User's Manual
Base Unit Battery Door
• Battery door is located on the bottom of the Mantis PRO 100 base
unit.
• Remove the retaining screw on the battery door. Insert 8 “AA”
batteries noting the correct polarity (+) and (-).
***Do NOT mix old & new batteries***
Remote Battery Door
• Remove the retaining screw on the battery door
• Insert (1) 9V battery noting the correct polarity (+) and (-)
Quick Sets
• There are 3 Quick Set profiles.
Each Q-Set has a Sequential Play
setup and an Overlay setup.
Pressing Q1-Q3 will arm the
quick set. Holding Q1-Q3 will
prompt to clear the Quick Set.
Back Button
• Returns to the previous screen
(if applicable).
Up/Down Arrow
• Navigates up and down.
Volume Down/Up
• Decreases and Increases the
volume of the base unit.
Backlight Button
• Toggles the backlight on and off.
Favorites Button
• User defined sound profile that
contains up to 20 saved sounds.
Pressing “FAV” will navigate to
the Favorites menu. Holding
“FAV” will prompt to clear all
saved sounds.
Call Library
• Navigates directly to the Call
Library screen.
Repeat Button
• Toggle sound repeat on and off.
Enter Button
• Selects/Navigates to highlighted
option.
Play Button
• Plays the highlighted call or
sequence. If the call or sequence
are playing, pressing play will
stop the sound.
Battery Installation Instructions
Remote Functions and Features