User manual

7 Programming
7.1 Entering the programming
Simultaneously press the UP key
and the DOWN key for 3 sec.
The security prompt appears
alternately in the display
Programming can be exited
again using the ENTER key.
Press the UP key or DOWN key
to continue with the
programming.
The security prompt YES
appears in the display
Enter the main menu by pressing
the ENTER key
The first menu item in the main
menu appears in the display
When ending the programming via PROG.
NO the counter contents are
not
reset.
7.2 Selecting the main menus
The main menus are selected
using the UP and DOWN keys
Indicated by LED1
7.3 Entering a sub-menu
Press the ENTER key.
The first parameter is displayed
with the current setting flashing.
Indicated by LED1 and
LED2
7.4 Selection of the parameters in a
sub-menu and return to the
main menu
The RIGHT always displays the
following parameter. The LEFT
key allows returning to the last
parameter or also returning to
the main menu.
Indicated main menu by LED1
7.5 Changing parameter values
Press the ENTER key.
Change the parameter value
using the UP or DOWN keys.
Press the ENTER key.
The new setting is again
displayed flashing.
7.6 Setting count values
Press the ENTER key.
Select the decade using the
RIGHT key or the LEFT key.
Ö the corresponding
decade flashes
Change the count value using
the UP key or the DOWN key.
Press the ENTER key.
The new setting is again
displayed flashing.
7.7 Ending the programming
Select the menu item
Pressing the ENTER key
acknowledges this prompt and
allows the programming to be
repeated. The previously-
programmed values are
preserved. These can now be
checked or changed once again.
Pressing the UP key or the
DOWN key selects the
termination oft he programming.
The security prompt YES
appears in the display
Pressing the ENTER key
acknowledges this prompt and
terminates the programming; the
modified settings are saved in
the EEPROM.
The text SAVE is shown in the
display for 2 sec.
Page 6
www.kuebler.com