R STEREO HI-FI SYSTEM with 4 CD CHANGER / MP3 and AM/FM PLL SYNTHESIZED TUNER MODEL JX-CD8700 OWNER'S MANUAL Visit our Web Site: http://www.jwin.
PRECAUTIONS CAUTION: WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PRESENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD. DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
INSTALLATION INSTALLATION (Wall Mounting) MAIN UNIT ASSEMBLY AND DISASSEMBLY CAUTION - This product may be use only with JWIN model JX-CD8500 stand. Use with other stands may result in instability causing possible injury. STEP 1 STEP 2 Secure the center unit and speakers on the wall (as show below) using 8 dowels and 8 screws (supplied).
CONTROLS 1 2 23. SNOOZE Button Turns off the unit for 9 minutes, after which the unit will then resume its previous function 24. FOLDER UP Button Activates the MP3 folder (in ascending order) 25. SLEEP Button Set the automatic switch-off time 26. LEFT CD DOOR 19. FOLDER DOWN Button Activates the MP3 folders (in descending order) TUNING - SKIP/SEARCH Button 20. CD backward title selection / CD backward search operation / Manual tuning of stations, station search operation 21.
Antenna connection AC power connection You can achieve acceptable reception if you use the supplied FM “pigtail” antenna. If so, the antenna should be elongated and not coiled or bunched up. If it hangs freely, it can be quite effective. Connect the power cable (included in the accessories) first to the power socket (27) at the unit and then insert the power plug into the wall outlet. When you disconnect the plug from a socket, do not pull the cable, always pull the plug.
AMPLIFIER AND RADIO FACILITY AM/FM radio operation Switching the unit ON Switch the unit on by pressing the "POWER" button (1)/(32). Switch to the Tuner operating mode by pressing the button "TUNER / BAND" (7)/(53). Press the "POWER" button (1)/(32) to turn on the system. Operating mode selection The different operating modes can be directly selected using the buttons “PLAY / PAUSE ” (13)/(38) for CD operation and “TUNER / BAND” (7)/(53) for radio reception (3).
DIGITAL CLOCK AND TIMER 3. To set the minutes, press the MEM./CLK ADJ. again and use TUNING + SKIP/SEARCH and TUNING - SKIP/SEARCH to adjust. Confirm by pressing MEM./CLK ADJ. 4. Press DISPLAY MODE to proceed to setting the switch-off time. Setting the digital clock When you first plug in the unit, the display shows: To set the clock to the current time proceed as follows: 1. 2. 3. 4. Press MEM./CLK ADJ. The hour flashes.
The selected number appears on the display. If the CD player is in stop mode, play starts automatically when a track is selected using the numerical buttons. Random play Press RANDOM on the remote control before or during CD play. The tracks in the CD will be played in random sequence. To play the program, press PLAY/PAUSE. The program can be played back again as long as MEMORY appears on the display.
4. Press the “ TUNING + or TUNING -” button (18) or (20) to select desired track. To play back the program, press the “ PLAY / PAUSE” button (13)/(38). When “ PLAY / PAUSE” is pressed, the program can be played back again as long as MEMORY appears on the display unit (3). 3. Select the desired title using the numeric buttons “0 - 9 / +10” (33) on the remote control device or by repeatedly pressing “ TUNING + or TUNING ”. 5. Press the “PLAY/PAUSE” button to play MP3.
SPECIFICATIONS GENERAL Power requirement Power consumption Dimension AC DC 120V ~ 60Hz Battery size “CR2032” for Remote Handset AC 35 Watts Unit Speakers 440 (W) x 171.5 (D) x 1075 (H)mm 207.7 (W) x 171.5 (D) x 1065 (H)mm RECEIVER SECTION Receiving bands Tuning range AM/FM AM 530 - 1710KHz FM 87.