User's Manual

E1 Spread Spectrum Radios
5-20
5.2.4 Remote Info
Figure 5-44 Remote Info
D1. Remote ID: n
Display the address of remote equipment; n=1~255. It is possible to check the remote end’s current ID
address.
Figure 5-45 Remote ID:n
D2. Far-End: OK/Alarm/Loss/Test
Display the link status of the remote end equipments. It is used as a function of signal monitor for the
determination of its source.
OK: active connection
Alarm: remote system alarm occurs
Loss: remote monitor loss
Test: remote system test activated