Setup instructions

Storage, disposal
Store the tablet PC stand holder in a dry place.
Recycle disassembled components:
u Scrape all components made of metal.
u Recycle or reuse all plastic, paper, and cardboard components.
u Sort all other components according to material composition and dispose of them
u according to local regulations.
Contact information
KÖNIG & MEYER GmbH & Co. KG
Kiesweg 2
97877 Wertheim
Germany
Phone: [phone]
Fax: [phone]
E-Mail: [e-mail]
Web: www.k-m.de
19766-000-55 Rev.05 03-80-509-00 11/21
Fault and troubleshooting
Fault/cause Check/Remedy
Tablet cannot be clamped
in the holder
● Check the clamping range, if necessary adjust the clam-
● ping range on the slider with the help of the second hole.
Tablet PC holder is unstable or
wobbles
● Check the screw connections and retighten if necessary.
Maintenance, cleaning and repair
u Maintenance: Regularly check if the screw connections are tight.
u Cleaning: Use a slightly damp cloth to clean the tablet PC stand holder. Do not use chlorina-
u ted or abrasive cleaning agents. These can cause damage to the surface and varnish.
u Repair: Immediately repair any damage that occurs and stop using the tablet PC stand holder.
u Maintenance work may only be carried out if you have the necessary knowledge. If any parts
u are missing, contact the manufacturer at www.k-m.de. Here you can find a corresponding
u spare parts list by entering the article number. Use this page to reorder missing or damaged
u components.