Manualshelf

Datasheet

ManualsBrandsKÜBLER ManualsPanel-Mount InstrumentsW 17.50 12 V/DC Pulse counter type W 17.50 7-digit Assembly dimensions 45 x 22.2 mm
123
99www.kuebler.com
RoHS
© Fritz Kübler GmbH, subject to errors and changes. 10/2016
Pulse
counters
Pulse counters, electromechanical
Characteristics
• 6- or 7-digit miniature pulse counters, adding without reset.
• Low power consumption.
• Available for all common DC and AC voltages.
• Versions available for DIN 48 x 24 mm and many other
panel mount dimensions as well as for other types,
e.g. PCB mount.
Benefits
• Long service life / Protection IP41 (front side).
Applications
Battery-powered devices, heat and water consumption
measurement, establishing tolls and charges, general quantity
counting.
The mini totalizers W 16 and W 17 are not resettable, and have
been designed for various front panel sizes in a wide variety of
applications.
They offer an excellent price / performance ratio and are easy to
operate.
Type series
Accessories Dimensions in mm [inch] Order no.
Transparent cover, lockable, IP65
Sealing cover type K1, IP65
for cut-out 54 x 29 [2.13 x 1.14], for screw mounting to front bezel F1B or
adapter front bezel N003001,
for counters with cut-out 50 x 25 [1.97 x 0.98] or 45 x 22.2 [1.77 x 0.87]
N003002
suitable for front bezel 60 x 50 [2.36 x 1.97], for screw mounting of electromech.
counters and via adapter front bezel N003001 for counters 48 x 24 [1.89 x 0.94] G008301
Suitable gaskets, other accessories and installation examples for optional accessories can be found in chapter accessories or in the accessories section under: www.kuebler.com/accessories.
Adapter front bezel, 72 x 36 [2.83 x 1.42]
Adapter front bezel, 53 x 28 [2.09 x 1.10]
Adapter front bezel, 56 x 40 [2.20 x 1.57]
Adapter front bezel, 48 x 48 [1.89 x 1.89]
Adapter front bezel, 60 x 50 [2.36 x 1.97]
for cut-out 68 x 33 [2.68 x 1.30] to cut-out 45 x 22.2 [1.77 x 0.87],
for counters 48 x 24 [1.89 x 0.94], as set black and silver anodised 162704 Set
for cut-out 50 x 25 [1.97 x 0.98] to cut-out 45 x 22.2 [1.77 x 0.87],
with clip mounting for counters 48 x 24 [1.89 x 0.94] anthracite T008180
for cut-out 50 x 25 [1.97 x 0.98] to cut-out 45 x 22.2 [1.77 x 0.87],
with screw mounting for counters 48 x 24 [1.89 x 0.94] anthracite T008181
for cut-out 45 x 45 [1.77 x 1.77] to cut-out 45 x 22.2 [1.77 x 0.87],
with clip mounting for counters 48 x 24 [1.89 x 0.94] black T008883
for cut-out 54 x 29 [2.13 x 1.14] to cut-out 45 x 22.2 [1.77 x 0.87],
with screw mounting and gasket for counters 48 x 24 [1.89 x 0.94] black N003001
Mounting frame
with cut-out 50 x 25 [2.36 x 1.97]
via separate adapter also for 45 x 22.2 [1.77 x 0.87]
for snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 53 x 28 [2.09 x 1.10]
and via separate adapter (T008180) for counters 48 x 24 [1.89 x 0.94] chromated G300004
Mini counters W 16 / W 176 or 7 digits without reset (AC+DC)
Order information
· Art. no.
· For special voltages, please give type, voltage, kind of voltage and series e.g.: W 16.20, 9 V DC, 05, black
Description / mounting Panel mount dim. Housing Display 6 digits 7 digits
Panel mount + mounting clip, 34 x 23 mm
[1.34 x 0.91“]
31 x 20
mm [0.79 x 0.25“]
plastic front side
W 16.20 -
Panel mount + mounting clip, 48 x 24 mm
[1.89 x 0.94“]
45 x 22.2
mm
[1.77 x 0.87“]
plastic front side
- W 17.50
PCB mount, lying sheet steel on the top
W 16.60 -
Panel mount + mounting clip, 42 x 28 mm
[1.65 x 1.10“]
37.5 x 23.5
mm
[1.48 x 0.93“]
plastic front side
- W 17.90

Summary of content (3 pages)