User's Manual

E1 Spread Spectrum Radios

5-4

Now press the OK button of the panel. It will display the alarm message. Press the Right/Left button of the

panel. The LCD displays the current alarm message. Please refer to section 9.2.For example:

Figure 5-5 Alarm Function

Whenever there is an alarm, the LCD back light will light for 2 minutes and the buzzer sounds goes off. Other

than removing the alarm status or switching off the buzzer status, we can switch off the buzzer by pressing the

SEL button. To switch on the buzzer, please enter the IDU Info/Buzzer: On/Off.

Figure 5-6 Buzzer OFF

1. Message in

the next page

2. Press to read the

3. The first line of the LCD

shows the line shifts

towards the left