PORTABLE DVD PLAYER WITH 9” ACTIVE MATRIX TFT LCD Instruction Manual JD-VD762 Please read this manual carefully before operating and save it for future reference. Have a question? Please visit http://www.jWIN.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 USER SAFETY GIUDE IMPORTANT SAFETY INSTRUCTIONS WARNING: To prevent fire or shock hazard, do not expose this appliance to rain or moisture. These markings are located on the bottom, side or back of the unit. CAUTION: To prevent the risk of electric shock, do not remove cover (or back). Non- userserviceable parts inside. Refer servicing to a service professional.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 USER SAFETY GIUDE INSTRUCTIONS ON ENVIRONMENT PROTECTION Do not dispose of this product in the usual household garbage at the end of its life cycle; bring it to a collection point for the recycling of electrical and electronic appliances. This symbol on the product means the instructions for use or the packing will inform about the methods for disposal. The materials are recyclable as mentioned in its marking.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 USER SAFETY GIUDE IMPORTANT SAFETY PRECAUTIONS – CONTINUED 14. OBJECT and LIQUID ENTRY - Care should be taken so that objects do not fall and liquids are not spilled into the device’s openings. 15. CARTS AND STANDS - The appliance should be used only with a cart or stand that is recommended by the manufacturer. An appliance and cart combination should be moved with care.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 USER SAFETY GIUDE FCC NOTICE (USA) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 TABLE OF CONTENTS 1. 2. 3. Getting Started a. Compatibility ……………………………………………………………………. 6 b. Introduction ……………………………………………………………………… 7 c. Location of Controls ……………………………………………………………. 8 d. Location of Controls (Remote) ………………………………...……………… 10 e. Installing the Batteries in the Remote Control ………………………………. 10 f. Connecting the Player to a TV or Amplifier………………..…………………. 11 g.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 GETTING STARTED COMPATIBILITY DVD VIDEO Multi-angle AUDIO CD Subtitle choices MP3 CD Audio choices Kodak Picture CD TV Aspect Ratio Dolby® Digital This product incorporates copyright protection technology that is protected by method claims of certain U.S patents and other intellectual property rights owned by Macrovision Corporation and other rights owners.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 GETTING STARTED Thank you for purchasing the JD-VD762. Unpack the unit and make sure to put aside all accessories so they will not be lost. We recommend that you retain the original carton and packaging materials for future use, should you transport or ship the unit in the future.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 GETTING STARTED Location of Controls -8- www.jWIN.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 GETTING STARTED Location of Controls-continued 1. LCD TFT Screen 2. Volume- Button 3. Volume+ Button 4. Menu Button 5. Title Button 6. Display Button 7. Setup Button 8. Audio Button 9. Subtitle Button 10. Navigation Up Button 11. Navigation Right Button 12. Navigation Down Button 13. Play/Pause Button 14. STOP&USB/SD/MMC Card Button 15. NEXT&F.FWD Button 16. PREVIOUS&F.BWD Button -9- 17. Enter Button 18. Navigation Left Button 19.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 GETTING STARTED Location of Controls-Remote 9 10 11 1 1. SCREEN ON/OFF & BRI/COL Button 2. TITLE Button 3. PREV./F. BKWD Button 4. NEXT/F. FWD Button 5. NAVIGATION Buttons 6. NUMERIC Buttons 7. PROGRAM/ANGLE Button 8. VOLUME - Button 9. ON/STANDBY Button 10. MENU Button 11. SETUP Button 12. DISPLAY Button 13. STOP-USB/SD/MMC Card Button 14. OK/ENTER-PLAY/PAUSE Button 15. SUBTITLE Button 16. AUDIO Button 17. SEARCH Button 18.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 GETTING STARTED Connecting the Player to a TV or Amplifier When connecting the JD-VD762 to other devices, it is recommended that a multi-system television is used. Before connecting this unit to a TV or amplifier, make certain that all devices, including the JD-VD762 are switched off, all AC cords are disconnected from wall outlets, and that ventilation holes are not blocked.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 GETTING STARTED Turning on the Unit To turn on the JD-VD762, slide the POWER switch on the side of the unit to ON or press the POWER button on the remote control. (If connected to an amplifier or TV set, turn the connected device ON) Using Headphones This unit has a jack for connecting headphones (3.5MM). To connect headphones (not included), plug the headphone cable into the 3.5MM jack located on the side of the JD-VD762.