Vintage Design Telephone with Caller ID Instruction Manual JT-P430 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit http://www.jWIN.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 -1- www.jWIN.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 USER SAFETY GUIDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packaging will inform about the methods of disposal. The materials are recyclable as mentioned in its marking.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 USER SAFETY GUIDE Compliance (USA and Canada) This product complies with the standards in Part 68 of the FCC Rules in the USA and CS-03 in Canada. 1. This product must be connected to the public switched telephone network through a modular telephone outlet or jack. 2.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 -4- www.jWIN.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 TABLE OF CONTENTS Getting Started General Features ……………………………………………………………………... In the Package ………………………………………………………………………... Location of Controls ………………………………………………………………..… Getting the Telephone Ready for Use ……………………………………………... Installing the Batteries ……………………………………………………………….. 6 6 7 8 8 Operational Instructions Basic Setup ……………………………………………………………………………. Receiving Caller ID Information ……………………………………………………..
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 GETTING STARTED Thank you for purchasing the JT-P430 Vintage Design Telephone with Caller ID. Please read and follow the instructions in this manual carefully to ensure that your product operates correctly.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 GETTING STARTED Location of Controls 1 8 2 9 3 4 5 6 7 10 11 12 13 14 15 16 17 1. Phone Hook 2. LCD Screen 3. DEL Button 4. SET Button 5. DIAL Button 6. ALARM ON/OFF Button 7. SNOOZE/DIMMER Button 8. UP Button 9. DOWN Button 10. Earpiece 11. TONE/PULSE Switch 12. FLASH Button 13. EARPIECE VOLUME Switch 14. MUTE Button 15. REDIAL Button 16. NUMERIC Keypad 17. Mouthpiece -7- www.jWIN.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 GETTING STARTED Getting the Telephone Ready for Use 1. Choose a desired flat, level surface location for the unit. 2. Plug one end of the coiled telephone cord into the jack on the handset, and the other into the matching jack on the unit’s base. 3. Plug one end of the flat telephone cord into the jack in the rear of the unit’s base (marked TEL-LINE), and the other end into the wall jack which supplies telephone service.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 OPERATIONAL INSTRUCTIONS Basic Setup Note: Please be sure the telephone lines are connected well and batteries or AC adapter are installed before starting setting. Press the DIAL button for three seconds to enter the setting menu, use ▲UP or ▼DOWN buttons to select from the menu including Set Language, Set Local Area Code, Set Time/Date and LCD Contrast. Press the DIAL button to exit setting manual. A.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 OPERATIONAL INSTRUCTIONS Basic Setup-continued - Press the DEL button to exit the setting If set alarm ON, the alarm icon will be displayed on LCD. When time to alarm, press the SNOOZE/DIMMER button to postpone the alarm time. Press the ALARM ON/OFF button to disable the alarm function G. SNOOZE FUNCTION Press the SNOOZE/DIMMER button for three (3) seconds to enter Snooze setting.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 OPERATIONAL INSTRUCTIONS Recieving Caller ID Information Note: Your Telephone Company must offer caller ID service in order for the caller ID function can be activated. A. Incoming Call Display - When there is an incoming call, the LCD will display the number, area code, name, time and date of the call. B.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 OPERATIONAL INSTRUCTIONS Flash Function When in an office equipped with PABX, this telephone makes it easy to transfer calls - Ask caller to wait and press the FLASH button once - Dial the extension number of the recipient.
Vintage Design Telephone with Caller ID V10M10_IM_EN_09072007 TROUBLESHOOTING & SPECIFICATIONS Troubleshooting • No Display on LCD Screen o Brightness on display may be turned down. Increase brightness level. o No batteries or batteries are improperly installed. If no batteries, install (4) AAA batteries as directed or Install optional AC Adapter Make sure batteries observe to polarities (+/-) as indicated inside the battery compartment.
Vintage Design Telephone with Caller ID - 14 - V10M10_IM_EN_09072007 www.jWIN.
TEL: 516-626-7188 FAX: 516-626-7105 website: www.jWIN.com © 2007 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product enclosed herewith including design, shape and graphics, may be reproduced or transmitted in any form without the expressed written consent of jWIN Electronics Corp. by any means, electronic or mechanical, including photocopying, recording, or by use of an information storage and retrieval system.
