Instruction Manual

7
QSETS
Qsets are “Quick Settings” that are customized calls or sequence of calls
that are quickly accessible. There can be up to 5 Qsets saved at a time,
each with a dedicated button (Q1-Q5).
To CREATE a Qset:
1. PRESS the Qset button desired to be mapped. For example, if you want
to create a Qset for button Q3, PRESS the Q3 button. (note: if a button is
already associated with a custom call it will arm the call.)
2. Once within the Qset select the MODE (Sequential or Overlay)
Sequential: Calls played in order of position in the Qset Calls Slots. Affected
by Call delay between calls. Up to 5 Calls can be selected for Sequential
playback.
Overlay: Two Calls mixed together and played at the same or varying times.
Each sound can add a delay before playback.
3. Add the Sound Files to the Call Slots by selecting a Call Slot.
4. Once a Call Slot is selected the menu will navigate to the Calls Library.
5. From the Calls Library locate the call you would like to add to the Call
Slot and PRESS ENTER.
6. After select the desired Volume Playback.
7. Set the Post Delay (Sequential – Delay after sound plays) or Pre-Delay
(Overlay – Delay before sound plays)
8. Select desired Speaker Output (note External Speakers will only play
with auxiliary speaker connected to the base – not included)
9. Repeat until desired calls have been added.