System Instruction
Setup
94
AV Setup
You can set AV parameters.
1
Press the [MENU]/[ ] button.
h Popup menu appears.
2
Touch [SETUP].
h SETUP screen appears.
3
Touch [AV].
h AV screen appears.
4
Set each parameter as follows.
[Android Auto Device Select]
(DNX996XR / DNR876S)
Select the device to be used in the Android
Auto mode. (P.38)
[Apple CarPlay Device List]
(DNX996XR / DNR876S)
Select the device to be used in the Apple
CarPlay mode. (P.36)
[Speech Quality Adjust]
Adjust the speech quality.
[Microphone Level] : Adjust the level of
microphone gain. Default is “0”.
[Echo Cancel Level] : Adjust the level of
echo cancellation. Default is “0”.
[Noise Reduction Level] : Reduce the noise
generated in the surrounding environment
without changing the microphone volume.
Use this function when the voice of caller is
not clear. Default is “0”.
[AV-OUT]
You can select an AV source to be output
from the AV OUTPUT port.
OFF, AV-IN, DISC (DNX996XR / DNX696S /
DNX576S only), USB, SD, or iPod
• You cannot select AV-IN if the AV-IN input
terminal is used for camera.
• You cannot select iPod if it is connected via
Bluetooth.
• If you select USB, SD, iPod, DISC (Music CD/
Disc media), Spotify, Pandora or Bluetooth
audio as the main source, you cannot
select USB, SD or iPod as the AV output
source.
• If you select Wireless Mirroring, Apple
CarPlay or Android Auto as the main
source, you cannot select DISC (Music CD/
Disc media), USB, SD or iPod as the AV
output source.
[Driving Position]
Select the driving position (left or right).
“Left” (Default)/“Right”
[Wi-Fi SETUP] (DNX996XR / DNR876S)
You can change the device name and display
the device address, password. See Change
the device name (P.94).
[OEM SETUP]
Confirm the information about or change
the settings for using the ADS adapter.
Ñ Change the device name
1
Touch [Wi-Fi SETUP] on the AV screen.
2
Touch [Device Name].
h Change Device Name screen appears.
3
Touch and hold [ ].
4
Input the device name.
5
Touch [Enter].