MODEL # JX-CD678 CD PLAYER WITH BASS BOOST, 60-SECOND SUPER A.S.P. INSTRUCTION MANUAL Visit our web site www.jwin.
WARNING To prevent fi re or shoc k haz ar d, do not expose the unit to rain or mois ture. To avoid el ectrical shock , do not open the c abinet. Refer s ervic ing to qualified personnel only. SAFETY PRECAUTION 1. As the las er beam used in this compac t disc player is harmful to the eyes, do not attempt to disass emble the c as ing. 2. Stop operation immediately if any liquid or solid objec t should fall into the cabinet. Unplug the unit and have it c heck ed by qualified personnel. 3.
IMPORTANT NOTES z us so please take care when operating Yo ur hearing is very important to you and to this equipment. It is strongly recommended that you follow the listed guidelines in ord er to pre vent possible damage or lo ss of hea ring: ESTABLISH A SAFE SOUND LEVEL • O ver time you r hearing will ad apt to conti nuous loud sounds and will give the i mpressi on that the volume has in fact been reduced. What seems normal to you may in fa ct b e har mful.
POWER SOURCES NORMAL BATTERIES / AC ADAPTOR Battery Power Operation AC Adaptor Operation ( AC adaptor not included ) 1. Open the battery compartment cover and insert two “AA” (UM-3) alkaline batteries (not included) inside the battery compartment. Follow the polarity as indicated in the battery compartment. 2. Close the battery compartment cover. Only use a 4.5V/500mA DC, positive center pin power adapter. Any other adapter may damage the set. 1.
HEADPHONE AND HI-FI CONNECTION Listening with the headphones Connecting to component audio systems Connect the plug of the stereo headphones ( included ) into the PHONES ( GREEN ) socket. Connect the stereo connection cable ( not included ) into the LINE OUT ( BLACK ) socket of the unit and the CD / AUX inputs of an audio system. Caution: Avoid excessive volume levels for a long period of time when using headphones, as this may impair your hearing.
LOCATION OF CONTROLS 13 1 3 2 11 12 9 14 10 4 5 6 7 8 1. DISPLAY WINDOW 9. PLAY/PAUSE BUTTON 2. PROGRAMME BUTTON 10. STOP BUTTON 3. MODE BUTTON 11. SKIP/SEARCH FORWARD BUTTON 4. LINEOUT SOCKET 12. SKIP/SEARCH BACKWARD 5. PHONES SOCKET BUTTON 6. VOLUME CONTROL 7. BASS BOOST SWITCH 13. DC 4.5V INPUT SOCKET 8. OPEN SWITCH 14.
BASIC DISC PLAY 1. Connect the Headphones to the PHONES ( GREEN ) socket. 2. Slide the OPEN switch to open the CD compartment lid. 3. Adjust the VOLUME to minimum. 4. Insert the disc with the label side facing up. 5. Close t he lid securely un til a click is heard. 6. Press t he PLAY/PA USE but ton to start playing. 6 1 3 2 5 4 To enhance the ba ss effec t Set t he BASS BOO ST swit ch to the ON position.
LCD DISPLAY INFORMATION During PLAY mode The track number and the elapsed playing time are displayed. This sixth track has elapsed 2 min 30s ec. During STOP mode The total number of tracks and the total playing time of the disc are displayed. During PAUSE mode The track playback is paused, the elapsed time and track number is flashing. Note: When lid is opened during play mode _ _ _ _ shows in the display indicating the door is open. Note: A flashing be ch anged.
REPEAT / PLAY MODES Every time the MO DE button is pressed, the corresponding mode appears in the displa y win dow, in t he following sequence : Shown in the LCD display. Th e cu rre nt t ra ck on th e disc will be repeated. Shown in the LCD display. A ll t racks on t he disc will be repeated . During pl ay 1press X During play 2 presses X NOTE: In normal mode none of the above symbols show in the display.
INTRO SCAN AND PROGRAMMED TRACK PLAY INTRO Plays the first 10 seconds of each track on the disc. Press to start playing “ INTRO ” scan. Du ring play 3 presses X PROGRAM This allows selected tracks on the disc to be played in any desired order. To set the pr ogra m play *Programs can be set in the STOP mode. 1. Press the PRO GRAM butt on when the unit is in the stop mode. Th e t rack num ber will a ppe ar in the display with t he indicat or flashing. 2. Press or to select the desired track. 3 .
RANDOM PLAY/SKIP AND SEARCH FUNCTIONS RANDOM Enables all the tracks on a disc to be played in a Random ( RAND ) sequence. For example : If “RAND” is selected while playing track 8, the random function will commence once track 8 has ended. When all tracks on a disc have been played the player will automatically stop and power down in approx. 1 minute to preserve battery life. D uri ng pla y 4 presses X Press MODE button again to return to the NORMAL play mode.
SUPER ANTI-SKIP OPERATION This player incorporates a superior electronic anti-skip circuit which prevents interruption of the sound output when the unit is subjected to shock, vibration or rolling during disc playback. If in use the player is likely to be subjected to shock, vibration or rolling ( i.e. while walking or if used in a vehicle ) press the Super ASP button to provide uninterrupted playback.
PLAYER MAINTENANCE Cleaning the C abine t Wipe with a so ft cloth. I f the cabinet is very dirty, dampen the clo th with a weak solution of neu tral de tergent and water, and then wipe clean. Cleaning the Lens A dirt y len s will cause sound skip ping. If th e lens is very dirty, open the CD compartment lid and clean the lens as f ollows : Dust or Dry Par ticles Using a camera lens brush / blower, blow on t he lens couple times, then wipe it lightly with the brush to re move dust .
DISC CLEANING AND TROUBLESHOOTING GUIDE Cleaning the Disc When a disc becomes dirty, clea n it wit h a cleaning clo th. Wipe the disc from t he cent er out. Note: Do not use solvents such as benzene, thinner, commercially available cleaners or anti-static spray intended for analog discs.
