User's Manual

3. Calculate the actual power of booster in the pole as follow:

Access point Power(dBm) – Cable Loss(dBm) – Misc. Loss = Input

Signal Level(dBm)

Note: Misc. Loss means loss of connector, adapter and DC injector and

estimates to be around 2 dB.

4. If the input signal level exceeds the max. Transmitter Input Power or

fails to meet the min. Transmitter Input Power of booster, the booster

can’t identify the input signal. Under this circumstance, user should

adjust the input signal level to fit the requirement such as using an

attenuation pad or a higher loss cable and vice versa.