Setup instructions
SAFETY INSTRUCTIONS
1. COMPONENTS
Please visually check whether - as far as can be seen -
all components are present and undamaged:
a
.1 Adapter plate
a.1 Threaded bolt M6 x 11 mm (2x)
a.2 Locking nut with flange M6 (2)
a.2 In the accessory bag:
b.1 Insulating washer ø 6,2/15 mm
b.2 Washer ø 6,4/12 mm
b.3 Cylinder head screw M6 x16 mm (SW5)
c.1 Insulating washer ø 8,2/15 mm
c.2 Washer ø 8,4/16 mm
c.3 Cylinder head screw M8 x 20 mm (SW6)
2. PREPARATORY MEASURES
THREE THINGS must be checked before mounting the screen.
2.1 HOLE PATTERN (=distance of the threaded holes on the rear
2.1 HOLE PATTERN of the screen: 200 x 200 mm or 400 x 400 mm)
2.2 SIZE OF THREADS (common are: M6 or M8 - suitable screws
2.2 HOLE PATTERN are included (see b and c.1.2.3)
2.3 MAXIMUM INSERT DEPTH
2.3 (ing to VESA -M8: max. 15 mm, -M6: max. 10 mm)
2.3.1 The screen has "adjacent" threaded holes:
2.3.1 The screw sets (b, c) fit the maximum screw-in depth.
2.3.2 The screen has recessed threaded holes. The "recess" is deeper
2.3.2 than 2 mm and measures more than ø 15 mm; this requires:
2.3.2 a ...the insulating washer to be mounted from the outside and not the
2.3.2 a inside, otherwise it might come loose from the borehole
2.3.2 b additional longer screws, which should not exceed the maximum
2.3.2 b screw-in depths
2.3.2 b (Example: recess 5 mm, new: M6 x 20 mm)
2.3.3 Super-flat screens may require shorter screws:
2.3.3 - refer to the specifications of the screen manufacturer.
3. MOUNTING the ADAPTER PLATE to the SCREEN
3.1 Mount the adapter plate to the screen using the appropriate screw set
3.1 (M6 or M8; see chapter 2).
3.2 NOTE (see also 2.3.2): For recessed threads on the screen:
3.2 "recess" depth >2 mm and ø >15 mm -> mount insulating washer
3.2 at the front
4. MOUNTING: ADAPTER PLATE/SCREEN to the
4. - 19610 ADAPTER oder
4. - 24496 SPEAKER CEILING MOUNT
4.1 Ensure that the locking nuts a.2 are screwed onto the threaded bolts a.1
4.1 of the adapter plate keeping at least 4 mm distance to the plate.
4.2 Then hook them into the bracket of 19610 or 24496.
4.2 NOTE: Please also refer to the instructions for item:
4.2 NOTE: 19610 - to chapter 3.b or for 24496 - to chapter 5.b.
4.3 Tighten locking nuts with spanner (SW10) (10 Nm).
Thank you for choosing this product. Please read and follow these instructions carefully
before installation and use. They inform you about all important steps regarding assembly
and handling. We recommend that you keep them for future reference.
INSTALLATION INSTRUCTIONS
19618 Adapter plate VESA
19618 MIS-F 400x400
INTENDED USE:
- The adapter plate enables the attachment of monitors or screens
- to wall, ceiling or stand brackets from the K&M range:
- wall - 24471, 24481; ceiling - 24496; stand - 19780, 19610
FEATURES & CAPABILITIES
- The load capacity depends on the used bracket
- To attach the screen, the adapter plate offers:
- a. two hole pattern: 200 x 200 as well as 400 x 400 mm
- b. one fastening set each in M6 and M8 (suitable for both hole patterns)
- For mounting on the bracket, the adapter plate has:
- c. two threaded bolts M6 x 11 mm at a distance of 70 mm ( vertically);
- d. two hexagon nuts with clamping part and flange M6 (ISO 7043)
- Technical data: Dimension (packing size) 420 x 420 x 3/14 mm, weight 1,2 kg
- Load capacity: 25 kg, subject to the maximum load capacity of the bracket.
- Visually inspect the product: damaged parts must not be used and should
- be either replaced or repaired.
- Only attach suitable screens or speakers. Pay attention to:
- -connecting dimensions (hole pattern, thread, screw-in depth), size and
- weight.
- The screw connections between the adapter plate and the screen must
- always be firmly tightened; please check regularly for tightness and when
- necessary, restore initial state.
- PLEASE NOTE! The adjustment possibilities of the brackets may be limited
- because the screen may touch the wall/ceiling/tripod/surroundings due to
- its size.
- Careful handling is required, as the adjustment possibilities may have hidden
- risks of entrapment.
- Protect installation from moisture and humidity
- Observe the safety guidelines for the monitor/screen and bracket.
1. COMPONENTS
2. PREPARATORY MEASURES
3. MOUNTING 19618
3. to the SCREEN
4. MOUNTING
3. 19618 to
3. 19610 / 24496
Art. 19610
Adapter
Art. 24496 Speaker ceiling mount