AnaKonda KAN200+ USER’S GUIDE English
KAN200+ Contents 1. INTRODUCTION 2. APPLICATIONS 3. KEY FEATURES 4. UNPACKING 5. PACKAGE CONTENT 6. SAFETY 7. PHYSICAL 8 CONNECTORS AND SET UP 9. COVERAGE 10. ACCESSORIES AND CONFIGURATIONS 11. SERVICE 12. SPECIFICATIONS 15. DECLARATION OF CONFORMITY 3 6 6 6 6 6 7 8 9 10 11 12 13 14 REV.
KAN200+ 4 REV.
KAN200+ SYMBOLS K-array declares that this device is in compliance with applicable CE standards and regulations. Before operating the device, please check your specific country regulations! WEEE Please dispose of this product when it reaches the end of its life by bringing it to your local collection point or recycling center for electrical/electronic items. This symbol alerts the user to recommendations about the product’s use and maintenance. Warning! Dangerous voltages: RISK of electric shock.
KAN200+ 1. INTRODUCTION The K-array Anakonda KAN200+ is a truly revolutionary speaker module born to meet the needs of places where few had dared to go up to now. It is designed to be a problem solver in situations where a traditional speaker box can’t be used but where good intelligibility, ultra-reliability and a sleek design are required. The KAN200+ is the perfect fit for any distributed sound application.
KAN200+ 6. SAFETY WARNING Read all safety information below and operating instructions before using this device to avoid injury. Safety and handling information Warning. Failure to follow these safety instructions could result in fire, shock or other injury or damage to the device or other property. It is important that loudspeaker systems are used in a safe manner. Avoiding Hearing Damage. Professional loudspeakers are capable of producing extremely high sound levels and should be used carefully.
KAN200+ 7. PHYSICAL 2019 mm 31 mm 2000 mm 80 mm 98.8 mm M5 n°2 Holes 27.5 mm 27.5 mm M5 n°2 Holes WEIGHT: 8 35 mm 56 mm 35 mm 56 mm 5.2 Kg 11.5 lb REV.
KAN200+ 8 CONNECTORS AND SET UP 1) Powered signal parallel INPUT. Four-pin female speakon. 2) Powered signal parallel LINK/OUTPUT. 4-pin male speakon. 3) Connector secure lock. Pull it back and turn the connector to unplug it. 1 FEATURES Audio power signal on pins 1+/1- of the NL4 connectors is fed into the speaker, while the signal on pins 2+/2- passes through from one socket to the other. Thus, the signal can pass through multiple KAN200+ modules without additional external cabling.
KAN200+ 9. COVERAGE 160° 30° 10° 10 REV.
KAN200+ 10. ACCESSORIES AND CONFIGURATIONS Socks Wall bracket Multi purpose bracket K-ANLINK (not included) Use K-ANLINK to pick the signal up from pins 2+/2of a KAN200+ NL4 connector to feed into a different loudspeaker. When K-ANLINK is used to connect a KAN200+ to another KAN200+ it integrates perfectly to make a uniform-looking series of speakers. K-ANLINK 11 REV.
KAN200+ 11. SERVICE To obtain service: 1) Contact the official K-array distributor in your country. Your local distributor will direct you to the appropriate service center. 2) If you are calling for service, please have the serial number(s) of the unit(s) available for reference. Ask for Customer Service, and be prepared to describe the problem clearly and completely. 3) If the problem cannot be resolved over the phone, you may be required to send the unit in for service.
KAN200+ 12. SPECIFICATIONS Acoustics Speaker power handling 150 W(AES) Max power 300 W (1) Impedance 32 Ω Frequency range SPL 1W/1mt Maximum SPL 150 Hz – 18 KHz +/- 6dB (2) 89 dB (3) 102 dB continuous – 106 dB peak (4) Coverage Horizontal Vertical 160° 10° Crossover Type Frequency External cross over required 150Hz, 24dB/oct suggested minimum Transducers Full-range 16 x 1” Neodymium cone driver with 0.
15. DECLARATION OF CONFORMITY 14 REV.
KAN200+ The contents of this manual are furnished for informational purposes only. K-array surl assumes no responsibility for any errors or inaccuracies that may appear in this manual. K-array reserves the right to make modifications without prior notice. 15 REV.
UMC057AA01ENB K-array s.r.l. unipersonale Via Paolina Romagnoli - 50037 San Piero a Sieve (Firenze) - Italy tel. +39 055 8487222 - fax. +39 0558487238 e-mail: info@k-array.com www.k-array.com 16 REV.