R JD-VD503 SR
For attention of parents: In order to avoid the situation that you forget the parental lock code and can not enter into the operation of parental lock setting, here we offer you the super secret code: 1369. You may use this code to enter into the operation of parental setting. To prevent the young children from knowing this secret code, please tear the note from this user's manual and keep in secret place. Thanks.
R Thanks for purchasing the jWIN DVD player. Before operating this player, please read this manual and retain it for future reference. SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
R CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH THE WIDE BLADE OF THE PLUG TO THE WIDE SLOT, AND FULLY INSERT. This DVD player employs a laser system. CAUTION: Use of controls, adjustments or the performance of procedures other than those specified may result in hazardous radiation exposure. To prevent direct exposure to laser beam, do not try to open the enclosure. DO NOT STARE INTO BEAM.
R IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ THESE INSTRUCTIONS AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE. PLEASE HEED ALL WARNINGS AND FOLLOW ALL INSTRUCTIONS. This set has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this unit will protect you if you observe the following procedures for installation, use and servicing.
R 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
R Notes on Handling When shipping the DVD player, the original shipping carton and packing materials come in handy . For maximum protection, repack the unit as it was originally packed at the factory. Do not use volatile liquids, such as insect spray, near the DVD player. Do not leave rubber or plastic products in contact with the DVD player for a long time. They will leave marks on the finish. The top and rear panels of the DVD player may become warm after a long period of use. This is not a malfunction.
R Points For Attention Warning: To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. Dangerous high-voltage parts and Laser are present inside the enclosure. Do not open the cabinet. Refer servicing to qualified personnel only. Precautions on Use: DVD players are high-end electric appliances, in which large-scale integrated circuits and precise laser devices are incorporated.
R TABLE OF CONTENTS SAFETY PRECAUTIONS - - - - - - - - - - - - - - - - - - - - 1-2 IMPORTANT SAFETY INSTRUCTIONS - - - - - - - - - 3-6 Operating Interface - - - - - - - - - - - - - - - - - - - - - - - - 8-10 Front Panel Back Panel Ports Remote Control Unit VFD Display How to Use Programming Function - - - - - - - - - - - - - - -32 Programmed Play for SVCD, VCD and CD Discs Programmed Play for DVD Disc Supported Disc Formats- - - - - - - - - - - - - - - - - - - - - - - 10 How to Use Search Function- -
R 1. OPERATING INTERFACE FRONT PANEL: 1. Disc Tray 2. OPEN/CLOSE Button 3. PLAY Button 4. PAUSE Button 5. STOP Button 6. STANDBY Button 7. RETURN Button 8. AUDIO Button 9. POWER Button 10. Remote Control Signal Sensor 11. MIC Volume Control Knob 12. ECHO Control 13. MIC Jack1 14. MIC Jack2 15. MIC Cover BACK PANEL PORTS: VIDEO S-VIDEO COMPONENT VIDEO OUT 5.
R REMOTE CONTROL: 1.POWER ON/STANDBY button 2.NTSC/PAL button 3.RECALL button 4.NUMBER button 5.STOP button 6.ZOOM button 7.PLAY button 8.PAUSE button 9.UP button 10.LEFT button 11.DOWN button 12.MENU (PBC) button 13.VOLUME control (-) 14.PREV. button 15.NEXT button 16.TITLE button 17. SLOW MOTION button 18. RETURN button 19. SUBTITLE button 20. OPEN/CLOSE button 21. SPECTRUM button 22. PROGRESSIVE button 23. CLEAR button 24. SEARCH button 25. 3D 26. AUDIO button 27. SETUP button 28. RIGHT button 29.
R VFD DISPLAY: When playing discs, VFD will be as follows. <1> Disc Format Display <2> Title Display <3> Chapter/Track Display <4> Playing Display <5> Repeat Display <6> Pause Display <7> Hour Display <8> Minute Display <9> Second Display 2.
R 3. REFERENCE GUIDE On playing DVD discs On playing Picture CD discs On playing Super VCD discs On playing VCD discs On playing DVCD discs On playing CD discs On playing MP3 discs On playing WMA discs 4. PREPARATION BEFORE PLAYING 4.1 BATTERY INSTALLATION FOR REMOTE CONTROL Open the battery compartment lid and insert a pair of AAA batteries with correct polarity as indicated. Please point at the remote sensor on the player while using the remote control. 4.2 SYSTEM CONNECTION 1.
R Connect with TV 1. Normal connection Use the YUV cords to connect the player with the corresponding ports of the TV set as shown in the picture on the right . VIDEO 2.Connect with S-Terminal Connect one end of S-Terminal wire with S-Terminal output socket on this player back-panel and another with the S-Terminal input socket of the TV, and then connect audio wire with the TV. S-VIDEO COMPONENT VIDEO OUT 5.1CH SURROUND AUDIO OUT OPTICAL COAXIAL MIXED AUDIO OUT 3.
