User manual

12
Operating instructions
Electronic display counter
and
Please note: Read first chapter 2 of CODIX 544
and go on at page 13
Please note: Read first chapter 2 of CODIX 544
and go on at page 16
Please note: Read first chapter 2 of CODIX 544
and go on at page 19
1. Description
CODIX 544 is a multipurpose device. Depending on
the programmed basic function the device
operates like
• the adding counter and position indicator
CODIX 541 (page 13) or
• the frequency meter CODIX 542 (page 16) or
• the time meter CODIX 543 (page 19)
2. Setting of the operating
parameters
a. Hold down keys on front panel and switch on
supply voltage.
b. The display shows
c. After releasing the keys the display alternates
between menu title and corresponding menu
item with a frequency of 0.5 Hz. After any key is
pressed, only the menu item is displayed.
d. Pressing the right key, the menu item will be
switched to next value.
e. Hold down the left key and press the right key
to switch to the next menu title.
f. After programming the last menu item, the
programming routine will be left and the new
values will be stored by switching the menu
item to „YES“. If you chose „NO“, the
programming routine will be passed through
once again.
3. Programming routine
The first menu item is the basic function
Operating mode pulse
counter.
See programming routine
CODIX 541 (page 13)
Operating mode frequency
meter.
See programming routine
CODIX 542 (page 16)
Operating mode time
meter.
See programming routine
type CODIX 543 (page 19)