STREAM/PCM."

When connecting with other digital devices,

select "PCM ONLY."

See page 60 for details.

Press ENTER.

The TV screen returns to show the opening display.

NOTES

• This setting may not be necessary except when turning

on the power after purchasing the unit.

• You can also set these items, as well as other

preferences, by pressing CHOICE briefly to bring up the

preference display. See "Changing the initial settings"

on and after page 56 for details.