R Connect with AV power amplifier 1. Normal Connection The connection method is illustrated in the picture. 2. Connect with AV Amplifier with 5.1 Channel Surround Audio Input.
R 3. Connect with Optical-Digital Audio Terminal or Coaxial Terminal. Directly connect the optical or coaxial cord of the amplifier with optical or coaxial terminal of this player (this factory setting mode is SPDIF-PCM ), then connect video terminal of the player with video interface of TV. When using optical or coaxial output function of this player, please refer to 7.2 Audio setting up for the detailed setup method. 4.
R Turn on the player 1.Press the " POWER " button to switch on the power then it will load disc as illustrated at right. LOADING Loading Note: Turn the volume of amplifier to the minimum. If this player has been connected with the amplifier, then turn the amplifier power on and switch input channel to DVD.
R 3. Place a disc into the disc tray and then press the " OPEN/ CLOSE " button on the remote control or on the player to close the disc tray. The player can automatically discern different kinds of discs, and disc information may be displayed in the left upper corner of TV screen. Type of disc DVD OPEN/CLOSE OPEN/CLOSE Note:The disc tray shall be opened/ closed by pressing the OPEN/CLOSE button after power on. Do not push or pull the tray by force so as to avoid damage to the appliance. 4.
R 2. STOP PRESS PLAY KEY TO CONTINUE Press "STOP" once, the player enters memory-stop state; press again, the player will completely stop. STATE OF MEMORY STOP 3. PREV (Track or Page) 4. NEXT (Track or Page) Note: Some discs do not support the functions described in item 3 and 4 above. 5.
R 6. RETURN RETURN Back RETURN 5.2 NTSC/PAL SYSTEM Continuously press NTSC/PAL on the remote control to switch the following systems. Adjust the disc player output mode to match the TV system , either: MULTI NTSC PAL Note: 1. This player has the function of automatically discerning the format, and defaults to the NTSC system. If playing discs in NTSC format, the player can automatically switch to NTSC system. At this time, it is normal that the picture will be instantly flashed. 2.
R 5.3 MUTE & VOLUME CONTROL Press "MUTE" button on the remote control to turn off sound and press again to turn on the sound. "+" button is volume control button. Press "+" to increase volume and "-" to decrease volume. MUTE Decrease volume Increase volume Note: Volume control is invalid for coaxial and optical output. 5.4 TRACKS SELECTION There are many titles including many chapters in DVD VIDEO/DVD AUDIO discs, while Super VCD, VCD and CD are only divided into tracks.
R For VCD, press this button to select different audio channels as follows: STEREO MONO LEFT MONO RIGHT mix-MONO PARTNER LEFT PARTNER RIGHT SUBTITLE 01/03:ENGLISH 5.6 SUBTITLE SELECTION Press SUBTITLE on the remote control to choose different subtitles (There are at most 32 kinds of subtitles for DVD and 4 kinds for Super VCD, this function only works with discs that have multiple subtitles). SUBTITLE 02/03: ENGLISH SUBTITLE 6. OTHER FUNCTION BUTTONS 6.
R 6.2 PAUSE In play state, press PAUSE for the first time and the player will be in pause state. Press the button again, and the player will be in STEP state. Each time the button is pressed, the picture on the Screen will move to the next frame. Continuously press the button, the picture on the screen will keep moving forward. Pressing "PLAY" will return to normal play mode. Note: The step function doesn't work with CD, MP3, WMA, Picture CD, DVD AUDIO discs. 6.
R 6.4 SLOW MOTION In the play state, continuously press the " SLOW " button and you will get the following state and information on the screen : slow forward 1/2, 1/4, 1/8, 1/16. Notes: 1) This function doesn't work with CD, MP3,WMA, Picture CD discs. 2) DVD disc is compatible with the function of slow motion. 6.
R IN SVCD, VCD &CD DISCS PLAYING MODE: Press "REPEAT" once to repeat one track. When the track is over, the player will repeat it automatically. Press "REPEAT" twice to repeat the entire disc. When the whole disc is over, the player will repeat it automatically. Note: For SVCD, DVCD and VCD discs, the repeat function must be used under the PBC off state. TRACK ALL IN WMA & MP3 DISCS PLAYING MODE: MENU Press "REPEAT" once during play to repeat one track.
R 6.10 TITLE (applicable only to DVD) Press TITLE to play the desired title. (Only applicable to the discs with this function) 6.11 DIRECTION & ENTER These buttons are used to move the highlighted bar or cursor to desired items. Press "ENTER" to confirm. ENTER 6.12 ANGLE Press ANGLE to watch the same scene from different angles when enjoying sports, musical or drama programs. Note: Only applicable to discs with this function. 6.
