Owner's Manual LCD Flat Panel TV JV-DTV17

Time Menu
24
()MoveO}{AdjustOMENU ()MoveO}{AdjustOMENU
Clock
OffOtimer
OnOtimer -i-i:i-i- AM
AutoOoff TVO3
VolOO30
Run
You must set the time correctly
before using on/off time function.
1. Repeatedly press the MENU
button to select the TIME
menu.
2. Press the
DD
/
EE
button to
select Clock.
3. Press the GG button and then
DD / EE
button to adjust the
hour.
4. Press the GG button and then
DD / EE
button to adjust the
minute.
5. Press the EXIT button to save
and return to TV viewing.
The off timer automatically switches the set to standby at the preset time.
1. Repeatedly press the MENU button to select the TIME menu.
2. Press the
DD / EE
button to select Off Time or On Time.
3. Press the GG button and then
DD / EE
button to select Run.
4. To cancel Off/On Time function, press the
DD / EE
button to select Hold.
5. Press the GG button and then
DD / EE
button to adjust the hour.
6. Press the GG button and then
DD / EE
button to adjust the minute.
7. Only On time function ; Press the
DD / EE
button to adjust volume level and
programe number.
8. Press the EXIT button to save and return to TV viewing.
Note :
a.In the event of power interruption (disconnection or power failure), the clock
must be reset.
b.Two hours after the set is switched on by the on time function it will automati-
cally switch back to standby mode unless a button has been pressed.
c.Once the on or off time is set, these functions operate daily at the preset time.
d.Off Timer function overrides On Timer function if they are set to the same time.
e.The set must be in standby mode for the On Timer to work.
Clock On/Off Time
Clock -i-i:i-i- AM
OffOtimer
OnOtimer
AutoOoff