User's Manual

ManualsBrandsK-Mark Industrial ManualsElectronicsMantis Pro400 Game Caller Remote Control

Mantis Pro Operation

POWER ON

Slide the power switch on the base to power the unit on. Press and hold the

power button on the remote to power the remote on/off. Be sure to extend the

remote antenna for maximum range.

MAIN MENU

Main Menu is the Default Screen when the remote is powered on. Three menu

options available: Call Library, Settings, and Bluetooth. Use the up and down

buttons to scroll to the desired directory and press enter to navigate to that

directory.

CALL LIBRARY

The Call Library allows access to User Sound Files stored on a user supplied SD

Card, a Favorites directory, and pre-installed sound files grouped into categories.

Use the up and down buttons to scroll to the desired directory and press enter to

navigate to that directory. Pressing the back button will return to the Main Menu.

CALL LIST

The Call List is a group of sound files that belong in a specific category. Use the

up and down buttons to scroll through the list of calls. Pressing the play button

when a call is highlighted will play that call. Pressing the play button while a call is

playing will stop the call. Pressing the back button will return to the Call Library.

Pressing the enter button has no effect.

SETTINGS

Here you can choose the settings for Decoy Movement, Repeat Delay, Backlight

Operation, Channel Selection, and About. Use the up and down buttons to scroll to

the desired directory and press enter to navigate to that directory. Pressing the

back button will return to the Main Menu. Pressing enter on Decoy will toggle

between “Decoy On” and “Decoy Off”.

Volume

Level

Repeat On

Decoy On

Battery Level

Repeat Delay

Set the delay between calls

when repeat is turned on.

Random will choose either

1, 3, or 5 second delay at

random.

Backlight Mode

Set the mode for backlight

operation to manual (so the

button has to be pressed),

or auto (any button press

activates the backlight).

Channel Select

Change the channel that the

remote is set to. The

remote and base have to be

on the same channel in

order to communicate.

About

Displays the current

software version for the

remote and the base. Press

and hold enter for factory

reset.