R 6.15 SCREEN DISPLAY When DVD player is playing DVD disc, continuously press the "OSD" button, the screen display is as follows in turn: play time, remaining time of the title, chapter time, remaining time of the chapter, and display off. When SVCD, VCD, CD disc is being played, continuously press the "OSD" button, the screen display is as follows in turn: track time, remaining time of the track, time of the whole disc, remaining time of the whole disc, and display off.
R 7. HOW TO SETUP SYSTEM Basic Operation * Press the " SETUP " button on the remote control to enter the main page of the SETUP menu. And the TV screen displays as shown in the picture on the right: * Press the arrow keys " ", " ", " ", " " to select or adjust, and press " ENTER " to confirm. * Select " EXIT THE SETUP MENU " , or press the "SETUP" button again to exit from the setup interface. SETUP MENU--MAIN PAGE GENERAL SETUP AUDIO SETUP VIDEO SETUP PASSWORD SETUP PREFERENCE SETUP EXIT SETUP 7.
R 7.1.5 Menu Type " Type 1 " and " Type 2 " are two different kinds of display menus, which can be set according to your preference. 7.1.6 Main Page If this item is selected, the menu will return to the main page of the SETUP menu. 7.2 AUDIO SETUP --AUDIO SETUP PAGE-- Use arrow keys to select the " AUDIO SETUP " item, and press " ENTER " to enter the menu.
R 7.2.1.6 Dialogue --SPEAKER SETUP PAGE-- It is used for enhancing the definition of dialogue. When the audio channel mode is 5.1 CH, it doesn't have such a function. 7.2.1.7 Back DOWNMIX FRONT SPEAKER CNTR SPEAKER REAR SPEAKER SUB WOOFER DIALOG STEREO 5.1CH BACK Select this item to return to the higher menu. 7.2.2 SPDIF Setup When this item is selected, the TV menu screen display is as shown in the picture at right: --SPDIF SETUP PAGE-SPDIF OUTPUT LPCM OUT SPDIF OFF SPDIF/RAW SPDIF-PCM BACK 7.
R 7.2.3.2 Back Selecting this item to return to the higher menu. 7.2.4 Equalizer Setup Selecting this item, the TV screen display is as shown in the picture at right: --EQUALIZER PAGE-EQ TYPE BASS BOOST SUPER BASS 7.2.4.1 EQ Type Press arrow keys to select the sound field effect from the 8 main kinds, i.e. Off, Concert, Living Room, Hall, Bathroom, Cave, Arena and Church. Press "ENTER" to confirm. 7.2.4.2 Bass Boost Selecting " ON " , the bass will be boosted.
R 7.3 VIDEO SETUP After entering Video Setup mode, the TV screen display is: --VIDEO SETUP PAGE-INTERLACE COMPONENT P-SCAN QUALITY RGB MAIN PAGE 7.3.1 Component Video When the player is connected with a TV set with terminal or computer display, RGB shall be selected. When the player is connected with a progressive TV set, P-SCAN mode shall be selected. If the TV set is a common one, INTERLACE mode shall be selected. 7.3.
R 7.4.2 Age Control If you set password in 7.4.1, you will input the password when confirming the age control option. 7.4.3 Main page Select Main page to return to the main page. 7.5 PREFERENCE SETUP PAGE After the appliance is turned on, press the " OPEN/ CLOSE " button to open the disc tray, or press " STOP " button twice, and press the " SETUP " button again to enter the homepage of setup menu.
R 8. HOW TO USE PROGRAMMING FUNCTION 8.1 PROGRAMMED PLAY FOR SVCD, VCD AND CD DISCS Press "PROG" to enter the interface as shown in picture at right, then press number keys to input track number.
R 9. HOW TO USE SEARCH FUNCTION Press this button to enter the search state. 9.1 FOR DVD DISC 1) Search of title/chapter Press SEARCH and the picture as shown in Picture 1 (on the right) appears on the screen. Use arrow key " " to select Title (as shown in Picture 2). Press number keys to specify the desired title. Then input the desired chapter, press "ENTER" button to play it.
R 9.2 FOR SVCD/VCD/CD DISCS ENTER Continuously press the SEARCH button and you can conduct disc time search , track time search and track search throughout the entire disc. 1) Whole disc time searching (search the whole disc) DISC GO TO : --:-- Press SEARCH to enter the interface as shown on the right (Picture 1). Directly input numbers, for example, input number 2, 2, 1, 8, and press ENTER to play from the specified time, i.e. 22:18 (minute, second).
R 3.2 In state of PBC off, directly press number keys to input the specified track. For example, if you want to select track 22, press " +10 " button twice, then press " 2 " , and press "ENTER" for confirmation. T he player will play track 22. Note: 1 . In Stop mode, you can only get whole disc time search and track search functions by pressing the SEARCH button. 2.
