Datasheet
170
RoHS
IP65
≥ 1 ms
DIN 96 x 48
000000
- 20° + 65°
DC
10 ... 30V
AC
100 ... 240 V
www.kuebler.com © Fritz Kübler GmbH, subject to errors and changes. 10/2016
Hour meters / timers, electronic
The Codix 543 is an externally powered timer, hour meter or
short-time meter with 4 start input types and individually
adjustable time base.
The 6-digit LED display shows the NPN, PNP input signals used
for pulse width or time interval measurement.
Powerful
• High accuracy thanks to quartz time base.
• Robust housing – IP65 protection.
• Very bright LED display 14 mm high.
• Time base can be set individually
- hours, minutes or seconds, the decimal point allows setting
it even more accurately, up to max. 3 decimal places.
- smallest achievable resolution: milliseconds.
- time base hours (minutes and seconds as real-time display).
• Short start-up time – detects incoming pulses already 16 ms
after having been switched on => no loss of pulses in case of
a simultaneous motor start.
• Individually adjustable Start/Stop function
2 Start/Stop inputs allow achieving 4 different measuring
principles such as, for example, active or passive pulse width
measurement, time interval measurement with one single input
or with separate inputs.
Order code
a
Output
1 = Optocoupler
2 = No output
1)
b
Power supply
0 = 100 ... 240 V AC, ±10 %
1)
3 = 10 ... 30 V DC
1)
c
Input switch level
0 = Standard (HTL)
1)
A = 4 ... 30 V DC
Replacement parts
7 pin screw terminal RM 3.81 1 ... 7: N100387
2 pin screw terminal RM 5.08 1 ... 2: N100133
Delivery specification
· Digital display
· Mounting clip
· Gasket
· 2 screw terminals
· Instruction manual, multilingual
Power supply Temperature
range
DIN front bezel Menu-driven
programming
TimerHigh protection
level
Plug-in
screw terminal
Resolution
6.543 . 01 . XX X 0
cba
1) Stock types
Accessories Dimensions in mm [inch] Order no.
Suitable gaskets as well as further accessories can be found in the accessories section or in the accessories area of our website at: www.kuebler.com/accessories.
Codix 543h, min, sec or hh.mm.ss (AC+DC)LED timers
Mounting frame
with cut-out 92 x 45 [3.62 x 1.77]
for snap-on mounting on 35 [1.38] top-hat DIN rail,
for counters 96 x 48 [3.74 x 1.89]
grey G300005
User-friendly and universal
• Large keys – pressing either of the keys switches between
displays (utilisable même avec des gants).
• Programming
- Simple and unified programming and operation thanks to
menu-driven programming.
- possibility to enter the programming mode also during
operation with an authentication query.
• Manual or electrical reset
Tamper-proof thanks to lockable reset function.
• Freely programmable setpoint
Start time at which time counting begins.
• AC or DC power supply with sensor power supply.
• As an alternative to the HTL inputs, devices with a 5 V DC input
level are available, for use as parallel displays for PLCs.
• Optional output: 1 Hz clock pulse in case of active time
measurement.