JV-TV5020 USER’S MANUAL CUSTOMER SERVICE INFORMATION JWIN New York Office 51-41 59th Pl., Woodside, NY 11377 USA Toll Free Number: 1-866-807-JWIN E-mail: custservice@jwin.
JV-TV5020 USER’S MANUAL USER’S MANUAL JV-TV5020 outlet. Do not defeat the safety purpose of the polarized plug. CAUTION 6-2. RISK OF ELECTRIC SHOCK DO NOT OPEN Other Keys ① FREEZE : Enables selected channel freezes in QUAD mode, FULL mode, MODE function. CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE, REFER FOR SERVICE TO QUALIFIED SERVICE PERSONNEL. ② 1 ~ 8 : Enables selected channel be displayed in full screen.
JV-TV5020 USER’S MANUAL USER’S MANUAL JV-TV5020 V C R MODE : The Screen comes to VCR mode. . 20 AUTO MODE : Displays each channel sequentially. INDEX 19 PAGE FREEZE SECTION 1 A B 1 2 3 4 1. PURPOSE OF THIS PRODUCT 1 5 6 7 8 2. SPECIFICATIONS 2 SECTION 2 Z UP LEFT ENTER RIGHT DOWN 3. CONNECTIONS 3 4. INSTALLATION 5 MENU 4-1. Basic System Installation 5 4-2. Installation with a VCR or Time Lapse Recorder 6 MODE REMOTE CONTROL UNIT SECTION 3 5. OPERATION 5-1.
JV-TV5020 USER’S MANUAL USER’S MANUAL JV-TV5020 SECTION 1 5-6. Recording and Playback 1 There are two video output ports on the rear of the splitter. One 1. PURPOSE OF THIS PRODUCT of them is MON port which is for output of the Quadrant pictures The purpose of this COLOR QUAD SPLITTER is to provide an and sequential pictures. economical, but effective method to monitor more than one area with video Read the specifications for Time Lapse Recorder or VCR cameras.
JV-TV5020 USER’S MANUAL USER’S MANUAL JV-TV5020 2. SPECIFICATIONS a. key buzzer [Y] – When use this button, BUZZER voice sounds. 18 [N] – When use this button, BUZZER is dumb. 17 z b. loss buzzer System NTSC: [Y] – Camera connection signal becomes BUZZER sound if is z patience. 525 lines, 60 fields per second Input Signal Composite video, sync. Negative [N] – If camera connection sign is patience, BUZZER is dumb. z 5-5-4.
JV-TV5020 USER’S MANUAL USER’S MANUAL JV-TV5020 SECTION 2 2 3 Place the green color character to the DWELL TIME using the ◀ 3. CONNECTIONS ,▶ , ▲ and the ▼ buttons, and press the ENTER button to flash the Dwell Time and set it using The following connections are located on this splitter. See Fig. 1 the ▲ or the ▼ buttons. Press the ENTER button again for connection locations. Do not plug the power supply into this to stop flashing the Time. - splitter until all connections are made.
JV-TV5020 USER’S MANUAL USER’S MANUAL JV-TV5020 When it is set to be zero (OFF) the corresponding camera will Fig. 8 Page 4 Menu be skipped in the Automatic sequential switching mode. - Buttons on the Front View 16 Title [ INDIVIDUAL ] Dwell Alm Load CH1: C 1 CH2: C 2 CH3: C 3 CH4: C 4 QUAD A: PAGE 1 EXIT 03s 03s 03s 03s 03s OFF OFF OFF OFF 75 75 75 75 ① POWER button is to turn the system ON or OFF. ② REMOTE is IR(Infra-red) sensor.
JV-TV5020 USER’S MANUAL USER’S MANUAL ④ JV-TV5020 usage. See ‘Important Safeguards’ in this manual. DC IN is input for DC +12V. - 4. the DATE (MM:DD:YYYY). Change the content using the INSTALLATION 4-1. Install cameras to be connected to this splitter. 4 Basic System Installation 5 ▲ and the ▼ buttons. Press the ENTER button again to stop flashing the DATE. Perform following steps to install your splitter. See Fig. 3. - Use the ◀ and the ▶ buttons to shift the cursor to the next digit.
JV-TV5020 USER’S MANUAL USER’S MANUAL JV-TV5020 - menu screen. Pressing MODE/MENU button again, the Place the cursor to the date digit using the ◀ - 5-5-1. Page 1 GENERAL Menu The following items can be adjusted or programmed on this 13 menu screen. [ GENERAL ] 4-2. : 00:00:00 : 01/01/2002 :MM/DD/YYYY : [Y] : [Y] : [Y] : [BLUE] : OFF : [Y] Connect the DC power cord between this splitter and your wall mounted power outlet. - Turn on the power of all cameras and this splitter.
JV-TV5020 USER’S MANUAL USER’S MANUAL - JV-TV5020 Check if you are ready with following stuffs. z Recorder z Two RCA to BNC video coaxial cables for Time Lapse 6 Recorder z Video Tape z Two RCA to RCA video coaxial cables for consumer recorder (if necessary) - Connect one video coaxial cable from the VCR OUT on the back of the splitter to the VIDEO IN port of the VCR. - Plug the DC power cords for the splitter and the recorder into the wall mounted power outlets.
JV-TV5020 USER’S MANUAL USER’S MANUAL JV-TV5020 Fig 5. MENU PAGE[1], [2], [3], [4], [5] 5-3. SECTION 3 Automatic Camera Skip in the Auto Mode If you do not wish to view a particular camera, set 12 the 5. OPERATION DWELL TIME in the MENU(2),(3) setup mode to a value of 5-4. zero. 5-1 Change Display Mode Manual Mode Operation There are 6 Different display mode styles as shown below.
JV-TV5020 USER’S MANUAL USER’S MANUAL C1 01/01/2002 00:00:00 JV-TV5020 C1 AUTO key CHANNEL key 01/01/2002 00:00:00 Any Mode Auto Sequence Mode Single Mode Single Mode The following diagram shows the sequence of selected mode when pressing QUAD key and CHANNEL keys. QUAD key CHANNEL key QUAD Mode Auto Sequence Mode Sequence PIP Mode Single Mode Any Mode Sequence PIP Mode The following diagram shows the sequence of selected mode when pressing MODE key. MODE key QUAD key Sequence PIP Mode 5-2.
