User Manual

• Maintain tools with care. Keep cutting tools sharp and clean.

Properly maintained tools, with sharp cutting edges are less likely to

bind and are easier to control.

• Check for misalignment or binding of moving parts,

break- age of parts, and any other condition that may affect

the tool’s operation. If damaged, have the tool serviced before

using. Many accidents are caused by poorly maintained tools.

• Use only accessories that are recommended by the

manufacturer for your model. Accessories that may be suitable

for one tool, may become hazardous when used on another tool.

ADDITIONAL SPECIFIC SAFETY

INSTRUCTIONS FOR ANGLE GRINDER

• Always use proper guard with grinding wheel. A guard protects

operator from broken wheel fragments and wheel contact.

• Accessories must be rated for at least the speed

recom- mended on the tool warning label. Wheels and other

acces- sories running over rated speed can fly apart and cause injury.

Accessory ratings must be above listed minimum wheel speed as

shown on tool nameplate.

• ALWAYS WEAR EYE PROTECTION WHEN USING THIS TOOL.

• Use of accessories not specified in this manual is not reco-

-mmended and may be hazardous.Use of power boosters that

would cause the tool to be driven at speeds greater than its rated

speed constitutes misuse.

• Do not use circular saw blades or any other toothed blades

with this tool. Serious injury may result.