User manual

7.8.5.6 Main menu for Preset 2
Output signal
ADD mode output operations:
permanent signal at Output 2,
becomes active when count
>
Preset 2
SUB mode output operations:
permanent signal at Output 2,
becomes active when count
<
zero
ADD mode output operations:
permanent signal at Output 2,
becomes passive when count
>
Preset 2
SUB mode output operations:
permanent signal at Output 2,
becomes passive when count
<
zero
ADD mode output operations:
timed signal at Output 2,
becomes active when count
>
Preset 2 (Activation only in
positive direction).
SUB mode output operations:
timed signal at Output 2,
becomes active when count
<
zero (Activation only in negative
direction)
ADD mode output operations:
timed signal at Output 2,
becomes passive when count
>
Preset 2 (Deactivation only in
positive direction)
SUB mode output operations:
timed signal at Output 2,
becomes passive when count
<
zero (Deactivation only in
negative direction).
ADD mode output operations:
timed signal at Output 2,
becomes active with positive
direction and when count
>
Preset 2 and subsequently with
negative direction and when
count
<
Preset 2
SUB mode output operations:
timed signal at Output 2,
becomes active with negative
direction and when count
<
zero
and subsequently with positive
direction and when count >
zero
ADD mode output operations:
timed signal at Output 2,
becomes passive with positive
direction and when count
>
Preset 2 and subsequently with
negative direction and when
count
<
Preset 2
SUB mode output operations:
t
imed signal at Output 2,
becomes passive with negative
direction and when count <
zero
and subsequently with positive
direction and when count >
zero
Duration of timed signal of
Output 2
programmable from 00.01 to
99.99 sec.
Timed signal is post-triggered
Active:
Relays are activated when the preset
value is reached.
Passive:
Relays becomes de-energized when the
preset value is reached.
Timed outputs that have started are
not
aborted by a RESET.
8 Operation
8.1 Switching the display during
operation
Pressing the DOWN key or the
UP key once causes the name of
the currently selected display
function to be displayed for 2
sec. If within this time the DOWN
key or the UP key is pressed a
second time, then the display
switches to the next or previous
display function. This is
confirmed by displaying the new
name for a period of 2 sec. After
2 sec the count value that
corresponds to the selected
display function is displayed.
t = 2 sec
Main counter
Batch counter
Total counter
Preset 1
Preset 2
8.2 Setting the presets
8.2.1 Setting via front keys
Using the UP key or the DOWN
key, select the preset to be
changed, either PRES1 or
PRES2 (see 8.1).
Page 14
www.kuebler.com