Manual

Changing the initial settings
1 Use-/v to move _ to [DELAY]and press
ENTER.
The DELAY display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 56 for details about how to bring up the
"SPK.SEI-FING" page.
2
3
4
iiiiiiiiiiiiiiiiiiiiiiiiiiiii ii iii iiiiii i/iiiiiiiii
iiiiiiiiiiiiiii ii iiiiiiiiiiii
Use,=/T to selectthe speakerto
press ENTER.
CENTER SPEAKER:Center speaker
REAR SPEAKER: Rear speakers
be set and
Use,=/T to selectthe delaytime and press
ENTER.
When you select "CENTER SPEAKER," you can
select the delay time from "O.Om/Oft" to
"l.5m/5ft" in lft units.
When you select "REAR SPEAKER," you can select
the delay time from "O.Om/Oft" to "4.5m/15ft" in 1ft
units.
Repeatsteps2 and3 if you set other
speakers.
To return to the "SPK. SEI-rlNG" page
Use A/V to move _ to [RETURN] and press ENTER.
NOTE
• For the speaker{s) whose size is set to "NONE," the
delay time cannot be set.
You can adjust the output level of each speaker.
Usei/_, to move _ to [LEVEL]and press
ENTER.
The LEVEL display page appears on the TV screen.
points to [CENTER SPEAKER].
See page 56 for details about how to bring up the
"SPK.SEI-FING" page.
............_i_i_i_i_i_iiiilililililililililililililiiii_i_ili_i_,i_,!ii_i_i__ ,_i__i_i_i
2 Use,=/_ to selectthe speakerto be set and
press ENTER.
FRONT SPEAKER: Front speakers (This item
cannot be selected. The level is
fixed to 0riB.)
CENTER SPEAKER: Center speaker
REAR SPEAKER: Rear speakers
SUB WOOFER: Subwoofer speaker
3
4
Use,=/_ to set the levelandpress ENTER.
When you select "CENTER SPEAKER," "REAR
SPEAKER" or "SUB WOOFER," you can select the
level from -6 to 6dB in 1dB units.
Repeatsteps2 and 3 if you set other
speakers.
To return to the "SPK.SEI-rlNG" page
Use A/V to move _ to [RETURN] and press ENTER.
NOTE
• For the speaker{s) whose size is set to "NONE," the
speaker level cannot be set.
To generate test tone signals
You can check the level setting by monitoring the test
tone.
1 Use-/v to select [TESTTONE]and press
ENTER.
2 UseA/_, to select [ON] and pressENTER.
The test tone will be generated when you select the
speaker(s) in the "LEVEL"display.
I While the "SPK.SEI-FING" page of the preference
display is shown
65