Setup instructions

MAINTENANCE
FAULT-FINDING (F) and REPAIR (R)
TECHNICAL DATA
5. ASSEMBLY
5.1 PREPERATION
5.1.1 Unscrew locking nuts
5.2 MOUNTING
5. ASSEMBLY:
5. ADAPTER PLATE/SCREEN on
5. - 24471/81 SPEAKER WALL MOUNT or
5. - 19780 INCLINABLE STAND ADAPTER
5.1 PREPERATION
5.1.1 The 19618 adapter plate is delivered with locking nuts a.2
5.1.1 screwed on.
5.1.1 These must be removed from the threaded bolts.
5.1.2 The adapters 24471, 24481 and 19780 are provided with a
5.1.2 swivel bracket, which must be first separated from the
5.1.2 holder by completely loosening the lower of the two screw
5.1.2 connections (please refer to the user instructions of the
5.1.2 corresponding products).
5.2 MOUNTING
5.2.1 Slide the swivel bracket over the threaded bolts of the
5.2.1 adapter plate...
5.2.2 ...and subsequently attach it with the locking nuts a.2.
5.2.2 Tighten with spanner SW10 with 10 Nm.
5.2.3 Hook the swivel bracket (with plate/screen) into the holder.
5.2.4 Secure the suspended swivel bracket by mounting the lower
5.2.4 screw connection using the parts from item 5.1.2.a.
- Careful handling maintains functioning, load-bearing
- capacity and longevity of all the products.
- Periodical activation of all moving parts maintains their
- mobility
- Maintenance work may only be carried in unloaded
- condition
- Damaged parts must not be used and should be
- replaced or repaired.
- Dirt, moisture and, when applicable, corrosion must be
- removed
- For cleaning and care, use a slightly damp cloth and a
- non-abrasive cleaning agent
F: Adapter plate wobbles
F: B: Check screw connection on bracket for
F: B: tightness; retighten if necessary.
F: B: Check threaded bolts of adapter plate
F: B: for tightness; if they wobble stop using
F: B: the adapter plate.
F: Load wobbles:
F: B: Check screw connection adapter plate
F: B: for tightness; retighten if necessary.
F: B: Do the connecting dimensions (■200/■400)
F: B: of the load fit the adapter plate?
F: B: Do the threaded holes of the load fit to
F: B: the adapter plate (M6/M8)?
F: B: Are the threaded holes of the
F: B: monitors/speakers not deep
F: B: enough for the attached screws?
F: B: See information in chapter 2.3.
Material
- Adapter plate: steel, powder-coated
- Thread, washers: steel, galvanised
- Insulating washers: Plastic (PA)
Load capacity
- Screens, loudspeakers with suitable
- connection dimensions
Load-bearing capacity
- max. 25 kg, subject to the
- bracket used
Dimensions
- Hole pattern:
- VESA 200 x 200 mm, 400 x 400 mm
- for M6 and M8
- External dimensions:
- 420 x 420 x 3(14) mm
- Weight: 1.2 kg
Cardboard box
- 580 x 430 x 55 mm; 0.5 kg
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2, 97877 Wertheim, www.k-m.de
19618-000-55 Rev.03 03-80-613-00 11/21
5.1.2 Remove the swivel bracket
5.1.2 from the holder
5.2.1 Slide on
5.2.1 swivel bracket
5.2.3 Hook in swivel
5.2.3 bracket
5.2.4 Assemble screw
5.2.4 connection (see 5.1.2.a)
5.2.2 Tighten locking
5.2.2 nuts (10 Nm)