PA1540B 15" SUPER WOOFER WITH BLUETOOTH, USD/SD, FM PLL RADIO, ACTIVE AMPLIFIER, LED DISPLAY, REMOTE CONTROL AND 3-WAY POWER SOURCE USER MANUAL
WARNING ! WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER THIS SPEAKER. NO ADJUSTMENTS INSIDE FOR YOU. ALL SERVICES MUST BE SUBMITTED TO QUALIFIED PARTY. The symbol represented by a ray with arrowhead within an equilateral triangle is intended to alert the user to the presence of dangerous voltage within the unit that may be of sufficient magnitude to constitute a risk of electric shock people magnitude.
REAR PANEL 13 12 14 22 9 10 11 FULL BATT 1 ANTENNA 2 3 - + 15 4 DC AC 5 16 17 DC 12V IN POWER 6 MIC INPUT 7 AUX INPUT 1819 8 21 AC 100-240V~50/60Hz 2 20
1. When the unit is fully charged, the LED will lights up solid in green. 2. Master Level Volume Control: Turn this knob to adjust the master volume. 3. Power & Bluetooth Indicator: The power indicator will light up solid when the unit is ON or under charging when unit was set off. Bluetooth indicator will light up solid when connected or flash slowly in BT playback, and it flashes quickly when pairing. 4. Treble adjustment: Turn this knob to increase the treble. 5.
16. Power button: There are three possible settings. Setting the unit to DC (BATT) will allow the unit to play using only internal battery. When set to AC, the unit can also be powered by an external power supply (electrical outlet) even if the battery is dead. *In AC setting the unit will still under charging, but it will do very slowly. To charge the unit properly, set the unit to OFF. 17.DC 12V IN is for connecting to 12V external battery if needed.
9. EQ: Press this button to select the different EQ mode for USB/SD. 10.PREVIOUS/NEXT Folder Button: Press this button to move to the previous/next folder on USB/SD drive. 11. SCAN, PAIR, REPEAT & PLAY/PAUSE button: Press this button to play or pause the track of USB/SD/Bluetooth/FM. When on Bluetooth mode, hold it will disconnect the pairing. Hold it to auto scan in FM. Hold it to select the repeat modes for USB/SD. Which is equivalent to the play/pause key (13) on the main unit’s rear panel.
DIGITAL DISPLAY USb Sd INPUT MODES: The LED display screen will display the information of input modes for USB/SD/LINE(AUX)/FM/Bluetooth. 1. When a USB flash drive/SD card is inserted into the USB/SD input, the unit will automatically switch to USB/SD mode and the display shows USb or Sd. EQ Mode: EQ modes will display here, Pop, Rock, Jazz, Classic, Normal for USB/SD.
PAIRING A BLUETOOTH DEVICE 1. Turn on you Bluetooth device. 2. Turn on the speaker to Bluetooth. the unit will automatically go into pairing mode to search for Bluetooth device. You will know you are in pairing mode when the LED is flash quickly. 3. If your Bluetooth device is not able to pair to the unit, disconnect the unit's previous Bluetooth connections and reset the Bluetooth module by holding play key. 4. Navigate to your Bluetooth device's setup screen, find "PA1540B" and connect. 5.
CONTROL REMOTO SPECIFICATION GENERAL POWER REQUIREMENT: AC100-240V~50/60Hz REMOTE CONTROL: DC 3V 1.5V UM4/AAAX2PCS POWER CONSUMPTION: AC 30W FM FREQUENCY: 87.5-108MHz GROSS WEIGHT: 14.6KG DIMENSIONS: 49.0cm(L) x40.0cm(W) x 75.0cm(H) AUDIO SECTION Output Power..................................... 30W (RMS) ACCESSORIES Speaker Box (Unit)........................... .................1 Remote Control (UM4 Battery x2pcs).................1 Wired Microphone............................................ ..
.. .. . .. .. CAUTION: The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as waves, shall be placed on the apparatus. Minimum distances 30 cm around the apparatus for sufficient ventilation. The ventilation should not be impeded by covering the ventilation. Opening with items, such as newspapers, table-cloths,curtains,etc. No naked flame sources, such as lighted candles, should be placed on the apparatus.