R The Operation Of Auto Replace KARAOKE And Auto Follow KARAOKE Choose [PARTNER LEFT] or [PARTNER RIGHT] to gain auto replace KARAOKE (When person is singing, the player doesn't sing; when person isn't singing, the player sings) or auto follow KARAOKE (when person is singing, the player is singing; when person stops singing, the player stops too) Note: This function only applies to VCD and DVCD discs. Noise handling: 1. Take the microphone far away from the TV set or SPEAKER. 2.
R 11.3 HOW TO SWITCH THE DIRECTORY OF MP3/WMA MENU Press arrow key " " to move the cursor to "PREV DIR " on the left of the screen, press "ENTER" on the remote control to return to the total directory. Press the arrow keys to move the cursor to select a different directory. Repeat the above operation to browse all the directories of the whole MP3/WMA disc. 11.4 HOW TO SELECT TRACKS FOR PLAY: There are two methods for choosing tracks. 11.4.
R Notes: 1) The player has two kinds of play methods: normal mode and document mode. In stop state, pressing the PROG button can switch the play methods between normal mode and document mode. Document mode: All the documents in the disc will be displayed for your selection. Normal mode: The documents in the disc will be displayed via directory structure. 2) If you want to play a MP3/WMA disc in sequence, you can set the play state of the player as Document Mode . 12.
R will play the pictures randomly. To get key explanation, press arrow keys to move cursor to "MENU" button, then press "ENTER" to display "Function Button Explanation" page, as shown in picture 3 on the right. Press "ENTER" to continue, and press it again to leave "Function Button Explanation" page. REMOTE PROGRAM STOP PLAY KEY FUNCTION TRANSITION EFFECT THUMBNAIL MODE NEXT PICTURE PREVIOUS PICTURE PICTURE MODE INVERT MIRROR CONTINUE PICTURE 3 12.1.
R 12.2 PREVIOUS PAGE/NEXT PAGE Press " " button to shift to the previous picture, and press " " button for the next picture. 12.3 PAUSE Press " PAUSE " to stop in the current picture. Press " PLAY " to resume play. 12.4 SCAN MODE SWITCH PROG In the sequential play, Press " PROG " to switch the display mode of pictures. For example, picture is displayed from up to down in mode 1 , but from down to up in mode 2 . Note: This player provides 15 kinds of display modes. ZOOM100% 12.
R 13. INTELLIGENT SCREENSAVER AND STAND-BY FUNCTION With the same function of screensaver and stand-by function as computer, it will automatically enter into screensaver after three minutes under stop or no disc state, so as to protect your TV screen. It will automatically enter into stand-by state after twenty minutes of screensaver, then DVD display is not light, video has no output, power consumption of the appliance is largely reduced, so as to enhance the safety and prolong lifespan.
R 15. DVD INTRODUCTION AND FEATURES DVD player is the ticket of your home theatre. Every technical index of this appliance is far superior to any previous video player. This completely new digital technology has compressed the audio - visual effect of cinema into a 12cm-diameter disc which is the same in dimension as the CD disc. It is also compatible with the existing SVCD, VCD and CD.
R SPECIAL FUNCTIONS OF DVD PARENTAL LOCK Some DVD discs may be harmful to children because of their content, so different restriction levels (G, PG, PG-13 or NC-17) are available to meet the users' requirements. The appliance can also restrict the playing of some discs according to your requirement so as to prevent children from watching some discs inappropriate to their age group. MULTIPLE LANGUAGES DVD discs can support 8 kinds of language sounds and 32 kinds of language subtitles.
R FUNCTION SUPPORTED BY DVD DISCS DVD discs support diverse functions. The discs produced by different manufacturers may support different functions. Dolby digital (AC-3) Sort of language Subtitle languages Picture proportion Parental lock Angles for viewing CLOSE CAPTION subtitle 16. DISC REFERENCE DISC PROTECTION : * Try not to scratch the disc. It shall be kept in the box after using. * Wipe the disc with a dry soft cloth from the center hole toward the outer edge.
R THIS APPLIANCE CAN PLAY THE FOLLOWING DISCS: 45
R 17. TECHNICAL SPECIFICATION VF Signal system MULTI/NTSC/PAL Audio response 20Hz-20kHz 1dB Audio s/n ratio 90 dB Audio output (analog audio) Electric level output : 1 2V Audio output (digital audio) Electric level output : 0.5Vp--p Output Video output Electric level output :1Vp--p resistance : 75 Unbalanced negative S-Video output Electric level output : brightness(Y)0.7Vp--p,chrominance(C):0.
R Dolby: * Produce under the authorization of Dolby laboratory. The symbol of Dolby and double D are trademarks of Dolby laboratory. It is a secret product and cannot be issued. C Dolby laboratory: 1992-1997. All rights reserved. Macrovision: This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
