Headset with Bluetooth® Wireless Technology Instruction Manual JB-TH220 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit http://www.jWIN.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal. The materials are recyclable as mentioned in its marking.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 USER SAFETY GUIDE Important Safety Instructions-Continued sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 7. Power sources – The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 8. Cleaning – The appliance should be cleaned with a dry cloth. 9.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 USER SAFETY GUIDE FCC Notice (USA)-Continued communications, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 USER SAFETY GUIDE Additional Safety Instructions • • When not in use, keep your device in a safe place where it will not be bent or crushed. Keep this device away from children. Some small and detachable parts might be swallowed by children and result in harm to them.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 USER SAFETY GUIDE IMPORTANT NOTES ON HEARING Your hearing is very important to you and to us. We strongly recommend you to follow the guideline below in order to prevent possible damage to or loss of hearing. Hearing experts caution that listening to loud sounds can damage hearing over time. With continuous listening to loud sounds, hearing adapts and will give the impression that volume has reduced. What seems normal may, in fact, be harmful.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 TABLE OF CONTENTS GETTING STARTED Introduction. …..………..……………………………………… What’s Included in the Package…………………………..… What is Bluetooth wireless technology? ............................. Location of Controls…………………………………………… Charging the Headset………………………………………… Turning on the Headset………………………………………. Turning off the Headset………………………………………. Pairing the Headset using Bluetooth Wireless Technology.
Headset w/ Bluetooth technology -7- V10M10_IM_EN_08032007 www.jWIN.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 GETTING STARTED Headset with Bluetooth Wireless Technology Thank you for purchasing the JB-TH220. This headset has been designed wireless mobile phone connection using Bluetooth wireless technology. Please keep this manual in a safe place for future reference.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 GETTING STARTED What is Bluetooth wireless technology? Bluetooth wireless technology is a short-range wireless communication technology intended to replace the cables connecting electronic devices while maintaining the high level of security.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 GETTING STARTED LOCATION OF CONTROLS 1. Multi-function button 2. Volume +/- button 3. Microphone 4. Charging port 5. Ear clip 6. Earpiece/receiver 7. LED indicator Charging the Headset Fully charge the headset by connecting the charger to the mini-USB port on the top of the headset. The red indicator will light up when charging. Once fully charged, the red indicator will go out. TOP - 10 - www.jWIN.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 GETTING STARTED Turning on the Headset Press and hold the Multi-function button for approximately three (3) seconds until the blue indicator light begins flashing. Note: The blue indicator will continuously flash when the power is on. Turning off the Headset Press and hold the Multi-function button for approximately five (5) seconds until the red indicator flashes briefly. Note: No light will flash when the power is off. - 11 - www.jWIN.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 GETTING STARTED Pairing the headset with mobile phones using Bluetooth wireless technology 1. With the power turned off, press and hold the Multi-function button for approximately 3 to 5 seconds. Blue and Red lights will blink alternatively. 2. Set both the JB-TH220 and the mobile phone to SEARCH mode following the pairing instructions included with the phone, placing both units close together.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 GETTING STARTED Notes on Pairing This headset will not be recognized by your mobile phone unless it is properly paired. The JB-TH220 cannot pair with mobile phones which are not equipped with Bluetooth wireless technology. To ensure that correct pairing is accomplished, it is important to follow both these instructions and those which accompany the corresponding mobile phone.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 OPERATING INSTRUCTIONS Making a Call This headset must also be paired with your phone, enabled by Bluetooth wireless technology in order to make a call. 1. Normal dialing: a. Dial the telephone number on your mobile phone. b. When the call connects, it will be heard through the headset. 2. Last number redial: After a call has been made, the number can be redialed by short-pressing the Multi-function button two (2) times. 3.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 OPERATING INSTRUCTIONS Answering a Call Be certain the headset is properly paired with a mobile phone featuring Bluetooth wireless technology before answering a call. 1. An incoming phone call will be indicated by a ring. Press the Multi-function button once to answer the call. 2. If the headset is off when there is an incoming call, press the Multi-function button to turn on the headset and answer the call as usual.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 OPERATING INSTRUCTIONS Rejecting an Incoming Call When there is an incoming call, press and hold the Multifunction button for approximately 3 to 5 seconds and release to reject the call. Transferring Calls between Devices 1. To transfer a current call to your mobile phone when using the JB-TH220, press the Multi-function button for three (3) seconds. The call will no longer be communicated through the JB-TH220. Use your mobile phone as normal. 2.
Headset w/ Bluetooth technology V10M10_IM_EN_08032007 TROUBLESHOOTING GUIDE 1. The headset does not work with my mobile phone. Be certain that your mobile phone is equipped with Bluetooth wireless technology. This headset will only work with such mobile phones. Additionally, your mobile phone must be paired with the headset BEFORE all other pairing. 2. There is interference on the headset with my phone. The maximum distance for Bluetooth wireless communication is 33 feet (10 meters).
Headset w/ Bluetooth technology - 18 - V10M10_IM_EN_08032007 www.jWIN.
TEL: 516-626-7188 FAX: 516-626-7105 website: www.jWIN.com © 2007 jWIN Electronics Corp. All rights reserved. The Bluetooth word mark and logos are owned by Bluetooth SIG, Inc. and any use of such marks by jWIN Electronics Corp. is under license. No portion of this printed material or product enclosed herewith including design, shape and graphics, may be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp.
