Product Overview

K-FLEX TITAN
TM
CLOSED-CELL, FLEXIBLE, ELASTOMERIC FOAM
INSULATION WITH A FLEXIBLE CO-EXTRUDED
JACKETING
K-FLEX  TITAN
TM
SPECIFICATION COMPLIANCE
• 2012 IECC
-Section R403.3.1 (residential)
-Section C403.2.8 (commercial)
• 2015 IECC
-Section R403.4.1 (residential)
-Section R403.2.10.1 (commercial)
• 2013 California Energy Code, Part 6
-Subchapter 3, Section 120.3
• ASTM E84 25/50-rated (to 1”)
DESCRIPTION 
K-FLEX TITAN
TM
is a flexible co-
extruded jacketed composite material
that can be applied to either K-FLEX
®
NBR/PVC or EPDM (TITAN
TM
HT) tubular
insulation. It is a polymeric jacketed
material that offers excellent flexibility,
abrasion and weather resistance,
making it ideal for outdoor applications.
The product is made in K-FLEX USA’s
ISO 9001 certified manufacturing
facility, in North Carolina.
K-FLEX TITAN
TM
is black in color
and is available in ½”, ¾” and 1”
wall thicknesses, non-slit, 6’ length
tube form. It is available in diameter
sizes ranging from ½” I.D. to 2-7/8”,
2-3/8”, and 1-5/8”, respective to the
aforementioned wall thicknesses.
K-FLEX TITAN
TM
can be used for
outdoor applications with service
temperatures ranging from -70 °F to
+300 °F. The applications would be
consistent with those recommended
for K-FLEX Insul-Tube or K-FLEX HT
tubing. The product is used to enhance
the weather and abuse resistance of
the insulation tubing. K-FLEX TITAN
TM
is ideal for use on HVAC linesets and
flex hose applications. K-FLEX TITAN
TM
HT (EPDM) is ideal for use on heat
pumps and solar hot water heating
where higher service temperatures are
expected (300 °F).
K-FLEX TITAN
TM
provides excellent
UV resistance and protection from
weather. K-FLEX TITAN
TM
’s proprietary
copolymer blend jacket provides
excellent protection from mechanical
abuse, including incidental impact from
lawn equipment such as weed wackers
(plastic string type).
K-FLEX TITAN
TM
is durable (non-
fracturing) and the skin is resistant
to tearing from handling and the
environment, safe to handle (nondusting
and non-abrasive), and lightweight for
an efficient installation. It is very flexible
and easily conforms to bends. Its low
modulus allows it to be pushed back for
easy installation of fittings.
K-FLEX recommends that insulation is
installed on non-operational systems
with clean, dry surfaces in ambient
conditions between 40 °F and 100 °F.
Properly sized insulation tubing can
be slid over piping (tubing should be
pushed, not pulled). All seams, butt
joints, termination points and open ends
should be sealed with an approved
contact adhesive, making sure both
surfaces to be joined are coated.
Vapor stops should be installed as
needed. K-FLEX TITAN
TM
may be slit
longitudinally for retrofit applications.
ASTM C1710, Installation Guide for
Flexible Closed
Cell Foams, and the K-FLEX
Installation Manual should be used as
comprehensive installation guides.
The expanded closed-cell structure and
unique formulation inherently resists
moisture vapor intrusion. K-FLEX
TITAN
TM
needs no additional protection.
OUTDOOR APPLICATION 
RESISTANCE TO
MOISTURE VAPOR FLOW 
Made in USA
The K-FLEX USA website contains the most recent version of all K-FLEX USA literature.
Please refer to the website for current versions of K-FLEX USA literature at www.kflexusa.com
AVAILABILITY 
APPLICATION 
INSTALLATIONS 
PATENT PENDING