Owner's Manual

5. MOUNT EXAMPLES
A. Concrete wall. Example: Bolt anchor M8 x 75 mm
A. - drill, clean hole, hammer in the anchor, mount the bracket. Set the U disk, tighten the nut with 20 Nm.
B. Perforated brick: Example: Plastic frame anchors ø 10 x 100 mm with wood screw DIN571 ø 7 x 105 mm
B. - drill, clean hole, set the anchor, mount the bracket. Set the U disc, tighten the screws.
C. Suitable for both concrete and perforated brick: Injection molded anchor
C. - without sieve bushing for concrete wall.
C. - with sieve bushing for perforated bricks.
C. Advantage: mount without expansion; as such the mount can be used as often as needed and ensures mounting right up to the
C. edge (not under 100 mm distance).
C. Please follow the assembly/mounting instructions provided with the products.
4. WALL MOUNT
- Place the mount in a vertical position and mark
- the bore holes
- Drill the anchor holes 4x
- (ø 8 for the bolt anchor; ø 10 for frame anchor)