Datasheet

75www.kuebler.com
RoHS
POSITION
1 2 1
1 2 1
1 3 4
1 2 3 4
1 2
1
max.
60 kHz
- 20° + 65°
IP65
DC
10 ... 30 V
AC
100 ... 240 V
© Fritz Kübler GmbH, subject to errors and changes. 10/2016
Pulse counters
Pulse counters, electronic
The Codix 541 is a voltage powered pulse counter / position
display with 4 count input modes: count direction, difference,
addition, quadrature (phase discriminator) x1, x2 and x4, for fast
and slow count pulses, with 6-digit LED display for NPN, PNP
input signals.
Powerful
• Fast count input – input frequency max. 60 kHz.
• Robust housing – IP65 protected.
• Very bright LED display, 14 mm high.
• Position, difference, adding or count direction detection:
- programmable for positive (PNP) or OV (NPN) switching
input pulses.
- fast count input with an input frequency of max. 60 kHz,
can be damped to 30 Hz for mechanical contacts.
• Short start-up time – detects input pulses just 16 msec after
being switched on => no pulses are lost with a simultaneous
motor start-up.
User-friendly and universal
• Large keys – can also be operated when wearing gloves.
• Simple uniform menu-driven programming and operation
– possible to enter the programming also during operation
with a confirmation prompt.
• Individually programmable scaling:
Multiplication and division factor (0.0001…99.9999), to
display corresponding engineering units, e.g. position in
1/10 mm or packaging units.
• 4 different count input modes:
2-channel count input for detecting count direction, difference
or adding mode, quadrature with x1, x2 or x4 evaluation.
• Freely programmable setpoint.
• AC or DC power supply with sensor power supply.
• As an alternative to the HTL inputs, devices are available with
a 4 ... 30 V DC input level, for use as parallel displays to PLCs.
• Optional output - as zero signal.
Order code
a
Output
1 = Optocoupler output
2 = No output
1)
b
Power supply
0 = 100 ... 240 V AC, ±10 %
1)
3 = 10 ... 30 V DC
1)
c
Input switching level
0 = Standard level (HTL)
1)
A = 4 ... 30 V DC
Replacement parts
7 pin screw terminal RM 3.81 1 ... 7: N100387
2 pin screw terminal RM 5.08 1 ... 2: N100133
Delivery specification
· Digital display
· Mounting clip
· Gasket
· 2 screw terminals
· Instruction manual, multilingual
1) Stock types.
Plug-in
screw terminal
6.541 . 01 . XX X 0
cba
Temperature
range
High protection
level
Position
display
Count with
direction (DIR)
Differential
count (up.dn)
Add/Add count
(up.up)
Phase
discriminator
Pulse counter/
Totalizer
Accessories Dimensions in mm [inch] Order no.
Suitable gaskets as well as further accessories can be found in the accessories section or in the accessories area of our website at: www.kuebler.com/accessories.
LED pulse counters Codix 5416 count modes (AC+DC)
Mounting frame
with cut-out 92 x 45 [3.62 x 1.77]
for snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 96 x 48 [3.74 x 1.89]
grey G300005
Power supply