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 OPERATIONAL INSTRUCTIONS System Setup The SYSTEM SETUP options are illustrated below: 1. TV SYSTEM Choose the TV system best suited for your TV set. Available options are PAL, NTSC or AUTO. See user’s manual for your TV set for guidelines. 2. LCD MODE Choose the LCD mode. Available options are 4:3 or 16:9 3.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 OPERATIONAL INSTRUCTIONS Language Setup The Language Setup options are illustrated below: Note: The disc must be encoded with multiple languages in order to use these options. When your preferred language choice is not available, the disc will use its default language. 1. OSD LANGUAGE Highlight the OSD LANGUAGE option to choose the preferred language for On-Screen Display.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 OPERATIONAL INSTRUCTIONS Video Setup The Video Setup options are illustrated below: 1. BRIGHTNESS Highlight the BRIGHTNESS option using the Up and Down (ST) NAVIGATION buttons to adjust the brightness. Note: The BRI/COL (Brightness/Color) feature can be used by pressing this button on the remote control once for brightness or twice for color. Use the left and right (WX) buttons to make changes. 2.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 OPERATIONAL INSTRUCTIONS Basic Playback Operation Place a disc in the tray. Playback will start automatically. 1. ADJUSTING THE VOLUME Press the VOLUME+ button to increase the volume or the VOLUME – button to reduce the volume. 2. SKIP FORWARD/BACKWARD Press the NEXT or PREV buttons once to skip a chapter (on a DVD) or track (on a VCD/CD) forward of backward. 3.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 OPERATIONAL INSTRUCTIONS Basic Playback Operation-continued 9. PROGRAMMED PLAYBACK This unit has 16 a track programmable memory that allows you to program up to 16 tracks on any disc for playback in any desired order. Program up to 16 tracks or program certain tracks to play more than once. To perform programmed playback, proceed as follows: • While in the PLAY or STOP mode, press the PROGRAM button.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 OPERATIONAL INSTRUCTIONS Basic Playback Operation-continued 15. PBC FEATURE When playing a VCD with PBC function, you can enjoy simple interactive software on the TV screen. By turning on this function, desired tracks can be selected by pressing the numeric buttons. This feature is enabled only when a VCD2.0 disc supports the PBC feature. After selecting a track, press the ENTER button to start playing the selected track.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 MAINTENANCE Notes on CDs 1. Before playing, clean the CD with a cleaning cloth. Wipe the CD from the center out to the ends. 2. Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. 3. Do not expose the CD to direct sunlight or heat sources such as hot air ducts.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 TROUBLESHOOTING GUIDE When the instructions in this manual are followed, this unit should function properly. However, if any of the following difficulties occur and cannot be corrected by the user or if a problem arises that is not mentioned here, please contact jWIN Customer Service or a qualified service technician. 1. Unit Does Not Play • Unit may be disconnected from power source. Check connection. • Disc is not correctly set.
Portable DVD Player with 9” Active Matrix TFT LCD V12M12_IM_EN_09092008 SPECIFICATIONS • • • • • • • • • Solution: Sunplus SPHE8202D Loader: Samsung SP1CHU TV System: NTSC / PAL / AUTO Aspect Ratio: 16:9 / 4:3LB / 4:3PS LCD Panel o Diagonal Size: 9" o Viewing Angles: (-60 ~ 60 Horizontal) / (-60 ~ 40 Vertical) (Typ.) Audio Output Power o RMS output at 10% THD: 0.12W o Maximum output: 1.2W Inputs & Outputs o Video Output Jack o Audio Output Jack o 3.
TEL: 516-626-7188 FAX: 516-626-7105 website: www.jWIN.com © 2008 jWIN Electronics Corp. All rights reserved. No portion of this printed material or product enclosed herewith including design, shape and graphics, may be reproduced or transmitted in any form without prior written consent of jWIN Electronics Corp. by any means, electronic or mechanical, including photocopying, recording or use of an information storage and retrieval system.